A3 - CTS Turbo - Integrated Engineering - Supernova - VW Central

Audi	TT	MK2 (2008-2015)	2.0 TSI
Audi	A3	8P (2009-2013)	2.0 TSI (FWD)
Volkswagen	Tiguan	(2009-2011)	2.0 TSI
Volkswagen	Tiguan	(2012+)	2.0 TSI
Volkswagen	Jetta	MK5 (2010)	2.0 TSI
Volkswagen	Jetta	MK6 Sedan (2011-2017)	2.0T GLI
Volkswagen	Jetta	MK6 Sportwagen (2010-2017)	1.8TSI/2.0TSI
Volkswagen Volkswagen	Jetta Golf/GTI/Rabbit	MK6 Sedan (2014-2017) MK5 (2009)	1.8TSI/2.0T GLI 2.0 TSI
Volkswagen	Golf/GTI/Rabbit	MK6 (2010-2014)	2.0T
Volkswagen	CC	(2009+)	2.0 TSI
Volkswagen	Beetle	Beetle (2012+)	2.0 TSI

One of the most common failures on the 2.0T FSI engine is the factory pressure-relief valve. These valves are in place to recirculate crankcase gases into the intake manifold once they open. Although this works fine for a few thousand miles, they begin to leak over time and cause boost to go past the valve into the valve cover. This not only causes an oily mess in the engine bay from crankcase pressure, but a rough idle, fuel economy decline and boost loss. With boost pressure far below where it should be, it is common to notice significant power losses and poor drivability.

---

MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015) 8V Audi A3/S3 (up to production date Sept 27, 2015) MK3 Audi TT/TT-S (up to production date Sept 27, 2015)

Mandrel bent aluminum piping with durable black powder coating - CNC machined MAP flange - 4 Ply silicon connectors with stainless steel clamps - Integrated water methanol bung with plug - Stainless steel clamps

Audi - S1 EA888 Gen 3 - 2.0 TFSI Audi - A3 & S3 (MK3) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI Audi - A4 / Allroad (B8 & B8.5) - EA888 Gen 2 & 3 - 2.0 TFSI Audi - A5 (B8 & B8.5) - EA888 Gen 2 & 3 - 2.0 TFSI Audi - A6 (C6 & C7) - EA888 Gen 2 - 2.0 TFSI Audi - Q5 - EA888 Gen 2 & 3 - 2.0 TFSI Audi - TT / TTS (MK3) - EA888 Gen 3 - and 2.0 TFSI VW - Golf / GTI / R (MK7) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI

At CTS Turbo we are proud to announce our new air intake system for the VW MK7 & MK7.5 Golf/GTI, MK7 & MK7.5 Golf R and facelift Audi A3/S3 is ready! This is the largest intake available, and it is excellent for tuned vehicles that require the extra air flow. 

The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system.  Air then flows through our 3.5" high flow air filter, which utilizes an inverted cone design for maximum engine breathing.  Our 3.5" CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air directly into the the engine, minimizing turbulence from unnecessary connections. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.

Peak power gains range from 10-15HP on an otherwise stock vehicle. We recommend disabling your Soundaktor (noise amplifier) to fully enjoy the true sound of your motor and remove excessive drone caused by the device.

Product Details:

• Mandrel bent large bore 3.5" aluminum piping with black powder coating
• Coveted Laser etched //CTS Turbo logo
• 3.5" Reusable air filter with inverted cone design
• 4 Ply silicon connectors with stainless steel clamps
• Sealed air box
• Bracketry to prevent rattling under engine torquing
• Billet SAI breather adapter and filter (Optional in drop down menu)

• 2014+ VW Golf (all models)
• 2014+ VW GTI 
• 2014+ VW Golf R
• 2018+ Audi A3 (all models)
• 2018+ Audi S3

 NOTE: If you have a Golf, GTI or A3 you will require the SAI breather adapter and filter. Only for vehicles WITHOUT a MAF sensor.

CONFIRM ON YOUR CAR BEFORE ORDERING!

DESCRIPTION CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler. Product Details: 60mm aluminum piping with CTS logo 5-ply silicon coupler Factory mounting points are used for perfect fitment Durable black powdercoat finish For 7-speed DSG/S-tronic transmissions only Compatible with factory and upgraded turbos Compatible with factory and upgraded intakes Compatible with factory and upgraded intercoolers Parts Included: Upper turbo outlet silicon Lower turbo outlet pipe 2 clamps Installation hardware Fitment: 2018+ VW Golf R DSG 7-speed 2019+ VW GLI DSG 7-speed 2019+ VW GTI DSG 7-speed 2018+ Audi A3 S-Tronic 7-speed 2018+ Audi S3 S-Tronic 7-speed 2018+ Audi TT, TT-S S-Tronic 7-speed NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275

The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold. The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.