Audi

Introducing the NEW XFORCE Downpipe offering to suit Audi PFL RS3 8V 09/2015-12/2016. 

Experience more performance from your Audi RS3 by bolting on our XFORCE Performance Exhaust Turbo Downpipe.

The turbo downpipe stainless steel pipe kit which is equipped with a high-flow cat to achieve maximum flow. Your Audi RS3 will come alive and demand attention!

Over 20 years of exhaust development and technical expertise have gone into creating the ultimate bolt-on performance downpipes, providing power increases throughout the rev range.

Dump-Pipe & Cat Kit

• Features

  • Stainless Steel
  • Non Polished 3.5″ – 3″ pipe work
  • Stainless Steel Flex Bellow
  • 200 Cell Metallic High Flow Cat
  • Additional Tuning pipe
  • 3″ to Twin OEM size adaptor pipe
  • Fitting kit supplied

  Part No:	ESRS315KITB
  Vehicle Model:	RS3
  Material:	304 Stainless Steel

  
  COMPATIBLE

DESCRIPTION

CTS Turbo B9 S4/S5 3.0T (EA839) high flow cat is made to maximize exhaust flow for highest power gains. Do not compromise performance and sound with factory parts – unleash your B9 S4/S5 3.0T potential!

Designed using the latest in CAD technology; this part is made to fit perfectly in place of restrictive factory catalytic converter. Manufactured from cast T304 stainless steel, hand TIG welded and back-purged to ensure years of reliable performance.

In addition to unleashing the power and performance of your 3.0T, the CTS B9 S4/S5 3.0T EA839 high flow cat will make your vehicle sound like an S-car really should. When installed with factory exhaust it produces a sporty growl with much more pronounced exhaust “crackle” on downshift. While up-shifting you will enjoy a confident “braappp!” as you bang through all 8 gears. The sound will be even louder if you already have an aftermarket exhaust system.

Product Details:

• Designed and tested on a real car in the real world
• 200 cell steel high-flow race cat
• Cast stainless steel body
• Replaces restrictive factory catalytic converter
• Great power upgrade with uncompromising performance
• Incredible sporty exhaust sound, subtle when cruising
• No drone with factory exhaust
• Install hardware included (gaskets not included)

Fitment:

• 2018+ Audi S4 3.0T (EA839)
• 2018+ Audi S5 3.0T (EA839)

To remove the CEL that will occur, proper tuning software must be used.

DESCRIPTION

CTS Turbo B9 Audi SQ5 High-Flow Cat is made to maximize exhaust flow for highest power gains. Do not compromise performance and sound with factory parts.

Designed using the latest in CAD technology; this part is made to fit perfectly in place of restrictive factory catalytic converter. Manufactured from CAST T304 stainless steel; hand TIG welded and back-purged to ensure years of reliable performance.

In addition to unleashing the power and performance of your 3.0T, the CTS Audi SQ5 High-Flow Cat will make your vehicle sound like an S-car really should. When installed with factory exhaust it produces a sporty growl with much more pronounced exhaust “crackle” on downshift. While up-shifting you will enjoy a confident “braappp!” as you bang through all 8 gears. The sound will be even louder if you already have an aftermarket exhaust system.

Product Details:

• Includes 200cell sport catalytic converter
• Designed and tested on a real car in the real world
• Cast T304 stainless steel, TIG welded back-purged construction
• Replaces restrictive factory catalytic converter
• Great power upgrade with uncompromising performance
• Incredible sporty exhaust sound, subtle when cruising
• No drone with factory exhaust

Fitment:

• 2018+ B9 Audi SQ5 3.oT

To remove the CEL that will occur, proper stage 2 tuning software must be used.

Product Description

• Direct OEM replacement
• Made from the highest quality Aircraft quality T6061 billet aluminium construction
• Fully compatible with OEM electronics
• Fully serviceable piston
• Capable to 600HP (with uprated spring kit)
• Utilising world leading springs for more precise operation and consistency
• All internal and external components have been made in the UK
• Pistons use heat stabilised Viton O-rings
• Lubricated with high temperature Mobil1 grease
• Fully serviceable and rebuildable in minutes
• Unlike other valves on the market, ours produce no check engine lights (EML)
• Improved dynamic throttle response
• Consistent turbo boost & reduced turbo lag
• Covered by the Forge Lifetime Warranty*

Forge Motorsport were the OG’s of this original groundbreaking design, and we still lead the marketplace with customer service and after care with this innovative blow off valve - Often copied never bettered

This is our piston version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CHHC, CZPA, CJXB and CJXC;US codes CPLA and CPPA)  including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition!

Not only do you get the famous Forge blow off valve sound but this valve also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on tuned engines and modified vehicles.

Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp!

This valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.

⭐ Great product! Fits perfect and sounds beautiful! 10/10 ⭐

⭐  Fitted the blow of valve today! Works and sounds perfect, not to mention the great customer service to make sure I ordered the correct one ⭐

⭐  Easy installation and sounds fantastic! Money well spent ⭐

In The Box:
1 x FMDVMK7A Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker

Description

DESCRIPTION
CTS Turbo is proud to release our 1.8T and 2.0T Atmospheric BOV KIT for EA888.3 equipped vehicles. The CTS Turbo Atmospheric BOV KIT (EA888.3) is made of billet construction and completely serviceable. Our kit is designed to work with all of the factory electronics, will not cause any check engine lights and is plug and play with no wiring extensions required. The CTS Turbo Atmospheric BOV KIT (EA888.3) replaces the factory plastic unit which has been prone to failure from torn diaphragms, cracked plastic, and electrical malfunctions. Our piston design ensures long life, easy installation, complete serviceability, great sound and great value. This valve is quite compact being slightly shorter than the stock unit and fits nicely even in the tight engine bays of today’s VAG cars.

Fitment:

MK7 Golf R (EA888 Gen 3)
MK7 Golf GTI (EA888 Gen 3)
MK7 Golf 1.8 TSI (EA888 Gen 3)
MKIII Audi S3 (EA888 Gen 3)
MKIII Audi A3 (EA888 Gen 3)
MK2 Audi TT (EA888 Gen 3)
Skoda Octavia VRS (EA888 Gen 3)
MKVI+ Jetta 1.8T and 2.0T (EA888 Gen 3)
MKII Beetle (EA888 Gen 3)
Passat B7 (EA888 Gen 3)

Product Features:
T6061 billet aluminum construction
Black anodized stealth finish
Fully compatible with OE electronics
Fully serviceable piston design
No additional wiring required
Substantial reliability improvement over OE
Compact design fits into tight spots easily

XForce is proud to announce our resonator delete kit for the MK7/MK7.5 Golf R and Audi 8V S3 platforms. Get all the benefits of using this resonator delete (based on factory Audi part) without the high price tag.

Features:

• Replaces the factory resonator on stock cat-back exhaust assembly with our high flow exhaust section.

• Adds a nice deep exhaust note without the need for replacing the entire exhaust system. 

• Increase exhaust sound

• Made from durable T304 Stainless Steel.

• Stainless steel exhaust band clamps included.

• Installs quickly using simple hand tools.

• Completely reversible install.

NOTE: compatible with aftermarket downpipes.