RS Models - H&R Springs - Leyo Motorsport - Integrated Engineering - SuperPro - Flow Designs - Maxton Design - INA - Autotech
IE is proud to announce the best looking and highest performing air intake for the RS3 8V and TTRS 8S platforms.
To ensure the highest performance, no corners were cut or expenses spared.
A massive air filter, carbon fiber construction, large internal volume, and4-inch piping diameter ensure the engine breathes sufficiently and realizes large power gains across the entire powerband.
RS3 & TTRS DOWNPIPE FEATURES:
- Required upgrade for Stage 2 power levels
- Unrestricted 3.5" minimum size tubing
- Bolt on fitment - no hassle, modifications, or poorly fitting parts
- Constructed of high-quality 304 stainless
- Thick cast & CNC machined turbo flanges for no leaks
- High-flow metal matrix 200 cell catalytic converter
- Reliable leak-free OEM style flex section
- Y-Pipe adapter available for stock catback
CONSUMER NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT ("PRODUCT"), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.
GOING STAGE 2 ON YOUR 2.5T?
Adding an Stage 2 ECU Tune and IE Downpipe to your Audi RS3 or TTRS is the ultimate choice power adder on the stock turbo & engine! Offering an aggressive and unique motorsport sound from your 5 cylinder turbo engine with complete unrestricted air flow for unmatched maximum power. Enjoy proven performance gains and leading features such as bolt-on direct fit install, long-life construction, cast sections, and amazing sound.
STOCK DOWNPIPES ROB HORSEPOWER
Your 2.5T engine is capable of supercar level horsepower on the stock engine and turbo reliably with a Stage 2 Tune alone! However, the factory installed downpipe is designed for maximum emissions and economy, not for power. This design is riddled with small piping, harsh bends, and power sucking restrictions that limit your power gains to only Stage 1 Tune levels. In order to correct that, a true performance downpipe is required to open up the exhaust flow and allow the turbo to spin freely!
IE engineers set out to design the ultimate downpipe option for the 8V RS3 and 8S TTRS chassis by employing leading-edge development technology along with highly specialized cast manufacturing. By using cast sections this allowed our engineers to design specialized shapes into the downpipe itself that lets it conform and fit into very tight spaces while retaining it's large size and maximized flow rates. The design is so specialized that 3D scanning was used to build a digital model of the chassis to design in allowing us to build shapes down to the millimeter. This design is just not possible using traditional stainless steel pipes and bends found in most exhaust manufacturing.
Bolting this downpipe onto your Audi along with other matching bolt-ons and an IE STage 2 Tune results in up to 577 horsepower! You can take your RS3 or TTRS from a sporty driver to a power monster in a single weekend. Downpipe requires Stage 2 Tune for a complete installation.
LET THAT 5 CYLINDER ROAR!
Your RS 2.5 TFSI engine has an amazing 5 cylinder sound that all enthusiasts love. Unfortunately, much of that sound is muffled by the factory downpipe system. The cast design of your IE downpipe creates an aggressive and deep tuned sound that showcases the unique rumble from the 5 cylinder turbo engine and transforms it into an all-out howling beast!
HIGH-FLOW CATALYTIC CONVERTER
By employing a high flow metal matrix catalytic converter, horsepower loss is almost non-existent for track days and drag events while keeping unpleasant smells and increased emissions to a minimum.
IE Y-PIPE ADAPTER REQUIRED FOR STOCK CATBACK
This downpipe holds the seal of IE quality and has been manufactured to last as long as you own the vehicle and beyond. Constructed from 304 stainless steel and expertly tig welded for incredible reliability. The cast and CNC machined turbo flange is thick to prevent leaks or warping at the turbo while a quality flex section works to allow normal movement between the chassis and engine without adding strain to the downpipe.
IE's Y-Pipe Adapter Kit (sold separately) is used to adapt your IE Downpipe to a stock catback exhaust section. This high quality stainless steel cast adapter is a complete kit that will make installing our downpiep to your stock exhaust painless and easy! This part is not required if you are installing an IE Catback System.
This downpipe kit bolts-on directly to either an IE Catback or stock catback (with adapter) with no permanent modifications or alterations to the vehicle. The removal of the factory downpipe is a very long process and is only recommended to be performed by a professional. DIY is not recommended for most on this product.
CLICK HERE to view and download the install guide.
Description
This listing is for the IE POWERlink Flash Tool only.
You may also purchase this cable with IE performance tunes for your vehicle (sold separately).
POWER IN THE PALM OF YOUR HAND
Add serious power and fun to your car without popping the hood! The IE POWERlink V4 Flash Cable is the key to uploading IE engine-specific tuning upgrades to your ECU, Simply plug into your vehicles OBD2 port and launch the app on your Apple or Android phone (or Windows laptop). Enjoy serious horespower, torque gains, increased acceleraton, faster 0-60 times, optimized drivability, improved responsiveness, multiple octanes, enthusiast drive mapping and more in only minutes!
- Uploads IE Performance Tunes (sold separately)
- Apple & Android mobile flashing app (supported platforms)
- Flashes engine & transmission tunes
- Direct OBD2 vehicle flashing in only minutes
- Customizable live gauge display (Mobile)
- Octane and feature switching (varies by platform)
- Upgrade tune stages for matching hardware
- Return to 100% stock programming at anytime
- Read and Clear diagnostic codes
- Check and clear emissions monitors
- Data-logging (Windows 10+ laptop)
Would rather use a laptop? No problem! IE Flash Wizard Software allows the IE POWERlink Tool to communicate with your vehicle’s ECU to flash software tunes, upgrade, update, data log, or read/write codes on any Windows 10+ powered laptop or tablet.
DEVICE |
PORTS |
OS |
PROC. |
POWER |
RAM |
|
|
|
|
|
|
NOTE: Mobile flashing app requires an IE V4 POWERlink flashing cable and is not compatible with older V3 serial number units. Have a V3 and ready to go Mobile? Simply purchase a new V4 POWERlink to gain full mobile functionality.
TECHNOLOGY MEETS ART
Cutting edge engineering and craftsmanship have blended together at every step from design to manufacturing delivering the highest quality surface finish, fit and material brightness. The exhaust tips feature horizontal, vertical, and depth adjustments so you can perfect them exactly as you wish. Not only will your exhaust sound and perform amazing, it will look the part as well.
Sale
EASY INSTALL TO YOUR STOCK EXHAUST
IE's Y-Pipe Adapter Kit is used to adapt either your IE Downpipe to a stock catback or your IE Catback to a stock downpipe. If you are using either of our exhaust components with a stock counterpart, this Y-Pipe Kit includes everything needed to make it an easy bolt-on solution.
CAST CONSTRUCTION
Using specialized 3D scanners and software, IE engineers can design odd shapes and sizes to maximize flow and conform into tight spaces without any sacrifices. These shapes can not be manufactured reliably from traditional piping, so we use a high quality stainless steel casting to realize the design. This makes for an incredibly high quality part that will not restrict power and will create a perfect fit every time.
VEHICLE FITMENT
IE DOWNPIPE TO STOCK CATBACK EXHAUST
- AUDI - RS3 2017+ (8V) 2.5T
- AUDI - TTRS 2017+ (8S) 2.5T
IE CATBACK EXHAUST TO STOCK DOWNPIPE
- AUDI - RS3 2017+ (8V) 2.5T
Regular Price:
$369.00
Special Price
$359.00
Sale
1 kit required: TT RS 2.5L / RS3 Sportback 2.5L / B8 S4 3.0T / SQ5 Q7 3.0T / A6 A7 A8 3.0T / Touareg 3.0T / B8.5 S5 3.0T/ B8 A4 2.0T / B8.5 A4 2.0T
2 kits required: Audi 4.0T, 5.0T TFSI Audi R8 V10 / Lamborghini Gallardo / C6 Audi RS6 / 4.0T Audi S6, S7, RS6, RS7, S8
Also fits Audi Audi 09-14 2.0T B8 A4 A5 A6 Q5 TT 2.0T
Autotech is the premier manufacturer of fuel pump upgrades for the FSI engine because our kit offers the highest quality, solid engineering, and great value.
Upon installing the pump, notable increases include 5% Torque increase and an additional 10Bar of fuel rail pressure.
Our HPFP kit continues to be the benchmark that imitators strive to reach. However, Autotech’s HPFP Kit is not easily duplicated.
There are many reasons why Autotech’s Kit is superior. Here are a few:
~Each piston and cylinder in Autotech HPFP kit undergo high-precision grinding processes many times during their manufacture, ensuring that the most precise tolerances are maintained through the final step. Not the cheapest way to make them, but the best way.
~Each piston and cylinder are match-ground and serialized to ensure absolute precision and the utmost longevity.
~Autotech was the first to incorporate plasma DLC coating on HPFP components to reduce friction losses and increase performance. Others have tried to follow by adding a coating to their parts. However, the DLC process alone is not enough – it is not a cure for substandard precision – the parts must be engineered specifically for the process to take full advantage: Autotech’s are. The success we have in the field can attest to that.
~HPFP-specific mapping is now commonly available from tuners worldwide.
Tuners trust Autotech’s HPFP in their conversions and upgrades because it works, and works well.
Regular Price:
$629.00
Special Price
$609.00
Description:
Leyo Motorsport’s new RS3 8V aluminum Throttle Pipe replaces the plastic OE pipe in between the throttle body and intercooler.
For those RS3 owners that is tuning your car to the max, Leyo Motorsport Throttle Pipe for the 8V RS3 provides you with not one, but two water methanol bung. Bent aluminum piping provides smoother air flow for greater efficiency.
Simple bolt on part with no modification necessary to the vehicle.
Specifications:
-
2x WMI bung.
-
Bent aluminum piping with black powder coating.
-
Direct bolt on, no modification necessary.
- Australian owned
- 100% Fitment Guarantee
- Genuine quality brands
Suits Pre-facelift (PFL) Sportback only
Details:
The Flow Designs splitter set for the Audi RS3 8V (PFL Sportback) include front & side splitters with a pair of rear spats. These are the perfect addition to your RS3 hatch, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Splitters (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Suits Pre-facelift (PFL) Sportback only
Details:
The Flow Designs splitter set for the Audi RS3 8V (PFL Sportback) include front & side splitters with a pair of rear spats. These are the perfect addition to your RS3 hatch, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Spats (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.