Protect your engine by preventing excessive crankcase oil vapor entering the intake and carbon build up with LEYO Oil Catch Can Kit. Also known as blow-by, oil vapor is produced under load, spirited driving elevates oil vapor level at an incredible rate, it is then circulated back into the intake tract resulting in carbon buildup of the intake valve, trapped oil residuals in both intake tract and intercooler. Unfiltered recirculated oil vapor will not only diminish performance, but also impose devastating effect to the engine.
Filtration begins immediately as oil vapor enters the uniquely designed LEYO Oil Catch Can filtration system, allowing pressurized oil vapor to enter freely, accelerates condensation, effectively traps oil with specially designed perforated stainless steel plates before cleaner gases recirculates back into the intake tract. Made with T304 stainless steel and high grade aluminum ensuring rust free, leak free operation. LEYO Oil Catch Can Kit had also included pre-installed drain valve, protecting your pride and joy has never been easier.
Specifications:
Installs under factory engine cover.
Uniquely designed filtration system.
Pre-installed drain valve for easy draining.
Description:
This MQB Cold Air Intake System for the 2.0T engine guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
Made with high grade full aluminum 3.5’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance
This newly designed intake can be used as both a closed or an open intake kit. Specially designed heat shield prevents heat soak, effectively extracting colder induction air.
Installation is simple and straight forward, no fabrication required.
Specifications:
OEM fitment requires no fabrication.
3.5’inch diameter for greater air induction.
Unique quality and design.
Track and dyno proven for greater horsepower gain.
Direct bolt on & easy installation.
Open or closed intake design.
We are proud to release the new our CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5. As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump). While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system. CTS has developed a fully integrated fueling system, which utilizes a Walbro 525LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 600HP. If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.
NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.
Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.
Product Details:
– Genuine Walbro High Output in-tank 525LPH HELLCAT E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners
Fitment:
The following VW fuel pumps are compatible: 5Q0919051BK, 5Q0919051BM
Regular Price: $699.00
Special Price $679.00
We are proud to release the new our CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5. As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump). While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system. CTS has developed a fully integrated fueling system, which utilizes a Walbro 450LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 500HP. If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.
NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.
Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.
Product Details:
– Genuine Walbro High Output in-tank 450LPH E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners
Fitment:
H&R sport springs 28826-1 for Audi are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. H&R springs have superb ride comfort and increased driving convenience.
All H&R springs are made from high-strength spring steel to ensure first-class quality and performance. The springs are designed in such a way that they can be easily combined with standard or retrofit dampers and offer a sporty look. A powder coating also improves corrosion resistance while giving the spring a high-quality appearance.
Product benefits:
The secret to such success? To put it simply, the technology H&R employs to develop cutting-edge suspension systems for competition use is the very same used to develop innovative suspension components for street-driven cars. In addition, H&R maintains extensive involvement in several touring car, GT and Monoposto racing series. Not to mention the Formula 1- where each circuit may have its own demanding characteristics.
In the harsh environs of competition, H&R is able to test new materials and innovate production technologies. All of which can help racing teams adapt to changing road conditions accurately and efficiently.
Vehicle Compatibility:
Manufacturer |
Model |
Type |
Lowering in mm (FA/RA) |
Axle load (FA/RA) |
Audi |
A3 incl. Lim./ Sedan + Sportback Quattro |
Type 8V 4WD without MRC and/or Audi Drive Select/ without MRC and/ or Audi Drive Select for multi-/four-link rear axle / for multi-link /four-link RA |
40/40 |
/ |
Regular Price: $1,899.00
Special Price $1,729.00
LEYO Cold Air Intake System for the Polo GTI (AW) guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 3’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. Factory MAF sensor part is used to prevent anomaly in MAF sensor reading.
LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance. Specially designed airbox prevents heat soak, effectively extracting colder induction air. No fabrication required for installation, bolts straight onto factory mounting points.
Note:
-Only for petrol EA888.3b MQB cars, not for diesel cars.
-Only for vehicles with air flow sensor on factory intake.
-This product is only for use on the race track.
Specifications:
OEM fitment requires no fabrication.
3' inch diameter for greater air induction.
Unique quality and design.
Track and dyno proven for greater horsepower gain.
Heat shield included.
Direct bolt on & easy installation.
Easy installation.
Intake Heat shield.
Regular Price: $629.00
Special Price $549.00
Regular Price: $605.00
Special Price $565.00