IE Harsh Climate 5" Oiled Air Filter & Sock Upgrade Kit

EXPLORE WITH CONFIDENCE

Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.

KIT DETAILS

This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.

KIT CONTENTS:

1X IE oiled 8 pleat density performance 5" filter
1X IE pre-filter intake sock
1X Air filter worm clamp

RECHARGING

As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.

COMPATIBLE INTAKES

Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.

IEINCI11 - IE MQB 2.0T/1.8T Gen 3 Cold Air Intake
IEINCK3 - IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
IEINCG2A - IE Audi 3.0T Cold Air Intake For B8/B8.5 S4 & B8.5 S5
IEINCN1 - IE Audi 3.0T Cold Air Intake For C7 A6 & A7
IEINSG1 - IE Audi 3.0T Cold Air Intake For 8R SQ5 & Q5
IEINCG1 - IE Audi 2.0T TSI Cold Air Intake For B8/B8.5 A4 & A5
IEINCK1 - IE Audi B9 A4 & A5 Cold Air Intake
IEINCW1 - IE Cold Air Intake System For VW MQB Tiguan 2.0T
IEINCV1 - IE Performance Intake System For VW Atlas 2.0T
IEINCC2 - IE 2.0T TSI Cold Air Intake For VW MK5, MK6 GTI, Jetta, CC & 8P A3
IEINCB4 - IE 2.0T FSI Cold Air Intake Kit For MK6 Golf R, A3, MK5 GTI, Jetta
IEINCC4 - IE Gen 3 2.0T/1.8T Cold Air Intake For 2013-2018 MK6 Jetta & GLI
IEINCJ1 - IE Carbon Fiber Intake For Audi TTS MK2
IEINCI4 - IE VW 1.4T Cold Air Intake For VW MK6 Jetta

$129.00

Out of stock

IE Air Intake System For Audi B9/B9.5 SQ5 3.0T

The IE Performance Air Intake System for your Audi B9/B9.5 SQ5 delivers significant airflow gains from a high-quality polymer design. Enjoy increased performance from dramatically improved turbo and engine efficiency while maintaining low intake air temps for up to 19HP & 21ft-lbs on tuned engines. Add instant power, sound, and fun without sacrificing style or quality with our premium air intake system for your S-class V6 turbocharged SUV.

ONE-PIECE
POLYMER
DESIGN

REAL POWER
+19HP & 21TQ
WITH ECU TUNE

INTEGRATED
VELOCITY STACK
HIGH FLOW

LEADING FEATURES

Rotomold polymer for superior heat resistance
Up to 19HP & 21ft-lbs over stock (with software)
Flow 24% more than the factory airbox
Flow 50.4% more than stock with IE turbo inlet
Increased turbo & engine sounds
Maximized turbo & engine efficiency
Huge 5" air filter for excellent laminar flow
Integrated velocity stack for smooth airflow
High pressure & low pressure air zones
Designed for stock turbo and hybrids (with IE turbo inlet)
Factory style mounts for reliable & easy installation
All stainless hardware
Multi-ply silicone with stop-flat edges
High-quality clamps
Powder-coated aluminum filter plate & velocity stack
Stainless laser-etched logo plate

ROTOMOLD POLYMER

A special rotational molding method is used to manufacture a robust single-piece intake with consistent wall thickness, strong corners, and superior heat resistance. This also allows for complex shapes and angles to maximize internal volume for air supply and smooth flow for the most performance available. Enjoy a performance air intake without compromise.

SEAMLESS DESIGN

The entire intake is designed as a single piece airbox to offer a seamless and complete look with an above factory quality fit and finish.

BUILT-IN VELOCITY STACK

The built-in velocity stack creates a smooth transition from the large filter area to the turbo inlet. This motorsport design offers excellent laminar properties resulting in a very high inertia flow with reduced drag and power-robbing turbulence.

OPTIONAL TURBO INLET

Our intake airbox is designed to accept our cast turbo inlet pipe to increase airflow over stock from 24% (intake only) up to 50.4% combined! Adding a turbo inlet further reduces significant air restrictions while maintaining the largest size possible from the airbox to the turbocharger.

Turbo inlet pipe is an optional upgrade and can be purchased with your intake or added at a later date.

HYBRID TURBO READY

The intake and turbo inlet combo makes upgrading to a hybrid turbo a simple bolt-in job. CNC-machined and o ring sealed adapter rings fit the stock or a variety of aftermarket turbos without hassle. The turbo inlet continually adapts to the turbo to not introduce any restrictions and maintain the largest size possible when upgrading turbos.

Hybrid turbo adapter rings are sold separately from the turbo inlet upgrade.

IE SQ5 POLY INTAKE SYSTEM & TURBO INLET PIPE INSTALLED WITH PURE750 TURBO

MULTIPLE PRESSURE ZONES

Multiple air supply avenues are used to guarantee airflow for any power level. High-pressure flow from the grille directly provides a ram air supply to the filter. If additional air demands are required, the intake will pull low-pressure air through the filter plate louvers as needed. This dual-zone design ensures your intake will never be a power limitation for even the most extreme builds.

PERFORMANCE SOUND

Your stock airbox is manufactured under regulations to perform only one job; mute all engine and turbo sound at any performance cost. Your new IE poly intake system will release the sweet sounds of turbo spool, engine throttle, and diverter blow-off that your S-class SUV deserves.

PRECISION DESIGN

3D scanning tools are leveraged to create a high-resolution digital environment allowing our engineers to take advantage of all available space for a complete performance design while ensuring a hassle-free install.

$899.00

Out of stock

Drive Mode Activation for VAREX Smartbox

OEM Drive Mode Factory Control 3 pin PWM to VAREX Smartbox.

Are you looking to add a little more control and customization to your Varex equipped exhaust system? Look no further! We are excited to announce the release of our Drive Mode feature for our Varex Smartbox controller unit.

This feature will allow you to control your Varex equipped exhaust system from the OEM Drive Mode vehicle controls, making it easier and more convenient than ever before.

$30.00

Out of stock

XFORCE Resonator Delete Kit - VW MK7/MK7.5 GOLF GTI

Sale

XFORCE Resonator Delete Kit - VW MK7/MK7.5 GOLF GTI

Xforce is proud to announce our resonator delete kit for the MK7/MK7.5 Golf GTI platforms.Get all the benefits of using this resonator delete (based on factory Audi part) without the high price tag.

Regular Price: $180.00

Special Price $175.00

Add to Cart

XFORCE - KIA Cerato GT Sedan 2022-On Axleback Exhaust System

Description

3" Axle-Back Exhaust system

Features

KIA Cerato GT owners worldwide have fallen in love with Xforce Performance Exhaust systems for a reason.

The high-quality 304 stainless steel construction is built to look and sound amazing while lasting the distance for you to enjoy the miles in your Cerato GT. The high quality muffler provides a step up in terms of sound from the 1.6 Turbo engine.Experience the Enhanced exhaust sound,crackles & pops that KIA owners love,this Axle-back provides a step up in sound,upgrade to take your KIA Cerato GT to the next level.

3″ 304 Stainless steel Mandrel-Bent Pipework
3″ inlet – dual 2.5″ Outlet rear muffler
Quad 3.5″ Double-Wall Slant-Cut Tips
Straight-through Design for Maximum Performance and Sports Sound
Fits seamlessly to the factory OEM KIA mounting points.
All gaskets,Nuts & bolts included for fitment
Fits KIA Cerato GT Sedan facelift 2022 onward only. For all hatch models use ESKC19AS

$850.00

Add to Cart

XFORCE - Kia Cerato GT Sedan Black Tips

Description

Matte Black quad 4" tips

Features

Add the finishing touch of personalization to your KIA Cerato GT with our Matte Black coated 4″ outlet tips. The tips are supplied with the 304 stainless steel clamps and fit seamlessly to the Xforce catback system and provides a premium look to the rear of the KIA Cerato GT.

Matte Black with etched Xforce logo
Both left & right tips
4″ outlets
304 stainless steel
Clamp on for Xforce system

$210.00

Add to Cart

XFORCE - Kia Cerato GT Sedan Blue Tips

Description

Burnt Blue look quad 4" tips

Features

Add the finishing touch of personalization to your KIA Cerato GT with burnt blue 4″ outlet tips. The tips are supplied with the 304 stainless steel clamps and fit seamlessly to the Xforce catback system and provides a premium look to the rear of the KIA Cerato GT.