Vehicles

P3 V3 Gauge Features

• Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? 
  
• OEM Integration - installs the dash and cluster trim for a sleek install
• Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
• Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)

• Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
• Coolant temperature
• Engine oil temperature (GTI and Golf R)
• Air/Fuel ratio (can be read in AFR or Lambda)
• Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
• Intake air temperature
• Throttle angle
• Ignition timing
• Engine RPM
• Exhaust gas temperature
• Battery voltage
• Programmable shift light
• Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
• Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
• Acceleration timers (0-60mph/0-100mph/60-130mph)
• Braking timers (60-0mph/100-0mph)

Optional Add-Ons

• P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
• Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
• P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
• Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
• OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

You asked, we answered.

The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.

No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Electronics in a harsh climate? We've got that covered too.

We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.

DESCRIPTION

ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE

To celebrate the upcoming release of the latest Flow Designs kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!

To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!

If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.

Suits MK8 Golf R models

INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:

Our adjustable front lip splitter extensions will bolt directly onto our MK8 Golf R front lip splitter thanks to the Pre-Pressed threaded brass fittings installed into the splitter. adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm. Flow branded black stainless hardware will be provided to ensure perfect fitment and adjustability.

Our MK8 Golf R body kit range shares the same strength, durability and technology as our popular Volkswagen Golf, i30N and Ford Focus RS line up which is trusted by many enthusiasts. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

Front lip splitter & front winglets sold separately.

KIT INCLUDES:

MK8 Golf R adjustable front lip splitter extensions
2 Flow Designs stickers
Fitting kit with black stainless hardware

MATERIAL & FINISH:

4.5mm thick ABS plastic
Scratch resistant textured ABS plastic

Details

Our adjustable front lip splitter extensions will bolt directly onto our MK7 Golf GTI front lip splitter thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

The Volkswagen MK7 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

MK7 Golf GTI front lip splitter and MK7 Golf GTI front winglets sold separately. 

---

VOLKSWAGEN MK7 GOLF GTI FRONT LIP SPLITTER EXTENSIONS KIT INCLUDES:

• MK7 Golf GTI adjustable front extensions (pair)
• x2 Flow Designs stickers
• Fitting kit

VOLKSWAGEN MK7 GOLF GTI FRONT LIP SPLITTER EXTENSIONS MATERIAL & FINISH:

• 4.5mm thick textured ABS 
• Scratch resistant textured ABS plastic

DETAILS

Our adjustable front lip splitter winglets will bolt directly onto our MK7 Golf GTI front lip splitter thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

The Volkswagen MK7 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

MK7 Golf GTI front lip splitter and MK7 Golf GTI front extensions sold separately. 

---

VOLKSWAGEN MK7 GOLF GTI FRONT SPLITTER WINGLETS KIT INCLUDES:

• Volkswagen MK7 Golf GTI adjustable front splitter winglets (pair)
• x2 Flow Designs stickers
• Fitting kit

VOLKSWAGEN MK7 GOLF GTI FRONT SPLITTER WINGLETS MATERIAL & FINISH:

• 4.5mm thick textured ABS 
• Scratch resistant textured ABS plastic

DETAILS

Our adjustable side skirt splitter winglets will bolt directly onto our MK7 Golf GTI side skirt splitters thanks to the pre-pressed in threaded brass fittings on our side skirt splitters. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

The Volkswagen MK7 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

MK7 Golf GTI side skirt splitters sold separately. 

---

VOLKSWAGEN MK7 GOLF GTI SIDE SKIRT SPLITTER WINGLETS KIT INCLUDES:

• Volkswagen MK7 Golf GTI adjustable side skirt splitter winglets (pair)
• x2 Flow Designs stickers
• Fitting kit

VOLKSWAGEN MK7 GOLF GTI SIDE SKIRT SPLITTER WINGLETS MATERIAL & FINISH:

• 4.5mm thick textured ABS 
• Scratch resistant textured ABS plastic

Volkswagen MK7 Golf GTI Adjustable Rear Spat Winglets (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf GTI! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. VW MK7 Golf GTI Rear Winglets are only compatible with Flow Designs MK7 GTI rear spats only which are designed to be an adjustable direct bolt-on accessory. Adjustable anywhere between 0mm - 20mm on each side increasing the overall width up to 40mm. Rear Spats sold separately. Kit Includes: Adjustable Rear Spat Winglets (Pair) 2 Flow Designs Stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

Volkswagen MK7 Golf GTI Front Splitter Reinforcement Bar Details: The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf GTI! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. Front Splitter sold separately. Kit Includes: Bumper reinforcement bracket 2 Flow Designs stickers Fitting kit CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.

DETAILS

The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf R! With front & side splitters & rear valance with Diffuser Fins, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Installation is simple, and to make things even easier, we have pre-drilled all our parts so there is no guesswork for you. We've implemented visual prompts in our design so you know exactly where the splitter is meant to line up with the OEM side skirt.

The pre-installed brass thread is hidden from sight and will accept our adjustable side winglets which are sold separately as a bolt-on accessory to suit our side splitter. 

By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept MK7.5 Golf R adjustable side winglets (sold separately).

---

VOLKSWAGEN MK7.5 GOLF R SIDE SKIRT SPLITTER KIT INCLUDES:

• Side skirt splitters (pair) with pre-pressed threaded brass inserts
• x2 Flow Designs Stickers
• Fitting kit

VOLKSWAGEN MK7.5 GOLF R SIDE SKIRT SPLITTER MATERIAL & FINISH:

• Side splitter: 10mm thick polyethylene composite
• Hand polished satin black
• Bevelled edges
• CNC engraved logo and features

DETAILS

The Flow Designs splitter set is the best exterior mod for your Volkswagen MK7.5 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our goal was to create a kit that is discreet and stable without the use of any exposed hardware, it also must be easy to assemble, install and be flat-packable. 

Flow-Lock interlocking integral assembly system allows assembly of the diffuser fins without the need for tools or fasteners. With a simple "push and click" action, the kit is assembled and ready for installation.

No ugly L-brackets, no additional exposed hardware and no double-sided tape.
The final installation is a matter of bolts and nuts, it is also possible to install on the ground. A lot of research and development has been put in to ensure you have a strong and reliable product that is easy to install also pleasing the eye.

The rear valance and diffuser fins will clear the Volkswagen MK7.5 Golf R dual exhaust tips and rear bumper removal is not necessary for installation of the diffuser. 10 year warranty applies for the rear valance (excludes ABS fins).

Rear spats are sold separately.

---

VOLKSWAGEN MK7.5 GOLF R REAR DIFFUSER KIT INCLUDES:

• Volkswagen MK7.5 Golf R rear diffuser (rear valance and Flow-Lock diffuser fins)
• x2 Flow Designs stickers
• Fitting kit

VOLKSWAGEN MK7.5 GOLF R REAR DIFFUSER MATERIAL & FINISH:

• Valance: 10mm thick polyethylene composite, bevelled edges
• Flow-Lock diffuser fins: 4.5mm thick textured ABS 
• Valance: Hand polished satin black
• Flow-Lock diffuser fins: scratch resistant textured ABS plastic
• CNC engraved logo and features