Suits Pre-facelift Sportback only
Details:
Improve the aero aesthetic of your Audi S3 8V PFL Sportback with Flow Designs splitter set! The kit includes front and side splitters, Flow-Lock rear diffuser, rear spats and adjustable accessories all round. Our splitters are designed to fit perfectly to your stock bodykit and are proven as the most durable on the market.
Kit Includes:
Front winglets (pair)
2 Flow Designs stickers
Fitting kit
Material:
4.5mm thick ABS plastic
Finish:
Scratch resistant textured ABS plastic
Suits Pre-facelift Sportback only
Details:
Improve the aero aesthetic of your Audi S3 8V PFL Sportback with Flow Designs splitter set! The kit includes front and side splitters, Flow-Lock rear diffuser, rear spats and adjustable accessories all round. Our splitters are designed to fit perfectly to your stock bodykit and are proven as the most durable on the market.
Kit Includes:
Side splitter winglets (pair)
2 Flow Designs stickers
Fitting kit
Material:
4.5mm thick ABS plastic
Finish:
Scratch resistant textured ABS plastic
Suits Pre-facelift Sportback only
Details:
Improve the aero aesthetic of your Audi S3 8V PFL Sportback with Flow Designs splitter set! The kit includes front and side splitters, Flow-Lock rear diffuser, rear spats and adjustable accessories all round. Our splitters are designed to fit perfectly to your stock bodykit and are proven as the most durable on the market.
Kit Includes:
Rear spat winglets (pair)
2 Flow Designs stickers
Fitting kit
Material:
4.5mm thick ABS plastic
Finish:
Scratch resistant textured ABS plastic
This is a direct replacement for Part Number 06H 131 111. - It will fit EA888 Gen 3 engine with IHI Turbo IS20 IS38
On a 2.0L Porsche Macan, this muffler delete gave an additional 10bhp during dyno tests.
Forge has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.
DESCRIPTION Suits RS3\S3 8V Sedan models Flow Designs window vents are tested for solid construction and are superior to basic plastic window vents on the market!
PLEASE NOTE: Flow Designs window vents are compatible with any existing air defectors, snap shades and window visors.
TWO rubber trims are included:
x1 pair Performance Rubber Trim for track use and regular driving which are secure.
x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications.
Details Keep your car cabin cool during track days with the Flow Designs Australia window vents! These window vents provide much needed air circulation during warmer weather, and are a much more solid construction and safer than any standard window vents available.
Included are rubber seals to prevent any vibrations and grips tight to your S3 8V Sedan (Pre-Facelift) window so it is secure to drive with at speed. Our team has ensured the window vents do not allow for any baffling wind noise during driving.
Whether you want to keep your cabin cool during track days, or improve the aesthetic of your Audi S3 Sedan, the Flow Designs window vents are the best option currently on the market!
Rubber seals: please note the rubber seals are a very tight fit. To make the install process easier, soak the seals in warm water to create more flexibility. Once installed the rubber will shrink back for tight fitment. We have developed this tight fitment for the following benefits:
Less vibrations at speed and idle Eliminate baffling noises To protect your windows and tint from scratching
KIT INCLUDES:
S3 8V Sedan (Pre-Facelift) Window Vents (pair)
x1 pair Performance Rubber Trim for track use and regular driving and is secure. 2m in length and will need to be cut during install for perfect fitment.
x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications. 2m in length and will need to be cut during install for perfect fitment.
DESCRIPTION Window Vents Compatible For RS3 8V Sportback (PFL) model Flow Designs window vents are tested for solid construction and are superior to basic plastic window vents on the market!
PLEASE NOTE: Flow Designs window vents are compatible with any existing air defectors, snap shades and window visors.
TWO rubber trims are included:
x1 pair Performance Rubber Trim for track use and regular driving which are secure.
x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications.
Details Keep your car cabin cool during track days with the Flow Designs Australia window vents! These window vents provide much needed air circulation during warmer weather, and are a much more solid construction and safer than any standard window vents available.
Included are rubber seals to prevent any vibrations and grips tight to your RS3 8V Sportback (Pre-Facelift) window so it is secure to drive with at speed. Our team has ensured the window vents do not allow for any baffling wind noise during driving.
Whether you want to keep your cabin cool during track days, or improve the aesthetic of your Audi RS3 Sportback, the Flow Designs window vents are the best option currently on the market!
Rubber seals: please note the rubber seals are a very tight fit. To make the install process easier, soak the seals in warm water to create more flexibility. Once installed the rubber will shrink back for tight fitment. We have developed this tight fitment for the following benefits:
Less vibrations at speed and idle Eliminate baffling noises To protect your windows and tint from scratching
KIT INCLUDES:
RS3 8V Sportback (PFL) Window Vents (Pair)
x1 pair Performance Rubber Trim for track use and regular driving and is secure. 2m in length and will need to be cut during install for perfect fitment.
x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications. 2m in length and will need to be cut during install for perfect fitment.
Details:
The Flow Designs splitter set for the Audi S3 8V (PFL Sedan) include front & side splitters with a pair of rear spats and rear valance. These are the perfect addition to your S3 sedan, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Front splitter
Side splitters (pair)
Rear spats (pair)
Rear valance
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
DESCRIPTION
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler.
Product Details:
60mm aluminum piping with CTS logo
5-ply silicon coupler
Factory mounting points are used for perfect fitment
Durable black powdercoat finish
For 7-speed DSG/S-tronic transmissions only
Compatible with factory and upgraded turbos
Compatible with factory and upgraded intakes
Compatible with factory and upgraded intercoolers
Parts Included:
Upper turbo outlet silicon
Lower turbo outlet pipe
2 clamps
Installation hardware
Fitment:
2018+ VW Golf R DSG 7-speed
2019+ VW GLI DSG 7-speed
2019+ VW GTI DSG 7-speed
2018+ Audi A3 S-Tronic 7-speed
2018+ Audi S3 S-Tronic 7-speed
2018+ Audi TT, TT-S S-Tronic 7-speed
NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275