Audi - CTS Turbo - OSIR - Turbosmart - Flow Designs - Autotech
DESCRIPTION
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler.
Product Details:
60mm aluminum piping with CTS logo
5-ply silicon coupler
Factory mounting points are used for perfect fitment
Durable black powdercoat finish
For 7-speed DSG/S-tronic transmissions only
Compatible with factory and upgraded turbos
Compatible with factory and upgraded intakes
Compatible with factory and upgraded intercoolers
Parts Included:
Upper turbo outlet silicon
Lower turbo outlet pipe
2 clamps
Installation hardware
Fitment:
2018+ VW Golf R DSG 7-speed
2019+ VW GLI DSG 7-speed
2019+ VW GTI DSG 7-speed
2018+ Audi A3 S-Tronic 7-speed
2018+ Audi S3 S-Tronic 7-speed
2018+ Audi TT, TT-S S-Tronic 7-speed
NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275
At CTS Turbo we are proud to announce our new air intake system for the MK5 R32. The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system. Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing. Our high quality silicones fit seamlessly with the OEM MAF flange allowing for smooth entry of cold air into the the engine providing peak power gains ranging from 9-15HP. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.
Sale
CTS Turbo is proud to announce our high flow turbo inlet for B9 Audi S4/S5/SQ5
The biggest issue with the restrictive factory inlet is apparent when you start to increase the power. Our engineers designed the turbo inlet to be as large as possible; yet still fit perfectly. This was accomplished using the latest in 3D scanning and rapid prototyping technology.
The larger inlet will provide increased flow to the turbo and make sure the engine has all the air that it needs to operate at maximum capacity!
Features:
- High flow cast aluminum turbo inlet pipe
- Precision machined fitment for the factory turbo
- Factory-style PCV connections
- Developed, tested and machined in-house
- Includes new o-ring and allen head bolts for easy install
Fitment:
- 2018-on Audi B9 S4
- 2018-ont Audi B9 S5
- 2018-on Audi B9 SQ5
Regular Price:
$229.00
Special Price
$169.00
The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold.
The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.
Description
DESCRIPTION
CTS Turbo is proud to release our 1.8T and 2.0T Atmospheric BOV KIT for EA888.3 equipped vehicles. The CTS Turbo Atmospheric BOV KIT (EA888.3) is made of billet construction and completely serviceable. Our kit is designed to work with all of the factory electronics, will not cause any check engine lights and is plug and play with no wiring extensions required. The CTS Turbo Atmospheric BOV KIT (EA888.3) replaces the factory plastic unit which has been prone to failure from torn diaphragms, cracked plastic, and electrical malfunctions. Our piston design ensures long life, easy installation, complete serviceability, great sound and great value. This valve is quite compact being slightly shorter than the stock unit and fits nicely even in the tight engine bays of today’s VAG cars.
Fitment:
MK7 Golf R (EA888 Gen 3)
MK7 Golf GTI (EA888 Gen 3)
MK7 Golf 1.8 TSI (EA888 Gen 3)
MKIII Audi S3 (EA888 Gen 3)
MKIII Audi A3 (EA888 Gen 3)
MK2 Audi TT (EA888 Gen 3)
Skoda Octavia VRS (EA888 Gen 3)
MKVI+ Jetta 1.8T and 2.0T (EA888 Gen 3)
MKII Beetle (EA888 Gen 3)
Passat B7 (EA888 Gen 3)
Product Features:
T6061 billet aluminum construction
Black anodized stealth finish
Fully compatible with OE electronics
Fully serviceable piston design
No additional wiring required
Substantial reliability improvement over OE
Compact design fits into tight spots easily
Description
DESCRIPTION
At CTS Turbo we are proud to announce our new throttle pipe for the 8V.2 RS3/8S TTRS 2.5T EVO. The OEM charge piping leaves something to be desired with inefficient bends not optimized for performance. The CTS Turbo throttle pipe increases the entire inside diameter to 2.5″ allowing for increased flow and greater performance. The integrated water methanol bungs allow for simple and straightforward installation of kits from Snow Performance. All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, power and torque throughout the entire power band and an aggressive race inspired sound.
Product Details:
– For 8V.2 RS3/ 8S TTRS 2.5T EVO
– CNC bent aluminum piping
– CNC machined MAP flange
– Integrated water methanol bungs with plugs
– Robust black powder coating
– CNC machined mounting flange
– Coveted CTS Turbo logo
Sale
CTS Turbo Blankets isolate the heat produced by your IHI IS12/IS20/IS38 turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower. In keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power.
This turbo blanket fits all IHI turbos found on MQB platform cars
IS12 Turbos found on MK7 1.8TSI Golf and 8V Audi A3 FWD
IS20 Turbos found on MK7 GTI and 8V Audi A3 Quattro
IS38 Turbos found on the MK7 Golf R and 8V Audi S3
CTS Turbo Blanket Heat Tolerance:
Interior Surface:
Max Temperature Rating: 2100 Deg F
Continuous Use Limit: 1800 Deg F
Exterior Surface:
Direct Contact Limit: 800 Deg F
Radiant Heat Limit: 1200 Deg F
Regular Price:
$199.00
Special Price
$189.00
DESCRIPTION
CTS Turbo is happy to release our high flow turbo outlet pipe kit for MQB vehicles equipped with BOSS V3 kits or hybrid turbochargers. This part is perfect to compliment the 2.5″ turbo outlet on the BOSS V3 kit, making the installation seamless.
The CTS Turbo 2.5″ high flow turbo outlet pipe kit replaces all the factory charge piping between the turbocharger compressor housing and intercooler.
Product Details:
- 2.5″ turbo outlet fitting
- 2.5″ Aluminum piping
- OEM style pipe bracket
- High quality tig welds
- Durable powdercoat finish
- Fits all MQB models with BOSS V3 kit or hybrid turbos.
Hardware Included:
- 2.5″ Silicone coupler
- Lower turbo outlet pipe
- 2.5″ turbo outlet fitting
- Hose clamps
- Installation hardware
Fitment:
- VW Golf/AllTrack/Sportwagen 1.8TSI (2015 – 2020)
- VW GTI (2015 – 2021)
- VW Golf R (2015 – 2019)
- Audi A3 (2015 – 2020)
- Audi S3 (2015 – 2020)
- Audi TT/TT-S (2015-2020)
- VW Jetta GLI (2019 – 2020)
Vehicle Fitment
Model
Make | Model | Year | Generation |
AUDI |
A3 |
2015 - 2020 |
8V |
AUDI |
S3 |
2015 - 2020 |
8V |
AUDI |
TT |
2016 - 2020 |
8S |
VW |
GOLF |
2015 - 2020 |
MK7/7.5 |
VW |
GOLF R |
2015 - 2019 |
MK7/7.5 |
VW |
GTI |
2015 - 2020 |
MK7/7.5 |
Suits Pre-facelift (PFL) Sportback only
Details:
The Flow Designs splitter set for the Audi RS3 8V (PFL Sportback) include front & side splitters with a pair of rear spats. These are the perfect addition to your RS3 hatch, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Splitters (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Suits Pre-facelift (PFL) Sportback only
Details:
The Flow Designs splitter set for the Audi RS3 8V (PFL Sportback) include front & side splitters with a pair of rear spats. These are the perfect addition to your RS3 hatch, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Spats (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.