Audi | TT | MK2 (2008-2015) | 2.0 TSI |
Audi | A3 | 8P (2009-2013) | 2.0 TSI (FWD) |
Volkswagen | Tiguan | (2009-2011) | 2.0 TSI |
Volkswagen | Tiguan | (2012+) | 2.0 TSI |
Volkswagen | Jetta | MK5 (2010) | 2.0 TSI |
Volkswagen | Jetta | MK6 Sedan (2011-2017) | 2.0T GLI |
Volkswagen | Jetta | MK6 Sportwagen (2010-2017) | 1.8TSI/2.0TSI |
Volkswagen
Volkswagen |
Jetta
Golf/GTI/Rabbit |
MK6 Sedan (2014-2017)
MK5 (2009) |
1.8TSI/2.0T GLI
2.0 TSI |
Volkswagen | Golf/GTI/Rabbit | MK6 (2010-2014) | 2.0T |
Volkswagen | CC | (2009+) | 2.0 TSI |
Volkswagen | Beetle | Beetle (2012+) | 2.0 TSI |
We are proud to release the new our CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5. As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump). While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system. CTS has developed a fully integrated fueling system, which utilizes a Walbro 450LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 500HP. If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.
NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.
Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.
Product Details:
– Genuine Walbro High Output in-tank 450LPH E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners
Fitment:
We are proud to release the new our CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5. As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump). While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system. CTS has developed a fully integrated fueling system, which utilizes a Walbro 525LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 600HP. If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.
NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.
Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.
Product Details:
– Genuine Walbro High Output in-tank 525LPH HELLCAT E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners
Fitment:
The following VW fuel pumps are compatible: 5Q0919051BK, 5Q0919051BM
Regular Price: $699.00
Special Price $679.00
CTS Turbo is proud to release our 187mm Dual Pulley Upgrade Kit for Supercharged 3.0T V6 engines (press-on style).
The smaller diameter supercharger pulley and larger diameter crank pulley will increase the speed at which the supercharger spins and will increase the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not drastically increase stress or excessive wear on supercharger or engine components.
This kit features press-on style supercharger pulley. Check on your vehicle before ordering!
NOTE: This kit must be used with appropriate “Stage 2+” or equivalent performance software. Please contact your tuner. Use of upgraded heat exchanger is highly recommended.
Kit Includes:
1 x CTS Turbo Supercharger Pulley, Press-on, 57.3mm
1 x CTS Turbo Crank Pulley, 187mm
8 x Grade 12.9 bolts
1 x Bando Serpentine Belt (Made in the USA)
Fitment (check on vehicle):
VW has encountered a problem with the FSI camshaft and cam follower that could lead to damage to your engine's cylinder head.
This small part can play quite a big role in your engine's well-being. It conveys the movement of your camshaft into power for the high pressure fuel pump by riding directly on the camshaft lobe.
If it becomes worn to the point of breaking it can cause permanent damage to the camshaft, fuel pump, or both. It could also send metal particles into your cylinder head which can cause damage to moving parts. Without replacement, it is common for followers to have holes worn through them.
Replacing this follower as a form of preventative maintenance can save you from spending even more money and time replacing your fuel pump or camshaft from damage caused by a worn follower.
Regular Price: $64.00
Special Price $60.00
Regular Price: $1,499.00
Special Price $1,349.00
Stop missing shifts and your friends will stop laughing at you.
Eliminate free-play and slop in your factory shifter bracket by replacing soft factory rubber bushings.
Keep your shifts crisp and smooth; and stay ahead of the pack!
Kit includes:
3 x shifter bracket bushings (upper and lower halfs)
This part fits the following transmissions:
MK3: 02A ONLY
MK4: 02J, 02M
MK5: 02Q
MK6: 02Q
MK7: 6MT
Regular Price: $329.00
Special Price $289.00
Autotech is the premier manufacturer of fuel pump upgrades for the FSI engine because our kit offers the highest quality, solid engineering, and great value.
Our HPFP Kit can achieve flow rates 50% higher than the original pump, essentially removing pump limitations from the equation, even on high-end turbo upgrades.
Our HPFP kit continues to be the benchmark that imitators strive to reach. However, Autotech’s HPFP Kit is not easily duplicated.
There are many reasons why Autotech’s Kit is superior. Here are a few:
~Each piston (9.8mm) and cylinder in Autotech HPFP kit undergo high-precision grinding processes many times during their manufacture, ensuring that the most precise tolerances are maintained through the final step. Not the cheapest way to make them, but the best way.
~Each piston and cylinder are match-ground and serialized to ensure absolute precision and the utmost longevity.
~Autotech was the first to incorporate plasma DLC coating on HPFP components to reduce friction losses and increase performance. Others have tried to follow by adding a coating to their parts. However, the DLC process alone is not enough – it is not a cure for substandard precision – the parts must be engineered specifically for the process to take full advantage: Autotech’s are. The success we have in the field can attest to that.
~HPFP-specific mapping is now commonly available from tuners worldwide.
Tuners trust Autotech’s HPFP in their conversions and upgrades because it works, and works well.
Fits VW/Audi 2.0T FSI 2006-2008.5, MK6 Golf R.
2 kits required for V8 4.2L FSI Audi B7 RS4 / R8 V8 / B8 S5 models.
Regular Price: $629.00
Special Price $599.00