You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Audi

Set Descending Direction

   

Items 1 to 10 of 43 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. P3 Cars Analog Gauge - Audi B7 (2006-2008)

    P3 Cars - V3 2019 Release

    NEW FEATURES

    • New control box and updated screen bargraph
    • Updated harness with streamlined connectors
    • New improved color coded obd2 harness
    • Read D.T.C's on command
    • Remove unwanted PIDs / gauge modes
    • Configure units individually for English/Metric
    • Calibrate vehicle speed reading
    • Read AFR in Lambda (vehicles with wideband)
    • Auto-detect available PIDs / sensors
    • Pre-configured analog inputs for P3 Sensors

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    OEM Vent Option

    • We install the display in an OEM vent for your vehicle to make your install even easier.

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps

     Questions? Check out our P3 Analog Gauge install/config page for details.

  2. P3 Cars Analog Gauge - Audi 8J (2006-2014)

    P3 Cars - V3 2019 Release

    NEW FEATURES

    • New control box and updated screen bargraph
    • Updated harness with streamlined connectors
    • New improved color coded obd2 harness
    • Read D.T.C's on command
    • Remove unwanted PIDs / gauge modes
    • Configure units individually for English/Metric
    • Calibrate vehicle speed reading
    • Read AFR in Lambda (vehicles with wideband)
    • Auto-detect available PIDs / sensors
    • Pre-configured analog inputs for P3 Sensors

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    Compatible with all TT, TTS, and TTRS models

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    OEM Vent Option

    • We install the display in an OEM vent for your vehicle to make your install even easier.

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps

     Questions? Check out our P3 Analog Gauge install/config page for details.

  3. P3 Cars Analog Gauge - Audi 8P (2006-2013)

    P3 Cars - V3 2019 Release

    NEW FEATURES

    • New control box and updated screen bargraph
    • Updated harness with streamlined connectors
    • New improved color coded obd2 harness
    • Read D.T.C's on command
    • Remove unwanted PIDs / gauge modes
    • Configure units individually for English/Metric
    • Calibrate vehicle speed reading
    • Read AFR in Lambda (vehicles with wideband)
    • Auto-detect available PIDs / sensors
    • Pre-configured analog inputs for P3 Sensors

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    Compatible with all A3, S3, and RS3 models

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    OEM Vent Option

    • We install the display in an OEM vent for your vehicle to make your install even easier.

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps

     Questions? Check out our P3 Analog Gauge install/config page for details.

  4. P3 Cars Analog Gauge - Audi B8 (2008-2016)

    P3 Cars - V3 2019 Release

    NEW FEATURES

    • New control box and updated screen bargraph
    • Updated harness with streamlined connectors
    • New improved color coded obd2 harness
    • Read D.T.C's on command
    • Remove unwanted PIDs / gauge modes
    • Configure units individually for English/Metric
    • Calibrate vehicle speed reading
    • Read AFR in Lambda (vehicles with wideband)
    • Auto-detect available PIDs / sensors
    • Pre-configured analog inputs for P3 Sensors

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    OEM Vent Option

    • We install the display in an OEM vent for your vehicle to make your install even easier.

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps

     Questions? Check out our P3 Analog Gauge install/config page for details.

  5. CarPlay Wireless USB Adapter Dongle For Factory Fitted Vehicles CarPlay Wireless USB Adapter Dongle For Factory Fitted Vehicles
    CYBER MONDAY

    CarPlay Wireless USB Adapter Dongle For Factory Fitted Vehicles

    Are you sick and tired of plugging your Apple iPhone into the USB port every time you get into your car. At VW Central we have found the solution for factory fitted vehicles. Simply plug our USB adapter into the factory USB port and it will use Bluetooth to make a wireless connection with your vehicle. Plug and Play. No coding required. Please note this will not work if your vehicle doesn’t already have factory fitted CarPlay functionality. Suitable for VW Vehicles 2016+

    Regular Price: $250.00

    Special Price $125.00

  6. P3 V3 OBD2 - Audi 8S Gauge (2015+)

    P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration. OBD Multi-Gauge Features: Boost and Vacuum from OBD2 port Plug and Play install – just plug into your obd2 port and install into dash! Optional analog sensor for reading boost on tuned/big turbo cars. OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more! Optional Auto-Dim or Manual Dimmer Code Read/Clear 2 x universal 0-5v linear analog inputs Includes Digital Display, Custom OBD Wire Harness, Control Box. Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included. Applicable Models: Audi TT MK2 / RS
  7. P3 Analog Gauge - Audi 8S (2015+)

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    Optional Add-Ons

    • OBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
    • P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
    • LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
    • Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps
    $399.00
  8. IE Audi 3.0T Cold Air Intake | Fits 8R SQ5 & Q5

    UNIQUELY ENGINEERED

    This is not another mass produced "filter on a stick". IE's cold air intake has been specifically engineered and developed using professional racing design aspects and specialized computational flow dynamic software. The result is a true Motorsport intake system that sounds and performs for the track with a sophisticated and classy design.

    EASY POWER

    The ram air design, built-in velocity stack, and our massive 5-inch filter inlet help deliver the most HP possible from a cold intake system. Expect peak gains of 15-20+HP/TQ on tuned engines.

    DESIGN FEATURES

    INCREASED AIR FLOW

    Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE's intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds AWESOME too!

    HIGH-FLOW VELOCITY STACK

    Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.

    PRECISION FIT

    This Intake fits Audi 8R SQ5 & Q5 3.0T V6 Supercharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle-free fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.

    QUALITY COMPONENTS

    IE uses a multi-piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay further protecting against power robbing heat off the exhaust and supercharger.

    VEHICLE FITMENT GUIDE:

    MAKE MODEL YEAR ENGINE

    AUDI

    SQ5

    2014-2017 8R

    3.0T Supercharged

    AUDI

    Q5

    2009-2017 8R

    3.0T Supercharged

  9. IE Carbon Fiber Intake System For Audi C8 RS6 & RS7

    Description

    The IE Carbon Fiber Intake System for your Audi C8 RS6 or RS7 has been engineered for performance first through extensive airflow analysis and design testing. Get ready to experience massive real-world power and torque with 60-70HP gains on tuned engines! Elevate your driving experience by releasing the unique turbo and engine sound, bringing your twin-turbocharged V8 powerhouse to life!

    $3,599.00
  10. OBDeleven Pro Edition Next Generation Professional OBD2 Bluetooth Diagnostic Scan Tool for Android and iOS (Beta) - VW, Audi & Skoda - BONUS 200 CREDITS VALUED AT $60 OBDeleven Pro Edition Next Generation Professional OBD2 Bluetooth Diagnostic Scan Tool for Android and iOS (Beta) - VW, Audi & Skoda - BONUS 200 CREDITS VALUED AT $60
    CYBER MONDAY

    OBDeleven Pro Edition Next Generation Professional OBD2 Bluetooth Diagnostic Scan Tool for Android and iOS (Beta) - VW, Audi & Skoda - BONUS 200 CREDITS VALUED AT $60


    Professional diagnostic tool in your pocket.

    OBDeleven with 12 month  PRO Plan OBDeleven becomes a professional diagnostic tool. Operating with easy to use application it allows to fully access all car systems, program, monitor and activate various functions via your iOS, Android, and Huawei devices.

    Official and licensed full-featured software is constantly updated with new features. The programming temporarily is not supported on models that are manufactured from 2020 and have SFD protection. The negotiation regarding the support of these models is in progress.

    Pack includes:

    • Next generation device
    • 12 month PRO Plan
    • 200 credits
    • Pro Plan and 200 credits will be sent to your email


    Frequently Asked Questions:

    Q. What vehicles are supported with One-Click-Apps by OBDeleven
    A. Please refer to OBDeleven Official Supported Vehicles Page

    Q. Are OBDeleven credits included?

    A. Yes, the Pro Pack includes 200 Credits with the kit, and provides you with 12 months access on their PRO Plan

    Q. What vehicles are supported with this device?
    A. Vehicles built after 1996 that are Audi, Volkswagen, Seat, Lamborghini, Bentley and Skoda models are supported.

    Q. How do I know what tweaks or modifications I can code for my vehicle. 
    A. We do not provide support with the coding and adaptation, there are many YouTube guides for VCDS & OBDeleven:
    Here is an example of some MK7 Coding and Adaptation available for your OBDeleven device
    Q. Does this product require an internet connection?
    A. Yes, an internet connection is required whilst using the OBDeleven device. We recommend having good reception and a strong signal to ensure a stable connection with their servers.

    Q. If I require assistance with this product who do I contact?
    A. OBDeleven have a dedicated support area

    Q. Will any changes I do to my vehicle with OBDeleven have any effect on my factory vehicle warranty?
    A. Any form of modification may impact your warranty. VW Central will not take any responsibility for damage caused by using the OBDeleven device. 

    Q. Where do I find the OBDeleven App?
    A. The OBDeleven App is available on both the Apple App Store or for Android Users on the Google Play Store.

    OBDeleven - Kit Contents

    Features for iOS Devices:
    OBDeleven - iOS Support

    Features for Android Devices:

    OBDeleven - Features for Android

    Regular Price: $249.00

    Special Price $209.00

Set Descending Direction

   

Items 1 to 10 of 43 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5