You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Vehicles - Integrated Engineering - Genuine VW - Autotech

Set Descending Direction

   

Items 21 to 30 of 62 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Genuine VW - FSI 2.0T Fuel Pump Cam Follower Genuine VW - FSI 2.0T Fuel Pump Cam Follower
    Sale

    Genuine VW - FSI 2.0T Fuel Pump Cam Follower

    VW has encountered a problem with the FSI camshaft and cam follower that could lead to damage to your engine's cylinder head.

    This small part can play quite a big role in your engine's well-being. It conveys the movement of your camshaft into power for the high pressure fuel pump by riding directly on the camshaft lobe.

     If it becomes worn to the point of breaking it can cause permanent damage to the camshaft, fuel pump, or both. It could also send metal particles into your cylinder head which can cause damage to moving parts. Without replacement, it is common for followers to have holes worn through them.

    Replacing this follower as a form of preventative maintenance can save you from spending even more money and time replacing your fuel pump or camshaft from damage caused by a worn follower.

    Regular Price: $142.00

    Special Price $129.00

  2. Genuine Volkswagen VW USB and AUX for MIB 2 Radio

    Genuine Volkswagen USB AUX Switch for CarPlay & Auto Android Adapter Plug Socket

    This USB/AUX Adapter is designed for MIB 2 & MIB 2.5 Radio Control Units. This adapter is required for Pre-2016 Vehicles to allow CarPlay and Auto Android connectivity.

    Compatible with:

  3. Genuine VW/Audi OEM Canbus Gateway Upgrade

    Most commonly used to eliminate battery drain issues in Pre-2009 model Volkswagen cars when upgrading the radio to a later model such as the RNS510, RCD510 ,RCD330, RCD340 etc.

    The Canbus Gateway Module, will require coding using software such as VCDS or OBDII. 

    Installation instructions: https://www.my-gti.com/2296/can-bus-gateway-removing-installing-and-upgrading-volkswagen-golf

    $139.00
  4. Volkswagen Genuine Flip Badge Static Rear View AV Composite Reverse Camera - Fits VW MK5, MK6, Polo 6R, Polo 6C, Passat B7 & B8, T-Roc Volkswagen Genuine Flip Badge Static Rear View AV Composite Reverse Camera - Fits VW MK5, MK6, Polo 6R, Polo 6C, Passat B7 & B8, T-Roc
    Sale

    Volkswagen Genuine Flip Badge Static Rear View AV Composite Reverse Camera - Fits VW MK5, MK6, Polo 6R, Polo 6C, Passat B7 & B8, T-Roc

    Do it right the first time and only purchase a Genuine VW reverse camera. 
    This flip badge reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the RCD330/RCD340 -6RD035187B.

    Volkswagen Original Rear Emblem Camera KIT Composite(AV) Output Compatible with: 

    • VW Golf MK5
    • VW Golf MK6
    • VW Polo 6R / 6C (Bracket Required)
    • VW Passat B7/B8 (Sedan Only)
    • VW T-Roc

    See behind your car with a camera in your boot.

    A camera at the back of your car shows you what's behind to make reversing safer and easier.

    Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot.

    The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking.

    Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer.


    Compatible with head unit :
    VW Genuine RCD330 / RCD340 - 6RD035187B
    VW Genuine Discover Media
    VW Genuine Discover Pro
    Radiosystem: Composition Media
    Not compatible with Composition Media radios with the following part numbers :
    5G0035820
    5G0035819
    5G0035812

    Please note: VAS / OBD11 / VCDS Coding is required after installation. 
    Professional Installation is recommended, we do not provide installation assistance for this product. 

    FAQ's
    Does this flip badge camera work with the RCD330?
    Yes! It certainly does, no delay timer or AV converter box required. 
    What is included in this kit?
    The Genuine VW Flip Badge Reverse Camera & Wiring Harness
    Will this camera work with an RCD510/RNS510 or RNS315 Radio?
    No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below)
    26-pin-rgb-connector

    Regular Price: $499.00

    Special Price $329.00

  5. Genuine Volkswagen Reverse Handle Camera for Passat B6 & B7 Wagon, MK6 Golf Wagon, Jetta and Tiguan 5N Genuine Volkswagen Reverse Handle Camera for Passat B6 & B7 Wagon, MK6 Golf Wagon, Jetta and Tiguan 5N
    Sale

    Genuine Volkswagen Reverse Handle Camera for Passat B6 & B7 Wagon, MK6 Golf Wagon, Jetta and Tiguan 5N

    Do it right the first time and only purchase a Genuine VW reverse camera. This boot handle reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the RCD330/RCD340 -6RD035187B. Volkswagen Original Boot Lid Camera KIT Composite(AV) Output Compatible with: * VW Golf MK6 Wagon (2010-2013) * VW Tiguan 5N (2007 - 2014) * VW Passat B6 & B7 (Wagon) (2005-2014) * VW Jetta 1K & 5C (2005-2012) See behind your car with a camera in your boot lid. A camera at the back of your car shows you what's behind to make reversing safer and easier. Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot. The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking. Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer. Compatible with head unit : VW Genuine RCD330 / RCD340 - 6RD035187B VW Genuine Discover Media VW Genuine Discover Pro Radiosystem: Composition Media Not compatible with Composition Media radios with the following part numbers : 5G0035820 5G0035819 5G0035812 Please note: VAS / OBD11 / VCDS Coding is required after installation. Professional Installation is recommended, we do not provide installation assistance for this product.  FAQ's Does this camera work with the RCD330? Yes! It certainly does, no delay timer or AV converter box required.  What is included in this kit? The Genuine VW Handle Reverse Camera & Wiring Harness Will this camera work with an RCD510/RNS510 or RNS315 Radio? No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below) 

    Regular Price: $269.00

    Special Price $198.00

  6. Genuine VW Composition Media Radio - Apple CarPlay & Android Auto - Golf MK6, Scirocco R, Amarok, Caddy, Jetta Genuine VW Composition Media Radio - Apple CarPlay & Android Auto - Golf MK6, Scirocco R, Amarok, Caddy, Jetta
    Sale

    Genuine VW Composition Media Radio - Apple CarPlay & Android Auto - Golf MK6, Scirocco R, Amarok, Caddy, Jetta

    The Volkswagen Composition Media PQ system combines the best  multimedia entertainment in an easy to use touch screen unit.

    The built-in proximity sensors ensures maximum use of the 6.5” screen by hiding the function buttons not being used and only displaying them when the user moves their hand close to the screen.

    The system offers hands-free calling from mobile phones via Bluetooth as well as Audio Streaming (A2DP) of tracks wirelessly.

    With a built-in FM/AM tuner, Disc drive (CD & MP3), SD card reader and (optional) USB/iPod ports, there is no shortage of entertainment sources for a more pleasurable drive.

    Voice Activation allows hands-free use of the system by simply speaking commands and therefore ensuring safer driving.

    App-Connect is a major highlight of the Composition Media PQ System. Volkswagen is one of the first manufacturers to offer a system that is compatible with the most common smartphone integration interfaces: Apple Car-Play & Android Auto.

    This ensures integration of virtually any type of smartphone.                                                         

    Once connected, the touchscreen layout will resemble the screen of your device making it easier to use.

    - Component Protection Unlocked

    - Voice Control Activated

    - Support for Apple CarPlay and Android Auto

    - SD Card Slot

    - Quadlock Adapter for older model cars, including USB Port & Wiring Harness

    Supported PQ Platform Vehicles:

    • Amarok
    • Beetle
    • Caddy
    • Golf
    • Jetta
    • Scirocco
    • Tiguan
    • Transporter
    • Multivan

    Features & Specifications:

    • 6.5″ touchscreen colour display with proximity sensor
    • CD drive MP3/WMA
    • Music playback from MP3, WMA files with title display from SD
    • USB, SD (Aux and USB require optional connection cable)
    • FM and AM radio reception
    • 4 x 20 watt output (front and rear speakers)
    • Bluetooth connection for phone and media (HFP, A2DP)
    • App-Connect (Apple CarPlay & Android Auto)
    • Voice Control

    Package Contents:

    • Genuine VW Composition Media Unit
    • PQ Quadlock Harness Adapter 
    • Microphone with Harness
    • CarPlay USB/AUX Port with Wiring Harness
    • Antenna Adapter & Harness

    Regular Price: $1,399.00

    Special Price $1,099.00

  7. IE Audi S4/S5 B8 & B8.5 DSG Tune (2010-2016 S-Tronic Transmission) IE Audi S4/S5 B8 & B8.5 DSG Tune (2010-2016 S-Tronic Transmission)
    Sale

    IE Audi S4/S5 B8 & B8.5 DSG Tune (2010-2016 S-Tronic Transmission)

    SHIFT FASTER, DRIVE FASTER The IE DSG Tune for your Audi B8/B8.5 S4/S5 3.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 3.0T into a fully rounded performance monster. LEADING FEATURES Lightning fast gear shifts Higher shift points of 7200 RPM Multiple launch RPMs: 3400, 3600, 3800, 4000 Drive shift mapping entirely reworked with an enthusiast in mind Flashed directly through OBD-II Port (No TCU removal required) Works flawlessly with all IE ECU Tunes Unlimited launches (factory defaults to 200) Increased clutch pressure on tap for higher torque without slip Temperature protection remains for safety Gear hunting reduced Gearbox “Torque Limiters” removed WHAT DOES A DSG TRANSMISSION TUNE DO? IE’s Audi S4 (DL501 S-Tronic) DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features and upgrades are included at one low cost. A great deal of sportiness is added to the tune while maintaining factory smoothness and driveability that you love about the S4. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve dramatically from a larger useable powerband provided by the higher shift points. REQUIRED FOR SELECT ECU TUNES Required for S4 & S5 Stage 2 dual pulley files, your new transmission tune will no longer lug the engine in drive mode or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes. ONE TUNE FOR ALL STAGES IE’s DSG tunes are all-inclusive without any expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset for any level of hardware or ECU Tune Stage, one cost and you are covered for all and any future upgrades from Stage 1 to Stage 2 billion. USER ADJUSTABLE LAUNCH CONTROL The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup! Available Launch Control RPMs: 3400 RPM 3600 RPM 3800 RPM 4000 RPM *Some early model B8 DSG TCUs cannot have launch control added to them, as well as some replacement Mechatronics units. Non compatible TCU codes include, but may not be limited to 8K1927156AC and 8K1927156AD. You can use your IE Powerlink tool to check your TCU code. Other DSG tune features will function normally. IE DSG TUNE TECHNICAL FEATURES HIGHER SHIFT POINTS Utilize the whole powerband of your supercharged 3.0T engine without the DSG interfering and shifting early. DRIVE MAPPING REWORKED The B8 and B8.5 S4 is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode. INCREASED CLUTCH PRESSURE Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive. FLASHED THROUGH OBD-II PORT There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes. TAKE-OFF LAG REDUCED The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop. MULTIPLE LAUNCH RPMS The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup! FLAWLESS OPERATION WITH IE ECU TUNES The IE DSG Tune and ECU Tunes were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 3.0T engine and transmission. Perfect for all IE Tunes from Stage 1 to dual pulley and throttle upgrades. VEHICLE FITMENT Audi - S4 2008-2016 (B8 & B8.5) 3.0T supercharged engines* Audi - S5 Coupe 2013-2016 (B8.5) 3.0T* Audi - S5 Cabriolet 2009-2016 (B8-B8.5) 3.0T* *IE DSG tunes are available only for vehicles equipped with Audi's 7-speed S-Tronic transmissions. Does not function with manual 6-speed transmission cars.

    Regular Price: $1,199.00

    Special Price $1,079.00

  8. IE Audi 3.0T Cold Air Intake Carbon Fiber Lid Only | Fits B8/B8.5 S4 & B8.5 S5, Q5 & SQ5 8R

    UPGRADE YOUR IE INTAKE!

    Already have an IE 3.0T intake? This highly stylized gloss carbon fiber lid is an optional upgrade that will completely transform your engine bay with a high-end performance finish. Specially designed to not only fit the IE CAI, but to also conform to the factory engine bay for a 100% perfect fit.

    $459.00
  9. IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5

    LEADING INTAKE FEATURES

    • Increased airflow - Get the most out of your upgrades
    • High-flow velocity stack - True performance design
    • Sealed heatshield - Separates cold air from engine bay heat
    • Perfect fitment - No modifications required to bolt-on
    • Amazing sound - Releases awesome turbo and engine noise
    • Looks great - Black powder coat, tight clearances, clean angles 

    AUDI B8 A4 & A5 COLD AIR INTAKE

    You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.

    EASY INSTALLATION

    Installation is quick and easy to install with basic tools. The process should take under an hour for most enthusiasts. CLICK HERE to view and download the IE B8/B8.5 A4/A5 Cold Air Intake Install Guide.

    VEHICLE FITMENT

    • Audi - A4 2009-2015 (B8-B8.5) 2.0T
    • Audi - A4 Allroad 2009-2015 (B8-B8.5) 2.0T
    • Audi - A5 2009-2015 (B8-B8.5) 2.0T
    $719.00
  10. IE Audi 3.0T Cold Air Intake | Fits 8R SQ5 & Q5

    UNIQUELY ENGINEERED

    This is not another mass produced "filter on a stick". IE's cold air intake has been specifically engineered and developed using professional racing design aspects and specialized computational flow dynamic software. The result is a true Motorsport intake system that sounds and performs for the track with a sophisticated and classy design.

    EASY POWER

    The ram air design, built-in velocity stack, and our massive 5-inch filter inlet help deliver the most HP possible from a cold intake system. Expect peak gains of 15-20+HP/TQ on tuned engines.

    DESIGN FEATURES

    INCREASED AIR FLOW

    Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE's intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds AWESOME too!

    HIGH-FLOW VELOCITY STACK

    Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.

    PRECISION FIT

    This Intake fits Audi 8R SQ5 & Q5 3.0T V6 Supercharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle-free fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.

    QUALITY COMPONENTS

    IE uses a multi-piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay further protecting against power robbing heat off the exhaust and supercharger.

    VEHICLE FITMENT GUIDE:

    MAKE MODEL YEAR ENGINE

    AUDI

    SQ5

    2014-2017 8R

    3.0T Supercharged

    AUDI

    Q5

    2009-2017 8R

    3.0T Supercharged

Set Descending Direction

   

Items 21 to 30 of 62 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5