-
Massive power and torque gains with matching ECU tune
-
Allows for Stage 2 or K04 turbo ECU tunes
-
1.5mm thick 304 stainless steel pipe construction
-
16mm thick turbo flange - prevents warping and leaks
-
200 cell per inch metal matrix CAT reduces emissions and smell without power loss
-
V-band mid-pipe connection for a leak free seal
-
Interlock core tough flex section allows engine movement without stress cracking
-
All installation hardware included -no unwanted trips to the parts store
Currently Shopping by
-
performance:
Air Intake
Electrical
Exhaust
-
Brands:
H&R Springs
Integrated Engineering
P3 Cars
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Audi - H&R Springs - Integrated Engineering - P3 Cars
P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – Audi A3 / S3 / RS3 8V
P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the flyRegular Price: $605.00
Special Price $565.00
IE Replacement 5″ Air Filter For IE Intake Kits
IE cone filters are specifically designed for high-flow and perfect fitment to the integrated velocity stack found on most IE cold air intake kits. This is a dry filter that can be oiled, however, we do not recommend air filter oiling on turbocharged or forced induction vehicles. The filter can be cleaned and re-used many times. If you find it difficult to clean your filter or find it severy stained, it may be time to replace the filter element. This is a direct replacement filter ready to keep your car on the road and performing at its best. Includes new filter clamp.$99.95
IE Audi B9 A4 & A5 Cold Air Intake - Fits Cars With NO MAF ONLY
INCREASE POWER AND SOUND WITH A COLD AIR INTAKE
The IE Audi B9 A4 & A5 2.0T Cold Air Intake is the perfect addition to any engine bay. Give your Audi added horsepower, torque, snappier throttle response, and an aggressive sound. Typical peak gains from our CAI are roughly 10-20 Horsepower and Torque.
POWER GAINS
The ram air design, velocity stack, and massive 55-inchfilter inlet help deliver the most HP possible from a cold intake system.
Expect peak gains of 10-20+HP/TQ on tuned engines.INCLUDED IN THE B9 IE CAI KIT
- IE Intake velocity stack & heatshield assembly
- IE Silicone turbo inlet pipe assembly
- IE 5” inlet performance air filter
- IE Turbo heat shield
- All necessary hardware (clamps, nuts, bolts, etc)
INCREASED AIR FLOW
This Intake delivers an impressive flow increase to feed your turbo. More cold air flow means more power; especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System.
DESIGN DETAILS
IE engineers set out to produce the highest performing cold air intake that looks great and fits like a factory installed part in your A4. The latest in computer design and 3D scanning technology were employed during the development process for a perfect fit and maximum performance. The final product resulted in the greatest performing and best-looking intake available.
HIGH-FLOW VELOCITY STACK
Delivering cold air to your engine is a must for making power. The velocity stack efficiently channels air as quickly as possible into the intake system. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling on heat shields.
CUSTOM HEAT SHIELD
IE uses a three piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay. A second heat shield is mounted above the turbocharger to further protect against power robbing heat off the exhaust and turbo.
PERFECT FITMENT
This Intake fits B9 Audi A4 and A5 without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle free fit. Additionally, the stock rubber mounts allow for engine movement which keeps intake components from getting damaged.
CLASSY AND CLEAN APPEARANCE
Wrinkle black powder coated velocity stack and heat shields result in a sleek and sporty appearance in any engine bay. As a final touch, all IE heat shields are finished with a classy, laser etched, stainless steel IE logo badge.
EASY INSTALLATION
Installation is a quick and easy install with basic tools. The process should take around an hour for most enthusiasts. CLICK HERE to view and download the IE B9 Cold Air Intake Install Guide.
INSTALL OVERVIEW VIDEO
DYNO POWER RESULTS
The following power result data was collected on our in-house Dynapack hub dyno. Dyno chart is as tested at 4500 feet altitude with SAE corrected numbers. Before and after results are direct back-to-back comparisons on a full bolt-on stage 2 B9 A4 2.0T engine. The only change made to the vehicle between testing is the swap from a stock intake with a new clean air filter to the IE Cold Air Intake Kit. Dyno power results are approximate and may vary from car to car.
HORSEPOWER & TORQUE DYNO CHART
HORSEPOWER & TORQUE POWER GAINS OVER STOCK
VEHICLE FITMENT
- Audi - A4 2015+ (B9) 2.0T
- Audi - A5 2015+ (B9) 2.0T
- Audi - A4 Allroad 2015+ (B9) 2.0T
This intake does not fit cars that have a MAF housing/sensor.
$789.00
IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
Your car deserves the performance, sound, and quality from an intake system that reflects the Audi S trim as a true performance machine. IE's engineers took a "no expense spared" approach to design the ultimate intake system solution that delivers on looks, fit, and most importantly -power!
PERFORMANCE TESTING
No part of this intake design is by accident, every inch is engineered and tested for performance first. Countless revisions undergo dyno testing, flow bench, and real-world use to maximize potential. As a result of this testing, the massive air filter, built-in velocity stack, large internal volume, ram air inlet, and bottom plate louvers ensure the intake supplies more than enough airflow across the entire powerband for any ECU tune or turbo setup.
CARBON FIBER - MORE THAN STYLE POINTS
In order to maximize airflow, a large internal volume is required to support the necessary amount of flow for the engine. Carbon fiber construction allows our engineers to create complex shapes and angles that just can not be achieved with sheet metal bends. This design style utilizes every millimeter available in oddly shaped modern engine bays for a very large air supply and smooth delivery. The finished product results in a performance design with a stylized high-end look for your engine bay.
UNIQUE SOUND
You drive a flagship S model Audi with a 6 cylinder turbocharged engine -make it sound like one!
The factory intake kills any and all engine sound to meet requirements for everything but fun. By upgrading to an IE intake system, you are taking full advantage of a performance design including the turbocharger spool, engine throttle, and diverter valve sounds that come along with it. The unique velocity stack and bottom louver design create a tuned engine note that sounds classy, yet powerful at the same time. This level of sound is not heard through other brand closed box intakes and is a much more refined sound than found with open element style intakes. Get ready to sing the song of power!
SEAMLESS DESIGN
The only fully carbon 1-piece intake design on the market offers more than a fantastic look alone. This reduces the chances of air leaks from an airbox/air duct joint, finicky installs, rubbing noises, or parts working loose over time while also providing an easier install. Furthermore, this is a complete all-inclusive intake system that does not require any additional parts sold separately to complete the intake.
EASY INSTALLATION
This Intake fits Audi B9 S4 & S5 3.0T V6 Turbocharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allow for natural engine movement which keeps intake components from getting damaged.
HIGH-FLOW VELOCITY STACK
By incorporating a professional motorsport style velocity stack into the airbox design, airflow is channeled from the large internal airbox volume into the turbocharger as quickly as possible. The bellmouth shape creates a very high inertia flow from the massive filter with very low drag or power-robbing turbulence.
MULTIPLE PRESSURE ZONES
Engineered to support any power level, the intake takes advantage of multiple air supply avenues. The front large air inlet receives outside high-pressure flow from the front of the grille and acts as a ram air design for the majority of the air supply. Additionally, the bottom plate louvers pull extra required air as needed from the low-pressure zone under the intake. These dual zones provide an unrestricted supply of air across the entire filter and ensure your intake will never be a power limiter for even the most extreme builds.
PRECISION FIT
To ensure a perfect fit, 3D scanning tools are used to create a digital duplicate of the vehicle's engine bay, grille, bumper, and hood. This provides an incredibly high-resolution environment to reverse engineer and prototype the intake design. This not only allow engineers to take advantage of all available room but also results in a perfect and extremely high-end install.
QUALITY COMPONENTS
No flimsy parts or quality sacrifices found here! Only the best materials and design features were used for a top-tier look, fit, function, and long-life reliability.
SPECIFICATIONS
- High-gloss true carbon fiber construction
- Factory style mounts
- Stainless hardware
- Multi-ply silicone with stop-flat edges
- High-quality clamps
- Powder-coated aluminum bottom plate
- Stainless laser-etched logo plate
- 5" pleated cotton filter
COMPATIBILITY
- 2017-On Audi S4 B9 3.0T Turbocharged
- 2017-On Audi S5 B9 3.0T Turbocharged
Regular Price: $1,894.00
Special Price $1,749.00
IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5
LEADING INTAKE FEATURES
- Increased airflow - Get the most out of your upgrades
- High-flow velocity stack - True performance design
- Sealed heatshield - Separates cold air from engine bay heat
- Perfect fitment - No modifications required to bolt-on
- Amazing sound - Releases awesome turbo and engine noise
- Looks great - Black powder coat, tight clearances, clean angles
AUDI B8 A4 & A5 COLD AIR INTAKE
You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.
EASY INSTALLATION
Installation is quick and easy to install with basic tools. The process should take under an hour for most enthusiasts. CLICK HERE to view and download the IE B8/B8.5 A4/A5 Cold Air Intake Install Guide.
VEHICLE FITMENT
- Audi - A4 2009-2015 (B8-B8.5) 2.0T
- Audi - A4 Allroad 2009-2015 (B8-B8.5) 2.0T
- Audi - A5 2009-2015 (B8-B8.5) 2.0T
$719.00
P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – Audi TT MK2 / RS
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration. OBD Multi-Gauge Features: Boost and Vacuum from OBD2 port Plug and Play install – just plug into your obd2 port and install into dash! Optional analog sensor for reading boost on tuned/big turbo cars. OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more! Optional Auto-Dim or Manual Dimmer Code Read/Clear 2 x universal 0-5v linear analog inputs Includes Digital Display, Custom OBD Wire Harness, Control Box. Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included. Applicable Models: Audi TT MK2 / RSRegular Price: $605.00
Special Price $544.50
Audi Mk1 TT - P3 OBD2 Multi-Gauge
P3 OBD2 Multi-Gauge
- Plug and Play install - just plug into your obd2 port and install into dash!
- Reads and clears OBD2 Codes
- OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer
- Peak Recall on all functions
- Boost and Vacuum from OBD2 port
- Optional 80psi analog boost sensor
- Optional Auto-Dim or Manual Dimmer
- 2 x universal 0-5v linear analog inputs
- Includes digital display, custom OBD2 wire harness and control box.
Optional 80psi boost sensor
- Allows gauge to read boost directly from intake/charge pipe
- Plugs directly into the OBD2 harness (no wiring required)
- Can be added/removed from the gauge at any time
Tubing kit
- Approximately 60" of 5/32" O.D. flexible plastic tubing
- 5/32" O.D. "T" fitting
- 3 sections of 5/32" I.D. vacuum hose
OEM vent option not available - Fits both left hand drive and right hand drive vehicles
P3 Gauges offer a Multifunction gauge that gives you the information you need while maintaining a clean OEM look. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All Multi-Gauges include an on-the-fly configuration menu for setting units (BAR/PSI, Farenheit/Celsius MPH/KPH), Shift light, analog boost sensor calibration and more.Regular Price: $605.00
Special Price $545.00
P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – Audi MK1 Q5/SQ5 Gauge (2008 - 2017)
Compatible with all Mk1 Q5 Models (8R)
P3 V3 Gauge Features
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
- OEM Integration - installs in your vent for a sleek install while retaining air flow
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature (Charge Air Cooler Temp) "CAC-AIr" on 3.0T models
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
OEM Vent Option
- We install the display in an OEM vent to make your install even easier
Optional Add-Ons
- P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
- Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Need more details?
Check out the V3 install page for configuration and installation info.
Regular Price: $594.00
Special Price $535.00
IE Audi 2.0T TSI Cold Air Intake | Fits B8/B8.5 A4 & A5 (2009-2013)
LEADING INTAKE FEATURES
- Increased airflow - Get the most out of your upgrades
- High-flow velocity stack - True performance design
- Sealed heatshield - Separates cold air from engine bay heat
- Perfect fitment - No modifications required to bolt-on
- Amazing sound - Releases awesome turbo and engine noise
- Looks great - Black powder coat, tight clearances, clean angles
AUDI B8 A4 & A5 COLD AIR INTAKE
You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.
EASY INSTALLATION
Installation is quick and easy to install with basic tools. The process should take under an hour for most enthusiasts. CLICK HERE to view and download the IE B8/B8.5 A4/A5 Cold Air Intake Install Guide.
VEHICLE FITMENT
- Audi - A4 2009-2015 (B8-B8.5) 2.0T
- Audi - A4 Allroad 2009-2015 (B8-B8.5) 2.0T
- Audi - A5 2009-2015 (B8-B8.5) 2.0T
Regular Price: $761.00
Special Price $719.00
IE 2.0T 3" Catted Downpipe Fits Golf MK5 & MK6 GTI & Audi A3 8P (FWD)
MK5 & MK6 2.0T DOWNPIPE FEATURES:
CONSUMER NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT ("PRODUCT"), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.
UNLOCK STAGE 2 POWER:
Equipping your MK5 or MK6 2.0T engine with an IE catted downpipe delivers additional horsepower, torque, and responsiveness when coupled with a matching Stage 2 or K04 turbo upgrade ECU tune. These significant power gains are added through the entire RPM band by allowing the turbocharger to flow freely through the 3" downpipe, high-flow catalytic converter, and mid-pipe. Careful tuning of the added sound from freeing up exhaust flow rewards you with an aggressive exhaust growl every time you touch the accelerator while minimizing cabin drone.
All IE exhaust systems are designed in-house using state of the art digital scanning for a perfect fit and manufactured from 1.5mm thick wall 304 stainless steel offering a lifetime of performance and fun.
SOUND TUNING:
Give your car an aggressive motorsport sound that will keep you addicted to the throttle pedal without annoying exhaust drone. Engineered with thick-wall tubing and precise bends the downpipe opens up an unrestricted exhaust with a tuned sound without the "tinny" drone common on cheap catless downpipe options.
HIGH-FLOW CATALYTIC CONVERTER (CAT):
IE's performance downpipe for the MK5 & MK6 2.0T engines include a high-flow 200 cell per inch metal matrix catalyst (CAT) on the mid pipe section. This included CAT greatly reduces emissions output and unwanted offensive smells common on all catless systems, without losing horsepower! Have all the benefits of catless performance and none of the drawbacks with the IE high-flow CAT system
BOLT-ON INSTALLATION:
The IE downpipe replaces the majority of the factory exhaust from the turbocharger all the way back to the factory rear exhaust just before the axles. The 16mm turbo flange bolts to the stock or a K04 turbocharger. The downpipe section includes a new mount bracket and utilizes the factory mount points along with a tough interlock core flex section, this allows engine and chassis movement without stressing or cracking your downpipe. Easily connect the downpipe and catted mid-pipe using the simple and strong v-band connection. Finally, the mid pipe mounts to the stock rear exhaust with the included 3" to 60mm slip-fit sleeve, or easily adapt it to your cat-back exhaust of choice. In-house digitally scanned and designed for an exact fit and includes all hardware to make the install easy and straight forward.
Installation should be completed by a professional and preferably on an auto lift. CLICK HERE to view and download the install guide.VEHICLE FITMENT GUIDE:
MAKE MODEL YEAR ENGINE AUDI
A3 (FWD only)
2006-2013 (8P)
2.0T FSI & TSI
VW
GTI
2006-2009 (MK5)
2.0T FSI & TSI
VW
GTI
2010-2014 (MK6)
2.0T TSI
VW
Jetta/GLI
2006-2010 (MK5)
2.0T FSI & TSI
VW
Jetta/GLI
2010-2013
2.0T FSI & TSI (non Gen 3)
Does NOT fit EA888 Gen 3 engines found in some late model (2013+) MK6 Jetta & GLI. Please verify engine type before purchasing.
$1,109.00
Copyright © 2021, VW Central, All Rights Reserved
SAFE & SECURE SHOPPING
