IE Performance Cold Air Intake V2 Carbon Fiber Lid (No Intake)
The all-new Integrated Engineering 2.0T Gen 3 Cold Air Intake System for the VW/Audi MQB platform has been completely reimagined and redesigned from the ground up. Featuring a new 3.5" turbo inlet pipe and heat shield that spans the entire length of the radiator inlet to support massive power gains from even large turbo and hybrid setups. New modular design allows the intake to be ran as a cost-friendly open filter intake, or upgraded with a high-gloss carbon fiber assembly further reducing hot engine bay air and adding a high-quality style to your engine bay.
Included:
High-Gloss Carbon Fiber Intake Lid
PACKAGE CONTENTS:
High-gloss Carbon Fiber Lid ONLY (THIS LISTING DOES NOT INCLUDE THE INTAKE)
Get The Complete Carbon Fiber Intake Kit (See below):
This product page is only for the carbon fiber lid. This does not include an intake. We've bundled the intake and cover for your convinience. Combine Performance and style.
With the announcement of our all-new modular MQB intake comes the end of our previous open filter and carbon fiber models. The new intake is higher performing, improved fit, and more budget-friendly for the carbon variation.
This is a direct replacement for Part Number 06H 131 111. - It will fit EA888 Gen 3 engine with IHI Turbo IS20 IS38
On a 2.0L Porsche Macan, this muffler delete gave an additional 10bhp during dyno tests.
Forge has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.
DESCRIPTION Suits RS3\S3 8V Sedan models Flow Designs window vents are tested for solid construction and are superior to basic plastic window vents on the market!
PLEASE NOTE: Flow Designs window vents are compatible with any existing air defectors, snap shades and window visors.
TWO rubber trims are included:
x1 pair Performance Rubber Trim for track use and regular driving which are secure.
x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications.
Details Keep your car cabin cool during track days with the Flow Designs Australia window vents! These window vents provide much needed air circulation during warmer weather, and are a much more solid construction and safer than any standard window vents available.
Included are rubber seals to prevent any vibrations and grips tight to your S3 8V Sedan (Pre-Facelift) window so it is secure to drive with at speed. Our team has ensured the window vents do not allow for any baffling wind noise during driving.
Whether you want to keep your cabin cool during track days, or improve the aesthetic of your Audi S3 Sedan, the Flow Designs window vents are the best option currently on the market!
Rubber seals: please note the rubber seals are a very tight fit. To make the install process easier, soak the seals in warm water to create more flexibility. Once installed the rubber will shrink back for tight fitment. We have developed this tight fitment for the following benefits:
Less vibrations at speed and idle Eliminate baffling noises To protect your windows and tint from scratching
KIT INCLUDES:
S3 8V Sedan (Pre-Facelift) Window Vents (pair)
x1 pair Performance Rubber Trim for track use and regular driving and is secure. 2m in length and will need to be cut during install for perfect fitment.
x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications. 2m in length and will need to be cut during install for perfect fitment.
DESCRIPTION Window Vents Compatible For RS3 8V Sportback (PFL) model Flow Designs window vents are tested for solid construction and are superior to basic plastic window vents on the market!
PLEASE NOTE: Flow Designs window vents are compatible with any existing air defectors, snap shades and window visors.
TWO rubber trims are included:
x1 pair Performance Rubber Trim for track use and regular driving which are secure.
x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications.
Details Keep your car cabin cool during track days with the Flow Designs Australia window vents! These window vents provide much needed air circulation during warmer weather, and are a much more solid construction and safer than any standard window vents available.
Included are rubber seals to prevent any vibrations and grips tight to your RS3 8V Sportback (Pre-Facelift) window so it is secure to drive with at speed. Our team has ensured the window vents do not allow for any baffling wind noise during driving.
Whether you want to keep your cabin cool during track days, or improve the aesthetic of your Audi RS3 Sportback, the Flow Designs window vents are the best option currently on the market!
Rubber seals: please note the rubber seals are a very tight fit. To make the install process easier, soak the seals in warm water to create more flexibility. Once installed the rubber will shrink back for tight fitment. We have developed this tight fitment for the following benefits:
Less vibrations at speed and idle Eliminate baffling noises To protect your windows and tint from scratching
KIT INCLUDES:
RS3 8V Sportback (PFL) Window Vents (Pair)
x1 pair Performance Rubber Trim for track use and regular driving and is secure. 2m in length and will need to be cut during install for perfect fitment.
x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications. 2m in length and will need to be cut during install for perfect fitment.
Details:
The Flow Designs splitter set for the Audi S3 8V (PFL Sedan) include front & side splitters with a pair of rear spats and rear valance. These are the perfect addition to your S3 sedan, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Front splitter
Side splitters (pair)
Rear spats (pair)
Rear valance
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
MK7 & MK7.5 MQB GOLF R / S3 TUNE FEATURES
Stage 1 & Stage 2 files available to match any level of bolt-on parts
Horsepower & torque gains maximized on stock engine & turbo
Switch between 91, 93, & 104 octanes at no extra cost
Stock boost control optimized for a smooth driving experience
Rev limiter increased to 7100 RPM in manual mode or with DSG flash
Quick and easy to tune your car at home
Launch control boost pressure increased for faster starts (DSG)
Increased rev limiters (transmission stock shift points remain)
Road speed limiters removed
All engine safety protocols remain for reliability and long engine life
POWERlink allows file and octane switching in less than 2 minutes
Engineered for all climates and elevations
Simple data logging for diagnosis purposes
Flash back to stock at any time
HOW TO IE TUNE YOUR 2.0T (IS38)
IE ECU Stages for your VW Golf R or Audi S3 2.0T IS38 Turbo (MQB) engine is available for stock engines or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your MK7 R or 8V S3 in a matter of minutes!
WHAT DOES THE AUDI 2.0T ECU TUNE DO?
Adding an IE Performance ECU Tune to your Golf R packs a serious punch both in performance gains and in additional features resulting in extremely competitive power that will give you the edge on the street or track. IE’s in-house calibration engineers have taken several steps to ensure you a smooth and safe operation by maintaining factory safety limits, or “fail safes”, resulting in reliability. As a final step, the software has been calibrated in test environments that ensure smooth operation in all types of climates and elevations.
AVAILABLE MK7/8V IS38 TUNES
Stage 1 is precisely calibrated to make the most of your stock hardware. Power gains are delivered smoothly across the entire powerband and many performance features have been added. Enthusiasts will have the choice between 91 & 93 fuel octanes and the ability to flash back to stock within minutes. As another added benefit, your IE Stage 1 Tune has been designed to adapt to minor bolt-on modifications, such as an intercooler or intake. Low torque and high torque files are available.
Stage 1 Low Torque recommended hardware
-IE Cold Air Intake (recommended)
Stage 1 High Torque required & recommended hardware
-IE DSG Transmission Tune (required)
-IE Cold Air Intake (recommended)
Ready to release every last ounce of power from your stock turbo 2.0T engine? The Stage 2 ECU tune takes full advantage of performance bolt-ons including downpipe, intake, and intercooler. You can install this setup in a single weekend and transform your Golf R or S3 into a true AWD monster with 432HP and 467TQ! Easily switch between free octane tunes whenever you want to add more power with your choice of 91, 93, or 104 octane files. Load Stage 2 and get ready to experience the true power monster that has been hiding under the hood of your MK7 Golf R or 8V S3.
Stage 2 required & recommended hardware
-IE Performance Downpipe (required)
-IE DSG Transmission Tune (required)
-IE Intercooler (highly recommended)
-IE Cold Air Intake (highly recommended)
AVAILABLE OCTANES
All available tune stages include various octanes at no extra cost. Using the IE POWERlink cable you can switch between octanes as needed. You can load high octane files for race day and run regular pump octane on your daily commute and save at the pump.
STAGE 1 OCTANES:
Pump 95
Pump 98
STAGE 2 OCTANES:
Pump 95
Pump 98
Race Fuel 108
EASY INSTALLATION – TUNE FROM HOME
IE’s own in-house developed POWERlink cable gives you the control to unlock your engine’s true potential from your own garage or driveway. Enjoy the freedom to quickly reflash your car’s engine control unit (ECU) or transmission control unit (TCU) with IE’s line of performance tunes. The cable simply plugs into your vehicle’s OBD-2 port delivering instant access to choose different IE Tune stages to match installed hardware, take advantage of different fuel octanes, flash back to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via logging.
The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.
The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it shouldnot be routinely removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:
T4
T5
T25
The Garrett GTX28 and GTX30 Range
Borg Warner EFR6258
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C · Continuous Use Limit: 1832°F1000°C
Exterior Surface:
· Direct Contact Limit: 1800°F/982°C · Radiant Heat Limit: 2500°F/1371°C
The Flow Designs V3 splitter set for the Audi S3 8V (PFL Sedan) include front & side splitters & your choice of rear spats or flow-lock diffuser. Adding all bolt on accessories will be the perfect addition to your S3 sedan, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
KIT INCLUDES:
S3 8V PFL Sedan Front Lip Splitter
S3 8V PFL Sedan Side Skirt Extension Splitters (Pair)
CHOOSE: S3 8V PFL Sedan Flow-Lock Rear Diffuser or Rear Pods/Spats (Pair)
WITH all accessories package: S3 8V PFL Sedan Front Lip Splitter Extensions (Pair)
WITH all accessories package: S3 8V PFL Sedan Front Lip Splitter Winglets (Pair)
WITH all accessories package: S3 8V PFL Sedan Side Skirt Extensions Winglets (Pair)
WITH all accessories package: S3 8V PFL Sedan Rear Pods/Spats Winglets (Pair)
2 Flow Designs stickers
Fitting kit
MATERIAL & FINISH:
Front lip splitter, side skirt splitters, rear diffuser, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
Hand polished satin black
Rear diffuser fins and accessories: scratch-resistant textured ABS plastic
Make your Audi S3 8V Sedan unique with the Flow Designs splitter set, complete with front & side splitters & rear spats, valanceor flow-lockdiffuser kit. Flow Designs splitters are the most durable on the market, with guaranteed perfect fitment to your S3 PFL sedan & easy installation.
S3 8V Front Lip Splitter V3 and S3 8V Front Winglets sold separately.