You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Audi

Set Descending Direction

   

10 Item(s)

  1. IE 2.0T FSI Catch Can Kit For IE Billet Valve Cover | Fits MK5, MK6 Golf R, Mk2 TTS

    This recirculating catch can kit has been designed for use with the IE billet valve cover (IE part number: IEBAVC5as a simple install solution for your billet valve cover and catch can. 
    IE billet valve cover sold separately. 

     

    Product Features

    • Easy install catch can and valve cover kit

    • Complete kit, ready to install

    • Installs with IE billet valve cover (sold separately)

    • All components are black for a sleek stealth install

    • Braided stainless steel/Nylon hose

     

    $1,016.00
  2. IE Billet Valve Cover for 2.0T FSI Engines

    Update the look of your ugly stock plastic valve cover to a show-ready one piece machined billet aluminum IE valve cover on your 2.0T FSI (EA113) engine!

    PRODUCT DETAILS

    IE billet aluminum valve covers for the 2.0T FSI EA113 (timing belt driven) engines are a direct replacement for your factory valve cover for a clean updated look over the stock plastic valve cover. Designed as a perfect solution for a show-ready look or the base for your custom catch can project.

    MACHINED DESIGN

    Machined in-house from a solid block of aircraft grade aluminum for an attractive one piece design with a matching oil filler cap to finish off the look. The IE billet valve cover is machined to accept the factory valve cover gasket, so there is no worry of oil leaks.

    FOR USE WITH CUSTOM CATCH CAN SETUPS ONLY

    This valve cover design completely removes the factory PCV breather setup and will require a custom catch can kit or breather setup. IE complete catch can kits for the billet valve cover are available separately for select models (located in required hardware tab). To make setting up a custom breather or catch can kit easy, this valve cover features a single -10an breather outlet providing a simple start for a variety of fittings or hose ends. The breather outlet is located above an integrated baffle system to reduce oil escaping the breather outlet. These baffles are hand welded into the valve cover, ensuring they will not fail or fall into the cylinder head.

    PRODUCT FEATURES

     

    • Replaces factory plastic valve cover
    • Uses factory valve cover gasket
    • In-house CNC machined from aluminum
    • Includes o ring sealed matching billet oil cap
    • -10AN breather outlet for catch can setups

    ADDITIONAL PARTS REQUIRED

     

    EVAP CROSSOVER TUBE RELOCATION KIT

    The factory plastic valve cover has an integrated evap line crossing through the center of the valve cover. The IE billet valve cover does not have this vacuum line running through the center, and requires The IE Evap Crossover Tube Relocation Kit. This kit includes everything needed to re-run the EVAP line hiding it away for a stealthy look. IE Part Number: IEBAVC11


    CATCH CAN KIT FOR BILLET VALVE COVER

    The IE billet valve cover replaces the factory breather setup for a single -10AN breather outlet requiring you to run a custom catch can kit setup. IE has taken the leg work out of piecing together a catch can kit for transverse mounted 2.0T FSI engines commonly found in VW MK6 Golf R, MK5 GTI, Jetta, GLI and Audi MK2 TT, TTS, and A3 among others. This catch can kit includes everything you need to completely install the IE billet valve cover breather system. IE Part Number: IEBACC3

     

    VEHICLE FITMENT

    • Audi - A4 2005-2008 (B7) 2.0T FSI (EA113) engines
    • Audi - A6 2005-2011 (C6) 2.0T FSI (EA113) engines
    • Audi - A6 Allroad 2005-2011 (C6) 2.0T FSI (EA113) engines
    • Audi - TT 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines*
    • Audi - TTS 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines
    • Audi - A3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines*
    • Audi - S3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines
    • VW - GTI 2006-2009 (MK5) 2.0T FSI (EA113) engines*
    • VW - Golf R 2012-2012 (MK6) 2.0T FSI (EA113) engines
    • VW - Jetta & Jetta GLI 2006-2010 (MK5) 2.0T FSI (EA113) engines*
    • VW - Passat 2006-2010 (B6) 2.0T FSI (EA113) engines*
    • VW - EOS 2006-2015 (1F7) 2.0T FSI (EA113) engines*

    *This billet valve cover will only work on early model 2.0T EA113 engines. You can verify your the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1/Gen2 TSI engine and is not compatible with billet valve covers.

    $1,045.00
  3. CTS TURBO B8.5 S4, S5, Q5, SQ5; C7.5 A6, A7, Q7 3.0T SUPERCHARGER PULLEY – BOLT ON STYLE

    DESCRIPTION

    CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7

    THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.

    CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.

    NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
    Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.

    Most Stage 2+ software tunes are compatible with this kit.

    Product Details

    • Made in house at CTS Turbo in Canada
    • Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
    • OEM-spec honing and tolerances
    • Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
    • Nitride coated for long-lasting OEM looking finish
    • Includes belt and bolts required for install
    • Stock Size: 63.25mm, CTS Size: 57.3mm

    Fitment:

    • 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
    • 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
    • Late Audi Q7 with 3.0T SUPERCHARGED engine
    $249.00
  4. IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style

    DESCRIPTION

    CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7

    THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.

    CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.

    NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
    Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.

    Most Stage 2+ software tunes are compatible with this kit.

    Product Details

    • Made in house at CTS Turbo in Canada
    • Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
    • OEM-spec honing and tolerances
    • Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
    • Nitride coated for long-lasting OEM looking finish
    • Includes belt and bolts required for install
    • Stock Size: 63.25mm, CTS Size: 57.3mm

    Fitment:

    • 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
    • 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
    • Late Audi Q7 with 3.0T SUPERCHARGED engine
    $359.00
  5. IE FSI/TSI/TFSI FDS PERFORMANCE INTERCOOLER KIT | FITS MK5 & MK6 GTI / MK6 R | AUDI A3 S3 8P IE FSI/TSI/TFSI FDS PERFORMANCE INTERCOOLER KIT | FITS MK5 & MK6 GTI / MK6 R | AUDI A3 S3 8P
    Sale

    IE FSI/TSI/TFSI FDS PERFORMANCE INTERCOOLER KIT | FITS MK5 & MK6 GTI / MK6 R | AUDI A3 S3 8P

    The Integrated Engineering MK5/MK6 FDS intercooler system was built from the ground up to offer the ultimate in performance for your vehicle. When increasing the power output of your engine it is extremely important to ensure it has the proper cooling to match. It packs a very large intercooler core into the space available, a full 54% larger than the OEM core. This large core delivers cool air to the engine under all circumstances, increasing power and torque and simultaneously reducing heat soak.  

    Regular Price: $1,899.00

    Special Price $1,769.00

  6. CTS TURBO FMIC HOSE 90° MK5/MK6/A3

    This 90 degree silicon hose is the hose we use in our Audi A3, MK5 GTI and MK6 GTI/Golf R FMIC kits, if you need one we have replacements.
    Not for MQB or Gen3 TSI
    $140.00
  7. CTS B-COOL BILLET OIL FILTER HOUSING 2.0T FSI Fits VW Golf MK5 GTI / Golf 6R / Audi S3 8P / MK2 TTS & TT-RS

    CTS Turbo is proud to release our B-Cool Billet Oil Filter Housing.  The OE plastic filter housing is quite fragile and is know to become brittle and crack over time.  Each CTS Turbo B-Cool Billet Oil Filter Housing is constructed in house from T6061 Aluminum.  Not only does the B-Cool filter look good, but it works great.  We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.

    Installation is very straight forward and only required basic hand tools:

    Drain oil from filter housing, use a 36mm socket to remove the factory oil filter housing, install new filter, install new filter housing o-ring to CTS housing, reinstall on the car and tighted to 18 ft/lbs, refill engine oil.

    Product Details:

    •   Made in Canada from billet T6061 Aluminum
    •   Hard anodized black for stealth and longevity (machined finish shown)
    •   Uses OEM O-ring
    •   Installation of CTS-HW-0242 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
    •   OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
    •   Compatible with OEM Filter

    The CTS B-Cool Billet fits Audi, VW, Seat, Skoda models with EA113 2.0T FSI engines, 2.5L 5-cylinder engines and 2.5T 5-cylinder turbo engines.

    This part replaces the OE part# 06D 115 408B and 07K 115 408.

    Fitment:

    • MK6 Golf R, MK5 GTI (FSI), 8P Audi A3 (FSI), MK2 Audi TT-S (FSI)
    • MK5 and MK6 Golf, Jetta 2.5 5-cylinder
    • 8P Audi RS3 (not for facelift model)
    • MK2 Audi TT-RS (not for facelift models)
    $129.00
  8. CTS B-COOL BILLET 3.0T OIL FILTER HOUSING CTS B-COOL BILLET 3.0T OIL FILTER HOUSING
    Sale

    CTS B-COOL BILLET 3.0T OIL FILTER HOUSING

    DESCRIPTION

    CTS Turbo is proud to release our B-Cool Billet 3.0T Oil Filter Housing.  The OE plastic filter housing is quite fragile and is know to become brittle and crack over time.  Each CTS Turbo B-Cool Billet 3.0T Oil Filter Housing is constructed in house from T6061 Aluminum.  Not only does the B-Cool filter look good, but it works great.  We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.  Installation is very straight forward and only required basic hand tools.

    Product Details:

    •   Made in Canada from billet T6061 Aluminum
    •   Hard anodized black for stealth and longevity
    •   Uses OEM O-ring
    •   OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
    •   Installation of CTS-HW-0243 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
    •   Compatible with OEM Filter

    The CTS B-Cool Billet 3.0T Oil Filter Housing fits Audi 3.0T equipped models such as B8 & B8.5 S4, A6 etc.

    ADDITIONAL INFORMATION

    Weight 2 lbs
    Dimensions 6 × 6 × 6 in

    Model

    Generation

    MakeModelYearGeneration
    AUDI A6 2005 - 2011 C6
    AUDI A6 2012 - 2017 C7
    AUDI A7 2012 - 2017 C7
    AUDI S4 2010 - 2016 B8/8.5
    AUDI S5 2008 - 2017 B8/8.5

    Regular Price: $129.00

    Special Price $99.00

  9. IE FDS Intercooler for 2.0T & 1.8T Gen 3 MQB | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3 - 2021 Release IE FDS Intercooler for 2.0T & 1.8T Gen 3 MQB | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3 - 2021 Release
    Sale

    IE FDS Intercooler for 2.0T & 1.8T Gen 3 MQB | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3 - 2021 Release

    When you begin modifying your VW MK7/Audi MK3 Golf R, GTI, A3, or S3 it will become necessary to upgrade the intercooler. Once upgrades such as ECU tuning, exhaust systems, and turbo upgrades are introduced, intake air temperatures begin to rise, resulting in massive power loss.

    Regular Price: $1,899.00

    Special Price $1,729.00

  10. IE Intercooler Charge Pipes Upgrade Kit | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3

    UPGRADE YOUR PIPES

    This charge pipe upgrade Kit for 2.0T and 1.8T MK7/8V TSI engines includes two quality silicone intercooler inlet/outlet hoses and four high-strength band clamps for a direct installation. These hoses are a direct replacement for both IE FDS V2 Intercoolers and the stock factory equipped intercooler. Your new charge pipes feature a flow maximized design with no restrictions for optimized airflow. 

    Manufactured from multi-ply reinforced silicone for long-life and reliability against expansion or stretching under extreme boost pressures from upgraded turbos and tunes. The ends are molded with a inner flat edge that creates a stop for a perfect and easy no-fuss install and increased reliability against hoses popping off or leaking. 

    INCLUDES 

    • (1) Inlet silicone charge pipe
    • (1) Outlet silicone charge pipe
    • (4) Band clamps

    FEATURES

    • Fits with IE and Stock intercoolers
    • Direct bolt-on fitment
    • Smooth airflow transitions
    • Multi-ply reinforced silicone hoses
    • Internal stops for easy and perfect install
    $229.95
Set Descending Direction

   

10 Item(s)