Currently Shopping by
-
performance:
Electrical
Exhaust
Steering & Suspension
Turbo
-
Brands:
Flow Designs
Leyo Motorsport
P3 Cars
Supernova
SuperPro
T-carbon
- Filter By cosmetics
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Vehicles - Leyo Motorsport - Supernova - SuperPro - T-carbon - P3 Cars - Flow Designs
LEYO AIR Cold Air Intake System
Description:
LEYO Cold Air Intake System for the Polo GTI (AW) guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
​
LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 3’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. Factory MAF sensor part is used to prevent anomaly in MAF sensor reading.
LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance. Specially designed airbox prevents heat soak, effectively extracting colder induction air. No fabrication required for installation, bolts straight onto factory mounting points.
​
Note:
-Only for petrol EA888.3b MQB cars, not for diesel cars.
-Only for vehicles with air flow sensor on factory intake.
-This product is only for use on the race track.
​
Specifications:
-
OEM fitment requires no fabrication.
-
3' inch diameter for greater air induction.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Heat shield included.
-
Direct bolt on & easy installation.
-
Easy installation.
-
Intake Heat shield.
$699.99-
LEYO - Diverter Valve Kit
Description:
Struggling with the OEM Turbo Valve? Need to add that unique boost pressure sound? Make sure to get your hands on All New Re-Designed Leyo Motorsports latest in-house designed Diverter Valve. Leyo Motorsport Diverter Valve multi piece design is built and engineered to solve the failure issues associated with the OEM solenoid valves and their diaphragm resulting in boost leaks. It is built from 6061 Billet Aluminum with hard coated Anodized finish with an internal serviceable piston based design that provides greater reliability over the OEM as well as quicker throttle and turbo response. All components are made in-house by Japan CNC’s, inspected to 0.01mm tolerance by Japan CMM, laser etched and race proven.
Leyo Motorsport Diverter vavle has a unique and fully tested internal piston compared with other brands in order to get the maximum results in power. We are offering a stronger, more durable and reliable valve compared to the OEM unit. We do have uprated valve spring in stock that is sold separately.
Specifications:
-
Made from the highest quality T6061 billet aluminium construction.
-
Direct OEM replacement..
-
Improved throttle response
-
Consistent turbo boost.
-
Reduced turbo lag .
-
Fully compatible with OE electronics.
-
Fully serviceable piston .
-
Holds up to 600HP. (with optional uprated spring kit)
* Note : This DV kit comes supplied with BLACK / WHITE / YELLOW Spring. Uprated BLUE / RED Spring is Available for purchase.
SUGGESTED SPRING INSTALLATION
Above figure is only preference. Please refer vehicle modification needs.
$399.00-
LEYO Blow Off Valve Kit
Description:
Struggling with the OEM Turbo Valve? Need to add that unique boost pressure sound? Make sure to get your hands on the All New Re-Designed Leyo Motorsports latest in-house designed Blow Off Valve. Leyo Motorsport Blow Off Valve's multi piece design is built and engineered to solve the failure issues associated with the OEM solenoid valves and their diaphragm resulting in boost leaks. It is built from 6061 Billet Aluminum with hard coated Anodized finish with an internal serviceable piston based design that provides greater reliability over the OEM as well as quicker throttle and turbo response. All components are made in-house by Japan CNC’s, inspected to 0.01mm tolerance by Japan CMM, laser etched and race proven.
Leyo Motorsport Blow Off Valve has a unique and fully tested internal piston compared with other brands in order to get the maximum results in power. We offer a stronger, more durable and reliable valve compared to the OEM unit. We do have uprated valve spring in stock that is sold separately.
Set yourself apart from the rest of the boosted crowd and get your vehicle the best automotive Blow Off Valve available at Leyo Motorsport.
Specifications:
-
Made from the highest quality T6061 billet aluminium construction.
-
Direct OEM replacement.
-
Improved throttle response.
-
Consistent turbo boost & Prevent boost leak.
-
Reduced turbo lag .
-
Fully compatible with OE electronics.
-
Fully serviceable piston .
-
Great sound.
-
Holds up to 600HP (with uprated spring kit) .
$399.00-
LEYO - HIGH FLOW TURBO INLET PIPE
Description:
The higher the boost, more fuel and air is needed. To solve the issue with turbo lag, we’ve created our own designed Leyo Motorsport turbo inlet pipe. This full aluminium piece increases the reliability and unrestricted airflow direct to your turbocharger. With Leyo Motorsport’s research and developers, we’ve manufactured what we believe to be one of our best and most important performance product, the Leyo Motorsport turbo inlet pipe. More air being sucked into your turbo will allow horsepower gains not seen from OEM units. We’ve enhanced the size of the inlet pipe to give better throttle response, more linear power feed, and more leeway when tuning your performance vehicle.
Be sure you’re quick to order as demand is currently through the wastegate.
Specifications:
-
Full aluminium tubing.
-
CNC Aluminum OEM neck for secure fitment.
-
Fits all Air Intake system on the market.
-
Smooth, more linear power gains.
-
Larger than the OEM unit for increased air flow.
-
Simple installation.
-
Powder coated & laser etched logo.
-
Race Track Proven.
$199.00-
SuperPro Rear Swaybar Link Kit HD Adjustable Fits Audi Seat Skoda VW
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
- Ball for low friction and long life
- Elminate sway bar flex for consistent handling
- Spanner provision for on-car adjustment
- Suitable for application on lowered or raised vehicles
Features and Benefits:
- 6060-T5 Alloy Link Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
- SuperPro Tip To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.$199.00
Hyundai i30(n) - Remnant License Plate LED (Pair)
Description It's the little details that bring a car together. Our LED number plate lights will provide your car with a modern, defined look. Update the exterior ambience of your vehicle to a crisp, 6000k pure white light with the plug n play i30N License Plate LEDs. Features Plug n Play 6000k Hyper-white Error Free, no coding needed. New revised design 12 month warranty.Regular Price: $34.00
Special Price $27.00
Hyundai i30(n) - High Output Remnant Reverse LED (Pair)
Description New Remnant Series - Only the brightest Remnant series is reserved for only the highest output LEDs. To date, no COB leds, 5050SMD or fake cree LEDs have made the cut. We didn't need to reinvent the wheel to create the ultimate i30n Reverse LED. The design focus is to have the highest output LED, be CANBUS error free, have a solid heat sink for thermal cooling and achieve the highest brightness possible. Built to last, solid metal heat sink core with constant current inductor. Easy install, no tools or wiring needed, plug n play. Built to last with 12 month warranty. Approx. 700 lumen per light at 6000k Hyper white Model Fitment: Hyundai i30, i30n$35.00
Flow Designs - Lancer Evolution X Window Vents (Pair)
https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf$175.00
Flow Designs - MK3 Focus RS Rear Spoiler Extension
FAQ HOW IS YOUR SPLITTER SO STRONG? Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper. WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) WHAT ABOUT CARBON FIBRE? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable. USE OF ABS PLASTIC Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.$399.00
Flow Designs - MK7 Golf R Wagon Rear Aero Valance & Pods/Spats
DETAILS
The VW MK7 Golf R splitter set from Flow Designs includes a front splitter with Aerospacers, side splitters, rear spats & rear valance. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong.
KIT INCLUDES
- MK7 Golf R rear aero valance
- MK7 Golf R rear pods/spats (pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL
- 10mm thick polyethylene composite, bevelled edges
FINISH
- Hand polished satin black
$304.00
SAFE & SECURE SHOPPING
