A4 - CTS Turbo - H&R Springs - Integrated Engineering - 034Motorsport - Genuine VW - P3 Cars - Eibach - Flow Designs
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 Sensors
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
OEM Vent Option
- We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 Sensors
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
OEM Vent Option
- We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
Sale
VEHICLE FITMENT
- AUDI - S4 2017+ (B9) 3.0T engine
- AUDI - A4 2017+ (B9) 2.0T engine
- AUDI - A4 Allroad 2017+ (B9) 2.0T engine
Does not fit S5 or A5 platforms.
Regular Price:
$1,899.00
Special Price
$1,769.00
The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold.
The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.
Sale
One of the most common failures on the 2.0T FSI engine is the factory pressure-relief valve. These valves are in place to recirculate crankcase gases into the intake manifold once they open. Although this works fine for a few thousand miles, they begin to leak over time and cause boost to go past the valve into the valve cover. This not only causes an oily mess in the engine bay from crankcase pressure, but a rough idle, fuel economy decline and boost loss. With boost pressure far below where it should be, it is common to notice significant power losses and poor drivability.
Regular Price:
$184.00
Special Price
$179.00
Sale
VW has encountered a problem with the FSI camshaft and cam follower that could lead to damage to your engine's cylinder head.
This small part can play quite a big role in your engine's well-being. It conveys the movement of your camshaft into power for the high pressure fuel pump by riding directly on the camshaft lobe.
If it becomes worn to the point of breaking it can cause permanent damage to the camshaft, fuel pump, or both. It could also send metal particles into your cylinder head which can cause damage to moving parts. Without replacement, it is common for followers to have holes worn through them.
Replacing this follower as a form of preventative maintenance can save you from spending even more money and time replacing your fuel pump or camshaft from damage caused by a worn follower.
Regular Price:
$142.00
Special Price
$129.00
Audi - S1 EA888 Gen 3 - 2.0 TFSI
Audi - A3 & S3 (MK3) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI
Audi - A4 / Allroad (B8 & B8.5) - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - A5 (B8 & B8.5) - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - A6 (C6 & C7) - EA888 Gen 2 - 2.0 TFSI
Audi - Q5 - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - TT / TTS (MK3) - EA888 Gen 3 - and 2.0 TFSI
VW - Golf / GTI / R (MK7) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI
At CTS Turbo we are proud to announce our new air intake system for the B8/B8.5 Audi A4/A5 with Gen2 EA888 2.0T engines.
Sale
LEADING INTAKE FEATURES
- Increased airflow - Get the most out of your upgrades
- High-flow velocity stack - True performance design
- Sealed heatshield - Separates cold air from engine bay heat
- Perfect fitment - No modifications required to bolt-on
- Amazing sound - Releases awesome turbo and engine noise
- Looks great - Black powder coat, tight clearances, clean angles
AUDI B8 A4 & A5 COLD AIR INTAKE
You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.
EASY INSTALLATION
Installation is quick and easy to install with basic tools. The process should take under an hour for most enthusiasts. CLICK HERE to view and download the IE B8/B8.5 A4/A5 Cold Air Intake Install Guide.
VEHICLE FITMENT
- Audi - A4 2009-2015 (B8-B8.5) 2.0T
- Audi - A4 Allroad 2009-2015 (B8-B8.5) 2.0T
- Audi - A5 2009-2015 (B8-B8.5) 2.0T
Regular Price:
$761.00
Special Price
$719.00
Audi - A3 & S3 (8V & 8S) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI
VW - Golf / GTI / R (MK7 & MK7.5) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI