Currently Shopping by
-
Brands:
Eibach
Leyo Motorsport
Turbosmart
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Audi - Turbosmart - Leyo Motorsport - Eibach
Eibach Sportline Performance Lowering Springs – Golf MK8 1.4 TSI / Audi A3 35 8YS
Eibach PRO-KIT Performance Springs World‘s leading Performance Suspension Spring System
Regular Price: $580.00
Special Price $522.00
Eibach Pro-Kit Performance Lowering Springs – Golf MK8 1.4 TSI / Audi A3 35 8YS
Eibach PRO-KIT Performance Springs World‘s leading Performance Suspension Spring System
Regular Price: $547.00
Special Price $492.00
EIBACH PRO KIT LOWERING SPRINGS FOR AUDI A3 / S3 8Y QUATTRO SPORTBACK SEDAN
Description:
Eibach Pro Kit Lowering Springs for Audi A3 / S3 8Y Quattro Sportback Sedan
Lowering Front (mm): 25
Lowering Rear (mm): 20
Part Number: E10-15-031-01-22Vehicle Fitments for Eibach Pro-Kit Performance Spring Kit E10-15-031-01-22
Make
Model
Spec
AUDI A3 Sportback (8YA) 2.0 TDI quattro 2019 - On AUDI A3 Sportback (8YA) 2.0 TDI quattro 2019 - On AUDI A3 Sportback (8YA) 2.0 TFSI quattro 2019 - On AUDI A3 Sportback (8YA) S3 quattro 2019 - On AUDI A3 Sedan (8YA) S3 quattro 2019 - On AUDI A3 Sedan (8YA) S3 quattro 2019 - On AUDI A3 Sedan (8YA) S3 quattro 2019 - On AUDI A3 Sedan (8YA) S3 quattro 2019 - On Regular Price: $702.00
Special Price $632.00
LEYO AIR Cold Air Intake System
Description:
LEYO Cold Air Intake System for the Polo GTI (AW) guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 3’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. Factory MAF sensor part is used to prevent anomaly in MAF sensor reading.
LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance. Specially designed airbox prevents heat soak, effectively extracting colder induction air. No fabrication required for installation, bolts straight onto factory mounting points.
Note:
-Only for petrol EA888.3b MQB cars, not for diesel cars.
-Only for vehicles with air flow sensor on factory intake.
-This product is only for use on the race track.
Specifications:
-
OEM fitment requires no fabrication.
-
3' inch diameter for greater air induction.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Heat shield included.
-
Direct bolt on & easy installation.
-
Easy installation.
-
Intake Heat shield.
$699.99-
LEYO AIR Cold Air Intake System
Description:
Leyo Motorsport’s CAI for the A4 B9 is a must have for those seeking to upgrade their car. By removing some factory air flow restrictions together with a massive 4 inch conical filter, this intake guarantees more horse power at an affordable cost.
High grade aluminum heat shield effectively blocks out excess heat from the engine bay while is also significantly lighter than the steel heat shields found on the market. A secondary heat shield is incorporated into the design to block excessive heat from the exhaust manifold.
Installation is easy and straight forward, no fabrication required.
*This product is only for use on the race track.
*Please note that if your car has air flow sensor on the inlet pipe, this intake does not fit.
Specifications:
-
4” high flow conical filter.
-
Aluminum heat shield.
-
Increased induction sound.
-
Easy installation.
$699.00-
LEYO - EA211(MQB) MK7 1.4 COLD AIR INTAKE SYSTEM V2
Description:
Replace your restrictive factory airbox with this new airbox from Leyo Motorsport. Meticulously engineered, this final design is the culmination of numerous air flow rendering and analysis.
High flow air filter ensures maximum air flow eliminating the air flow restrictions found in the stock airbox. More air means more usable power especially when paired with Leyo charge pipe for the MK7 1.4.Installation is simple and straightforward, in just minutes your engine bay will be transformed with the addition of this Leyo intake kit.
*This product is only for use on the race track.
Specifications:
-
Track and dyno proven for greater horsepower gain.
-
Maximum airflow.
-
Unique quality and design.
-
Simple installation.
$499.99-
LEYO - Oil Catch Can Kit V2 Black
Description:
Protect your engine by preventing excessive crankcase oil vapor entering the intake and carbon build up with LEYO Oil Catch Can Kit. Also known as blow-by, oil vapor is produced under load, spirited driving elevates oil vapor level at an incredible rate, it is then circulated back into the intake tract resulting in carbon buildup of the intake valve, trapped oil residuals in both intake tract and intercooler. Unfiltered recirculated oil vapor will not only diminish performance, but also impose devastating effect to the engine.
Filtration begins immediately as oil vapor enters the uniquely designed LEYO Oil Catch Can filtration system, allowing pressurized oil vapor to enter freely, accelerates condensation, effectively traps oil with specially designed perforated stainless steel plates before cleaner gases recirculates back into the intake tract. Made with T304 stainless steel and high grade aluminum ensuring rust free, leak free operation. LEYO Oil Catch Can Kit had also included pre-installed drain valve, protecting your pride and joy has never been easier.
Specifications:
-
Installs under factory engine cover.
-
Uniquely designed filtration system.
-
Pre-installed drain valve for easy draining.
$919.00-
Turbosmart Kompact EM BOV Dual Port VR1 ' MK7/MK7.5 Golf / Audi 8V S3 / FL RS3 8V.5 / Skoda / EA888.3
The Kompact EM series combines world leading electronics and 20 years of blow off valve technology together to provide rapid response.$360.00
LEYO - Diverter Valve Kit
Description:
Struggling with the OEM Turbo Valve? Need to add that unique boost pressure sound? Make sure to get your hands on All New Re-Designed Leyo Motorsports latest in-house designed Diverter Valve. Leyo Motorsport Diverter Valve multi piece design is built and engineered to solve the failure issues associated with the OEM solenoid valves and their diaphragm resulting in boost leaks. It is built from 6061 Billet Aluminum with hard coated Anodized finish with an internal serviceable piston based design that provides greater reliability over the OEM as well as quicker throttle and turbo response. All components are made in-house by Japan CNC’s, inspected to 0.01mm tolerance by Japan CMM, laser etched and race proven.
Leyo Motorsport Diverter vavle has a unique and fully tested internal piston compared with other brands in order to get the maximum results in power. We are offering a stronger, more durable and reliable valve compared to the OEM unit. We do have uprated valve spring in stock that is sold separately.
Specifications:
-
Made from the highest quality T6061 billet aluminium construction.
-
Direct OEM replacement..
-
Improved throttle response
-
Consistent turbo boost.
-
Reduced turbo lag .
-
Fully compatible with OE electronics.
-
Fully serviceable piston .
-
Holds up to 600HP. (with optional uprated spring kit)
* Note : This DV kit comes supplied with BLACK / WHITE / YELLOW Spring. Uprated BLUE / RED Spring is Available for purchase.
SUGGESTED SPRING INSTALLATION
Above figure is only preference. Please refer vehicle modification needs.
$399.00-
LEYO - AUDI 8V.1/8V.2 RS3 THROTTLE PIPE (2 METH BUNG)
Description:
Leyo Motorsport’s new RS3 8V aluminum Throttle Pipe replaces the plastic OE pipe in between the throttle body and intercooler.
For those RS3 owners that is tuning your car to the max, Leyo Motorsport Throttle Pipe for the 8V RS3 provides you with not one, but two water methanol bung. Bent aluminum piping provides smoother air flow for greater efficiency.
Simple bolt on part with no modification necessary to the vehicle.
Specifications:-
2x WMI bung.
-
Bent aluminum piping with black powder coating.
-
Direct bolt on, no modification necessary.
$215.98-
SAFE & SECURE SHOPPING
