Audi - IROAD - SuperPro - P3 Cars - VW Central - Flow Designs - Whiteline - Autotech
Details:
Made from impact resistant polyethylene composite, the Flow Designs splitter set for the Audi S3 8P & 8P2 (Prefacelift Hatch) includes a front splitter & side splitter option. One of the best visual mods you can apply to your S3 8P/8P2 Sportback by far, with a simple to follow installation process.
Kit Includes:
Splitter
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Details:
Made from impact resistant polyethylene composite, the Flow Designs splitter set for the Audi S3 8P & 8P2 (Facelift Hatch) includes a front splitter & side splitter option. One of the best visual mods you can apply to your S3 8P/8P2 Hatch by far, with a simple to follow installation process.
KIT INCLUDES:
Splitter
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Regular Price:
$379.00
Special Price
$359.00
Details:
Made from impact resistant polyethylene composite, the Flow Designs splitter set for the Audi S3 8P & 8P2 (Facelift Hatch) includes a front splitter & side splitter option. One of the best visual mods you can apply to your S3 8P/8P2 Hatch by far, with a simple to follow installation process.
Kit Includes:
Splitter
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Made from impact resistant polyethylene composite, the Flow Designs splitter set for the Audi S3 8P & 8P2 includes a front splitter & side splitter option. One of the best visual mods you can apply to your S3 8P/8P2 by far, with a simple to follow installation process.
KIT INCLUDES:
- Splitters (Pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL:
- 10mm thick polyethylene composite, bevelled edges
FINISH:
- Hand polished satin black
Made from impact resistant polyethylene composite, the Flow Designs splitter set for the Audi S3 8P & 8P2 (Prefacelift Hatch) includes a front splitter & side splitter option. One of the best visual mods you can apply to your S3 8P/8P2 Sportback by far, with a simple to follow installation process.
KIT INCLUDES:
- Splitter
- 2 Flow Designs Stickers
- Fitting kit
MATERIAL:
- 10mm thick polyethylene composite, bevelled edges
FINISH:
- Hand polished satin black
Regular Price:
$379.00
Special Price
$359.00
Sale
Description:
Benefit Note:
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Specification:
SKU |
KDT975 |
Foot Note 1 |
Performance alloy arm |
Foot Note 2 |
X heavy duty - induces NVH |
Foot Note 3 |
3 Year / 60,000Kms |
Components Per |
2 Brackets, 2 Bushings, 2 Tubes, 3 Bolts, 1 Washer, 1 Nut |
Sub brand |
Performance |
EAN |
9319924462131 |
Regular Price:
$389.00
Special Price
$375.26
Sale
P3 V3 Gauge Features
Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
OEM Integration - installs in your vent for a sleek install while retaining air flow
Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
Regular Price:
$605.00
Special Price
$565.00
Suits Pre-facelift (PFL) Sportback only
Details:
The Flow Designs splitter set for the Audi RS3 8V (PFL Sportback) include front & side splitters with a pair of rear spats. These are the perfect addition to your RS3 hatch, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Splitters (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Suits Pre-facelift (PFL) Sportback only
Details:
The Flow Designs splitter set for the Audi RS3 8V (PFL Sportback) include front & side splitters with a pair of rear spats. These are the perfect addition to your RS3 hatch, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Spats (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Suits Pre-facelift Sportback only
Details:
Make your Audi S3 8V Sportback unique with the Flow Designs front splitter (Pre-facelift Hatch only). Flow Designs splitters are the most durable on the market as they will never crack & are chip and abrasion resistant, with guaranteed perfect fitment to your S3 Hatch (PFL) & easy installation.
Kit Includes:
Splitter
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.