Audi - CTS Turbo - H&R Springs - Integrated Engineering - XFORCE - P3 Cars - Whiteline - Autotech

The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold. The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.

Description

DESCRIPTION
CTS Turbo is proud to release our 1.8T and 2.0T Atmospheric BOV KIT for EA888.3 equipped vehicles. The CTS Turbo Atmospheric BOV KIT (EA888.3) is made of billet construction and completely serviceable. Our kit is designed to work with all of the factory electronics, will not cause any check engine lights and is plug and play with no wiring extensions required. The CTS Turbo Atmospheric BOV KIT (EA888.3) replaces the factory plastic unit which has been prone to failure from torn diaphragms, cracked plastic, and electrical malfunctions. Our piston design ensures long life, easy installation, complete serviceability, great sound and great value. This valve is quite compact being slightly shorter than the stock unit and fits nicely even in the tight engine bays of today’s VAG cars.

Fitment:

MK7 Golf R (EA888 Gen 3)
MK7 Golf GTI (EA888 Gen 3)
MK7 Golf 1.8 TSI (EA888 Gen 3)
MKIII Audi S3 (EA888 Gen 3)
MKIII Audi A3 (EA888 Gen 3)
MK2 Audi TT (EA888 Gen 3)
Skoda Octavia VRS (EA888 Gen 3)
MKVI+ Jetta 1.8T and 2.0T (EA888 Gen 3)
MKII Beetle (EA888 Gen 3)
Passat B7 (EA888 Gen 3)

Product Features:
T6061 billet aluminum construction
Black anodized stealth finish
Fully compatible with OE electronics
Fully serviceable piston design
No additional wiring required
Substantial reliability improvement over OE
Compact design fits into tight spots easily

Description

DESCRIPTION

At CTS Turbo we are proud to announce our new throttle pipe for the 8V.2 RS3/8S TTRS 2.5T EVO.  The OEM charge piping leaves something to be desired with inefficient bends not optimized for performance.  The CTS Turbo throttle pipe increases the entire inside diameter to 2.5″ allowing for increased flow and greater performance.  The integrated water methanol bungs allow for simple and straightforward installation of kits from Snow Performance.  All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, power and torque throughout the entire power band and an aggressive race inspired sound.
Product Details:

– For 8V.2 RS3/ 8S TTRS 2.5T EVO

Product Desciption:

We now offer a MK3 Audi TTRS and 8V Facelift Audi RS3 Catalytic Converter Midpipe kit.

Product Details:

– Hand Crafted from 3″ T304 Stainless Steel

– Necessary installation hardware included (gasket set included)

– CNC water jet cut flanges

– CNC mandrel bent stainless steel piping

– Polished stainless steel exhaust tubing

– Power gains from 7+ whp 10+ ftlbs torque

– Will not cause CEL (check engine light)

CTS Turbo Blankets isolate the heat produced by your IHI IS12/IS20/IS38 turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower.  In keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power.

This turbo blanket fits all IHI turbos found on MQB platform cars

IS12 Turbos found on MK7 1.8TSI Golf and 8V Audi A3 FWD

IS20 Turbos found on MK7 GTI and 8V Audi A3 Quattro

IS38 Turbos found on the MK7 Golf R and 8V Audi S3

CTS Turbo Blanket Heat Tolerance:

Interior Surface:
Max Temperature Rating: 2100 Deg F
Continuous Use Limit: 1800 Deg F

Exterior Surface:
Direct Contact Limit: 800 Deg F
Radiant Heat Limit: 1200 Deg F

Introducing the NEW XFORCE Downpipe offering to suit Audi PFL RS3 8V 09/2015-12/2016. 

Experience more performance from your Audi RS3 by bolting on our XFORCE Performance Exhaust Turbo Downpipe.

The turbo downpipe stainless steel pipe kit which is equipped with a high-flow cat to achieve maximum flow. Your Audi RS3 will come alive and demand attention!

Over 20 years of exhaust development and technical expertise have gone into creating the ultimate bolt-on performance downpipes, providing power increases throughout the rev range.

Dump-Pipe & Cat Kit

• Features

  • Stainless Steel
  • Non Polished 3.5″ – 3″ pipe work
  • Stainless Steel Flex Bellow
  • 200 Cell Metallic High Flow Cat
  • Additional Tuning pipe
  • 3″ to Twin OEM size adaptor pipe
  • Fitting kit supplied

  Part No:	ESRS315KITB
  Vehicle Model:	RS3
  Material:	304 Stainless Steel

  
  COMPATIBLE

LEADING FEATURES

• Required for IE TrueFlex MQB tunes
• Allows for instant adjustments from 91 pump to full E85
• Harness for VW MK7 & Audi 8V EA888.3 engines
• Sends sensor data in real-time to IE ECU calibrations
• Includes everything needed to install

OVERVIEW

This plug and play harness kit is required for IE TrueFlex ECU Tunes for VW and Audi MQB Gen 3 engines. This includes everything necessary for the flex-fuel sensor to send real-time data from your fuel system to the ECU and adjust for any content mix from 91 pump to full E85 automatically.

Kit includes:

• (1x) IE TrueFlex Wiring Harness
• (1x) 2 amp Fuse
• (1x) Ethanol Sensor
• (2x) Ethanol Sensor Quick Connect Couplers
• (2x) Hose Clamps

INSTALLATION

This harness kit is fully assembled to proper lengths and includes everything needed to install in a clean and factory-like install. Disconnecting and cutting of factory soft fuel lines is required and should be completed with great care or by a professional.

TrueFlex is currently available for 2015-2018 MK7 GTI & A3 2.0T W/IS38. Stage 1 & 2, Golf R/S3, and 2019+ model years are coming soon!

CTS Turbo is excited to announce the release of the B9 Audi S4/S5 3.0T TFSI charge pipe upgrade kit. Factory pipe that connects intercooler to the throttle body is made of brittle plastic. It’s wise to replace it with an all-aluminum high flowing CTS Turbo charge pipe.

Our 2.5″ charge pipe kit will increase flow and improve the reliability of your B9 Audi S4/S5. You’ll notice an increase in throttle response and a decrease in turbo lag.

Two water/methanol bungs provide an easy way to install injection nozzles.

Product Details

• 2.5″ mandrel-bent aluminum piping
• Billet throttle body inlet adapter
• Precision CNC machined MAP sensor flange
• Robust Black Powdercoated Finish
• 4 ply silicon connector
• Stainless Steel Clamps
• 2 x 1/8″ NPT Water-Methanol Bungs with plugs
• Compatible with factory and CTS Turbo intercoolers (may be compatible with other aftermarket intercoolers)

Fitment

• 2018 – current B9/B9.5 Audi S4 3.0T Turbo
• 2018 – current B9/B9.5 Audi S5 3.0T Turbo

DESCRIPTION

CTS Turbo B9 S4/S5 3.0T (EA839) high flow cat is made to maximize exhaust flow for highest power gains. Do not compromise performance and sound with factory parts – unleash your B9 S4/S5 3.0T potential!

Designed using the latest in CAD technology; this part is made to fit perfectly in place of restrictive factory catalytic converter. Manufactured from cast T304 stainless steel, hand TIG welded and back-purged to ensure years of reliable performance.

In addition to unleashing the power and performance of your 3.0T, the CTS B9 S4/S5 3.0T EA839 high flow cat will make your vehicle sound like an S-car really should. When installed with factory exhaust it produces a sporty growl with much more pronounced exhaust “crackle” on downshift. While up-shifting you will enjoy a confident “braappp!” as you bang through all 8 gears. The sound will be even louder if you already have an aftermarket exhaust system.

Product Details:

• Designed and tested on a real car in the real world
• 200 cell steel high-flow race cat
• Cast stainless steel body
• Replaces restrictive factory catalytic converter
• Great power upgrade with uncompromising performance
• Incredible sporty exhaust sound, subtle when cruising
• No drone with factory exhaust
• Install hardware included (gaskets not included)

Fitment:

• 2018+ Audi S4 3.0T (EA839)
• 2018+ Audi S5 3.0T (EA839)

To remove the CEL that will occur, proper tuning software must be used.