You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Audi - CTS Turbo - H&R Springs - P3 Cars - VW Central - INA

Set Descending Direction

   

Items 11 to 20 of 33 total

  1. 1
  2. 2
  3. 3
  4. 4
  1. CTS TURBO B8.5 S4, S5, Q5, SQ5; C7.5 A6, A7, Q7 3.0T SUPERCHARGER PULLEY – BOLT ON STYLE

    DESCRIPTION

    CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7

    THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.

    CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.

    NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
    Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.

    Most Stage 2+ software tunes are compatible with this kit.

    Product Details

    • Made in house at CTS Turbo in Canada
    • Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
    • OEM-spec honing and tolerances
    • Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
    • Nitride coated for long-lasting OEM looking finish
    • Includes belt and bolts required for install
    • Stock Size: 63.25mm, CTS Size: 57.3mm

    Fitment:

    • 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
    • 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
    • Late Audi Q7 with 3.0T SUPERCHARGED engine
    $249.00
  2. CTS TURBO STAGE 3 FUEL PUMP UPGRADE KIT FOR VW/AUDI MQB MODELS

    DESCRIPTION

    We are proud to release the new our CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5.  As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump).  While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system.  CTS has developed a fully integrated fueling system, which utilizes a Walbro 450LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 500HP.  If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.

    NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.

    Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.

    Product Details:

    – Genuine Walbro High Output in-tank 450LPH E85 compatible Fuel Pump
    – Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
    – CTS CNC machined/black hard anodized pump adapter
    – CTS CNC machined/black fuel pump spacers
    – CTS CNC machined/black fuel pump venturi standoff
    – Viton O-ring
    – Nylon wire crimps
    – Drill bits
    – Stainless steel fasteners

    Fitment:

    • 2015 – current VW Golf (incl Sportwagen and AllTrack)
    • 2015 – current VW GTI (incl Rabbit)
    • 2015 – current VW Golf R
    • 2015 – current Audi A3
    • 2015 – current Audi S3
    • 2017 – current Audi A4/A5/AllRoad
    $629.00
  3. CTS TURBO STAGE 3.5 HELLCAT FUEL PUMP UPGRADE KIT FOR VW/AUDI MQB MODELS CTS TURBO STAGE 3.5 HELLCAT FUEL PUMP UPGRADE KIT FOR VW/AUDI MQB MODELS
    Sale

    CTS TURBO STAGE 3.5 HELLCAT FUEL PUMP UPGRADE KIT FOR VW/AUDI MQB MODELS

    Description

    We are proud to release the new our CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5.  As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump).  While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system.  CTS has developed a fully integrated fueling system, which utilizes a Walbro 525LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 600HP.  If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.

    NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.

    Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.

    Product Details:

    – Genuine Walbro High Output in-tank 525LPH HELLCAT E85 compatible Fuel Pump
    – Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
    – CTS CNC machined/black hard anodized pump adapter
    – CTS CNC machined/black fuel pump spacers
    – CTS CNC machined/black fuel pump venturi standoff
    – Viton O-ring
    – Nylon wire crimps
    – Drill bits
    – Stainless steel fasteners

     

    Fitment:

    • 2015 – current VW Golf (incl Sportwagen and AllTrack)
    • 2015 – current VW GTI (incl Rabbit)
    • 2015 – current VW Golf R
    • 2015 – current Audi A3
    • 2015 – current Audi S3
    • 2017 – current Audi A4/A5/AllRoad

    The following VW fuel pumps are compatible: 5Q0919051BK, 5Q0919051BM

    Regular Price: $699.00

    Special Price $679.00

  4. Audi R8 Ignition Coil Pack Set of 4  Audi R8 Ignition Coil Pack Set of 4
    Sale

    Audi R8 Ignition Coil Pack Set of 4

    Experiencing Misfires on your car? Don't go OEM again!
    Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles

    Buy a set of 4 Now!

    Regular Price: $189.00

    Special Price $179.00

  5. Set of 5 Ignition Coil Pack for Audi RS3 8V

    Experiencing Misfires on your car? Don't go OEM again!
    Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles

    Buy a set of 4 Now!

    $240.00
  6. INA - FSI 2.0T Fuel Pump Cam Follower - OEM - 06D109309C INA - FSI 2.0T Fuel Pump Cam Follower - OEM - 06D109309C
    Sale

    INA - FSI 2.0T Fuel Pump Cam Follower - OEM - 06D109309C

    VW has encountered a problem with the FSI camshaft and cam follower that could lead to damage to your engine's cylinder head.

    This small part can play quite a big role in your engine's well-being. It conveys the movement of your camshaft into power for the high pressure fuel pump by riding directly on the camshaft lobe.

     If it becomes worn to the point of breaking it can cause permanent damage to the camshaft, fuel pump, or both. It could also send metal particles into your cylinder head which can cause damage to moving parts. Without replacement, it is common for followers to have holes worn through them.

    Replacing this follower as a form of preventative maintenance can save you from spending even more money and time replacing your fuel pump or camshaft from damage caused by a worn follower.

    Regular Price: $64.00

    Special Price $60.00

  7. The CTS VW Golf MK5 & MK6 2.0T Direct Fit FMIC The CTS VW Golf MK5 & MK6 2.0T Direct Fit FMIC
    Sale

    The CTS VW Golf MK5 & MK6 2.0T Direct Fit FMIC

    Efficient bar and plate construction - Direct bolt-in installation - 4-ply silicon hoses and billet adapter to turbo outlet pipe - High quality stainless steel clamps - Low pressure drop - Maintains factory mounting points - No trimming of bumper or crash supports - Rated for power levels in excess of 600HP - Core dimensions: 23.00 Length x 2.00" Tall x 16.5" Height - Cast aluminium end tanks with mounting points that are CAST into the end tank, NOT welded like inferior intercoolers

    Regular Price: $1,499.00

    Special Price $1,349.00

  8. CTS Turbo Golf R Turbo Outlet Pipe

    The CTS Turbo Golf R Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle.
    $369.00
  9. CTS Shifter Bracket Bushing

    Stop missing shifts and your friends will stop laughing at you.

    Eliminate free-play and slop in your factory shifter bracket by replacing soft factory rubber bushings.

    Keep your shifts crisp and smooth; and stay ahead of the pack!

    Kit includes:

    3 x shifter bracket bushings (upper and lower halfs)

    This part fits the following transmissions:

    MK3: 02A ONLY

    MK4: 02J, 02M

    MK5: 02Q

    MK6: 02Q

    MK7: 6MT

    $39.95
  10. CTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO TURBO OUTLET PIPE CTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO TURBO OUTLET PIPE
    Sale

    CTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO TURBO OUTLET PIPE

    CTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO TURBO OUTLET PIPE

    Regular Price: $329.00

    Special Price $289.00

Set Descending Direction

   

Items 11 to 20 of 33 total

  1. 1
  2. 2
  3. 3
  4. 4