Audi

Introducing the NEW XFORCE Downpipe offering to suit Audi PFL RS3 8V 09/2015-12/2016. 

Experience more performance from your Audi RS3 by bolting on our XFORCE Performance Exhaust Turbo Downpipe.

The turbo downpipe stainless steel pipe kit which is equipped with a high-flow cat to achieve maximum flow. Your Audi RS3 will come alive and demand attention!

Over 20 years of exhaust development and technical expertise have gone into creating the ultimate bolt-on performance downpipes, providing power increases throughout the rev range.

Dump-Pipe & Cat Kit

• Features

  • Stainless Steel
  • Non Polished 3.5″ – 3″ pipe work
  • Stainless Steel Flex Bellow
  • 200 Cell Metallic High Flow Cat
  • Additional Tuning pipe
  • 3″ to Twin OEM size adaptor pipe
  • Fitting kit supplied

  Part No:	ESRS315KITB
  Vehicle Model:	RS3
  Material:	304 Stainless Steel

  
  COMPATIBLE

DESCRIPTION

CTS Turbo B9 S4/S5 3.0T (EA839) high flow cat is made to maximize exhaust flow for highest power gains. Do not compromise performance and sound with factory parts – unleash your B9 S4/S5 3.0T potential!

Designed using the latest in CAD technology; this part is made to fit perfectly in place of restrictive factory catalytic converter. Manufactured from cast T304 stainless steel, hand TIG welded and back-purged to ensure years of reliable performance.

In addition to unleashing the power and performance of your 3.0T, the CTS B9 S4/S5 3.0T EA839 high flow cat will make your vehicle sound like an S-car really should. When installed with factory exhaust it produces a sporty growl with much more pronounced exhaust “crackle” on downshift. While up-shifting you will enjoy a confident “braappp!” as you bang through all 8 gears. The sound will be even louder if you already have an aftermarket exhaust system.

Product Details:

• Designed and tested on a real car in the real world
• 200 cell steel high-flow race cat
• Cast stainless steel body
• Replaces restrictive factory catalytic converter
• Great power upgrade with uncompromising performance
• Incredible sporty exhaust sound, subtle when cruising
• No drone with factory exhaust
• Install hardware included (gaskets not included)

Fitment:

• 2018+ Audi S4 3.0T (EA839)
• 2018+ Audi S5 3.0T (EA839)

To remove the CEL that will occur, proper tuning software must be used.

DESCRIPTION

CTS Turbo B9 Audi SQ5 High-Flow Cat is made to maximize exhaust flow for highest power gains. Do not compromise performance and sound with factory parts.

Designed using the latest in CAD technology; this part is made to fit perfectly in place of restrictive factory catalytic converter. Manufactured from CAST T304 stainless steel; hand TIG welded and back-purged to ensure years of reliable performance.

In addition to unleashing the power and performance of your 3.0T, the CTS Audi SQ5 High-Flow Cat will make your vehicle sound like an S-car really should. When installed with factory exhaust it produces a sporty growl with much more pronounced exhaust “crackle” on downshift. While up-shifting you will enjoy a confident “braappp!” as you bang through all 8 gears. The sound will be even louder if you already have an aftermarket exhaust system.

Product Details:

• Includes 200cell sport catalytic converter
• Designed and tested on a real car in the real world
• Cast T304 stainless steel, TIG welded back-purged construction
• Replaces restrictive factory catalytic converter
• Great power upgrade with uncompromising performance
• Incredible sporty exhaust sound, subtle when cruising
• No drone with factory exhaust

Fitment:

• 2018+ B9 Audi SQ5 3.oT

To remove the CEL that will occur, proper stage 2 tuning software must be used.

XForce is proud to announce our resonator delete kit for the MK7/MK7.5 Golf R and Audi 8V S3 platforms. Get all the benefits of using this resonator delete (based on factory Audi part) without the high price tag.

Features:

• Replaces the factory resonator on stock cat-back exhaust assembly with our high flow exhaust section.

• Adds a nice deep exhaust note without the need for replacing the entire exhaust system. 

• Increase exhaust sound

• Made from durable T304 Stainless Steel.

• Stainless steel exhaust band clamps included.

• Installs quickly using simple hand tools.

• Completely reversible install.

NOTE: compatible with aftermarket downpipes. 

INCREASE POWER AND SOUND WITH A COLD AIR INTAKE

The IE Audi B9 A4 & A5 2.0T Cold Air Intake is the perfect addition to any engine bay. Give your Audi added horsepower, torque, snappier throttle response, and an aggressive sound. Typical peak gains from our CAI are roughly 10-20 Horsepower and Torque.

POWER GAINS

The ram air design, velocity stack, and massive 55-inchfilter inlet help deliver the most HP possible from a cold intake system.

Expect peak gains of 10-20+HP/TQ on tuned engines.

INCLUDED IN THE B9 IE CAI KIT

• IE Intake velocity stack & heatshield assembly
• IE Silicone turbo inlet pipe assembly
• IE 5” inlet performance air filter
• IE Turbo heat shield
• All necessary hardware (clamps, nuts, bolts, etc)

INCREASED AIR FLOW

This Intake delivers an impressive flow increase to feed your turbo. More cold air flow means more power; especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System.

DESIGN DETAILS

IE engineers set out to produce the highest performing cold air intake that looks great and fits like a factory installed part in your A4. The latest in computer design and 3D scanning technology were employed during the development process for a perfect fit and maximum performance. The final product resulted in the greatest performing and best-looking intake available.

HIGH-FLOW VELOCITY STACK

Delivering cold air to your engine is a must for making power. The velocity stack efficiently channels air as quickly as possible into the intake system. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling on heat shields.

CUSTOM HEAT SHIELD

IE uses a three piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay. A second heat shield is mounted above the turbocharger to further protect against power robbing heat off the exhaust and turbo.

PERFECT FITMENT

This Intake fits B9 Audi A4 and A5 without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle free fit. Additionally, the stock rubber mounts allow for engine movement which keeps intake components from getting damaged.

CLASSY AND CLEAN APPEARANCE

Wrinkle black powder coated velocity stack and heat shields result in a sleek and sporty appearance in any engine bay. As a final touch, all IE heat shields are finished with a classy, laser etched, stainless steel IE logo badge.

EASY INSTALLATION

Installation is a quick and easy install with basic tools. The process should take around an hour for most enthusiasts. CLICK HERE to view and download the IE B9 Cold Air Intake Install Guide.

INSTALL OVERVIEW VIDEO

DYNO POWER RESULTS

The following power result data was collected on our in-house Dynapack hub dyno. Dyno chart is as tested at 4500 feet altitude with SAE corrected numbers. Before and after results are direct back-to-back comparisons on a full bolt-on stage 2 B9 A4 2.0T engine. The only change made to the vehicle between testing is the swap from a stock intake with a new clean air filter to the IE Cold Air Intake Kit. Dyno power results are approximate and may vary from car to car.

HORSEPOWER & TORQUE DYNO CHART

HORSEPOWER & TORQUE POWER GAINS OVER STOCK

VEHICLE FITMENT

• Audi - A4 2015+ (B9) 2.0T
• Audi - A5 2015+ (B9) 2.0T
• Audi - A4 Allroad 2015+ (B9) 2.0T

This intake does not fit cars that have a MAF housing/sensor.