A3 - CTS Turbo - H&R Springs - XFORCE - Genuine Audi - Genuine VW - P3 Cars - Eibach
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 Sensors
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
*Available for both pre and post facelift vehicles*
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
CTS Turbo is proud to offer our upgraded turbo inlet hose for the MK7+ VW and 8V Audi MQB vehicles. The factory turbo inlet hose is corrugated with internal ridges that disrupt air flow. Not only do they reduce air flow, but the plastic can become weak over time causing leaks and reduced performance.
The CTS Turbo turbo inlet hose is constructed from 5-ply silicone that will not collapse, even under heavy load. This is MUCH stronger than other inlet hoses offered by different companies. Collapsing intake hose can cause turbo to fail!!
The CTS Turbo inlet hose allows for smooth uninterrupted flow and more air pumping through your engine!
Features:
- Designed to fit factory airbox and any turbo inlet pipe
- 5-ply silicone construction
- Smooth interior
- High strength hose clamps
Components:
1 x CTS Turbo MQB Turbo Inlet Hose
2 x Hose clamps
Fits the following vehicles:
- MK7 VW GTI
- MK7 VW Golf R
- MK7 Audi A3
- MK7 Audi S3
The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold.
The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.
Sale
Mandrel bent aluminum piping with black powder coating
- CNC machined MAP flange
- DV relocation/noise pipe bung
- 4 Ply silicon connectors with stainless steel clamps
- Integrated water methanol bung with plug
- Stainless steel clamps
Regular Price:
$299.00
Special Price
$279.00
MK5 MY09 onwards
MK6 R/GTI/Golf/Jetta/GLI
8J Audi A3/TT
8P Audi A3/TT
For EA888.1 Gen 1 TSI models (2009-2013)
- Mandrel bent aluminum piping with black powder coating
- CNC machined MAP flange - DV relocation/noise pipe bung
- 4 Ply silicon connectors with stainless steel clamps
- Integrated water methanol bung with plug
- Stainless steel clamps
The CTS Turbo TSI Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle.
Our Turbo Outlet Pipe features 2.25" diameter aluminum tube for optimized flow. The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap. The billet anodized turbo to TOP connector, 2.25" coupler and premium clamps top this package off. If you're looking for a simple bolt on modification that will optimize flow and increase power, then this part is for you.
Sale
This Turbo Outlet Pipe is designed to fit our CTS TSI K04 kit and replaces the narrow ‘pancake’ pipe that comes as factory equipment on your vehicle.
This Turbo Outlet Pipe features 2.25″ diameter aluminum tube for optimized flow.
The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap.
This pipe is designed to the CTS Turbo K04 kits but it may work for other K04 kits (other kits fitment not guaranteed).
Product Details:
- 2.25” Mandrel bent tube
- CNC machined FMIC mating flange
- Black powder coated finish
- Laser cut mounting bracket
- Designed for fitment on cars with CTS TSI K04 upgrade or other K04 upgrade kits (APR, AWE Tuning, etc)
PLEASE NOTE: This product does not include the silicone as per the image. It is expected that you use the silicone that came included with your K04 Upgrade Kit.
Regular Price:
$379.00
Special Price
$329.00
Audi |
TT |
MK2 (2008-2015) |
2.0 TSI |
Audi |
A3 |
8P (2009-2013) |
2.0 TSI (FWD) |
Volkswagen |
Tiguan |
(2009-2011) |
2.0 TSI |
Volkswagen |
Tiguan |
(2012+) |
2.0 TSI |
Volkswagen |
Jetta |
MK5 (2010) |
2.0 TSI |
Volkswagen |
Jetta |
MK6 Sedan (2011-2017) |
2.0T GLI |
Volkswagen |
Jetta |
MK6 Sportwagen (2010-2017) |
1.8TSI/2.0TSI |
Volkswagen
Volkswagen
|
Jetta
Golf/GTI/Rabbit
|
MK6 Sedan (2014-2017)
MK5 (2009)
|
1.8TSI/2.0T GLI
2.0 TSI
|
Volkswagen |
Golf/GTI/Rabbit |
MK6 (2010-2014) |
2.0T |
Volkswagen |
CC |
(2009+) |
2.0 TSI |
Volkswagen |
Beetle |
Beetle (2012+) |
2.0 TSI |
2.5" Aluminum piping
- OEM style pipe bracket
- High quality tig welds
- Durable powdercoat finish
Hardware Included:
- Silicone coupler
- 2 x hose clamps
- Installation hardware
- Upper turbo outlet pipe
- Lower turbo outlet pipe