DETAILS Our adjustable rear spat winglets will bolt directly onto our RS3 8V Sedan FL rear spats thanks to the pre-pressed in threaded brass fittings on our rear spats. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
DETAILS The Audi RS3 8V Flow-Lock Rear Diffuser makes extensive use of our Flow-Lock technology- a design system that utilises precision engineering and cutting techniques to create an integral mechanical bond. What this means for you is a durable, stylish and integrated rear setup with no visible fasteners. The perfect view for everyone behind you.
Our RS3 8V Flow-Lock Diffuser paired with rear spats and winglets work together to complete the enhanced aggression our splitter kits bring to your RS3 8V Sedan. Our rear diffuser and spat kits can be fitted without removing the rear bumper from your vehicle.
Valance is installed to the car through bolts and nuts while the Flow-Lock diffuser fins simply click into the valance (once locked into the valance it is secure). It is also possible to install when your car is on the ground.
KIT INCLUDES:
RS3 8V Sedan FL Flow-Lock Rear Diffuser
2 Flow Designs Stickers
Fitting kit
MATERIAL & FINISH:
10mm thick polyethylene composite rear valance with bevelled edges
4.5mm thick Scratch resistant textured ABS Flow-Lock Diffuser Fins
Now fully compatible with all 2018-2020 Audi RS3/TTRS 2.5T DAZA and DNWA engines, this is one kit to fit them all!
CTS Turbo is proud to announce our improved 8V, 8V.2/8S Audi RS3/TTRS Throttle Body Inlet Kit for DAZA and DNWA
Our high flow throttle body inlet is designed it to be larger, but also more aerodynamic than the stock part. Our inlet has a 56% internal volume increase over the stock inlet. Using the latest CAD software, the shape of the inlet tract was flow optimized and cast from aluminum for best performance. All critical parts were CNC machined to ensure perfect fitment and performance.
We have also included our machined throttle body spacer from with two additional ports for boost reference and methanol injection; as well and a high-flow 2.75″ throttle inlet pipe. Custom-made silicone couplers and t-bolt clamps allow for seamless, easy installation.
Features:
CAD optimized for maximum flow, 56% larger than factory
Cast aluminum throttle body elbow, billet aluminum spacer
CNC machined in house for perfect fitment
Direct replacement for factory parts between the cold side of the intercooler and the throttle body
HP gain of up to 20hp on stock turbo, even more with big turbo upgrades
Compatible with factory intake, CTS Turbo intakes and most other popular intakes (not compatible with Eventuri intake)
Compatible with factory and aftermarket intercoolers
Includes a large-bore 2.75″ charge pipe and custom silicone couplers
Two extra 1/8″ NPT bungs on the charge pipe for watermeth nozzles
Compatible with 1-bolt and 2-bolt pressure sensors
DV flange is based on factory design
Includes hoses and fittings to install on 2019+ DNWA engines
Fitment:
8V and 8V.2 Audi RS3 (2018-2020) – DAZA and DNWA models
Complete the aggressive aesthetic of your RS3 8V Sedan FL rear with our rear spats - known for their durability and strength. Pre-pressed brass fittings on the rear spats allow for installation of our rear winglets to allow for further customisation to suit your individual taste.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Our adjustable front splitter winglets will bolt directly onto our RS3 8V Sedan FL front lip splitter thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
Front Lip Splitter and front extensions sold separately.
KIT INCLUDES:
RS3 8V Sedan FL Front Lip Splitter Winglets (pair)
1 kit required: TT RS 2.5L / RS3 Sportback 2.5L / B8 S4 3.0T / SQ5 Q7 3.0T / A6 A7 A8 3.0T / Touareg 3.0T / B8.5 S5 3.0T/ B8 A4 2.0T / B8.5 A4 2.0T
2 kits required: Audi 4.0T, 5.0T TFSI Audi R8 V10 / Lamborghini Gallardo / C6 Audi RS6 / 4.0T Audi S6, S7, RS6, RS7, S8
Also fits Audi Audi 09-14 2.0T B8 A4 A5 A6 Q5 TT 2.0T
Autotech is the premier manufacturer of fuel pump upgrades for the FSI engine because our kit offers the highest quality, solid engineering, and great value.
Upon installing the pump, notable increases include 5% Torque increase and an additional 10Bar of fuel rail pressure.
Our HPFP kit continues to be the benchmark that imitators strive to reach. However, Autotech’s HPFP Kit is not easily duplicated.
There are many reasons why Autotech’s Kit is superior. Here are a few:
~Each piston and cylinder in Autotech HPFP kit undergo high-precision grinding processes many times during their manufacture, ensuring that the most precise tolerances are maintained through the final step. Not the cheapest way to make them, but the best way.
~Each piston and cylinder are match-ground and serialized to ensure absolute precision and the utmost longevity.
~Autotech was the first to incorporate plasma DLC coating on HPFP components to reduce friction losses and increase performance. Others have tried to follow by adding a coating to their parts. However, the DLC process alone is not enough – it is not a cure for substandard precision – the parts must be engineered specifically for the process to take full advantage: Autotech’s are. The success we have in the field can attest to that.
~HPFP-specific mapping is now commonly available from tuners worldwide.
Tuners trust Autotech’s HPFP in their conversions and upgrades because it works, and works well.
Suits Pre-facelift (PFL) Sportback only
Details:
The Flow Designs splitter set for the Audi RS3 8V (PFL Sportback) include front & side splitters with a pair of rear spats. These are the perfect addition to your RS3 hatch, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Splitters (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Suits Pre-facelift (PFL) Sportback only
Details:
The Flow Designs splitter set for the Audi RS3 8V (PFL Sportback) include front & side splitters with a pair of rear spats. These are the perfect addition to your RS3 hatch, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Spats (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.