Suits Pre-facelift Sportback only Winglets Sold Separately Details: Improve the aero aesthetic of your Audi S3 8V PFL Sportback with Flow Designs splitter set! The kit includes front and side splitters, Flow-Lock rear diffuser, rear spats and adjustable accessories all round. Our splitters are designed to fit perfectly to your stock bodykit and are proven as the most durable on the market. Kit Includes: Rear spats (Pair) 2 Flow Designs stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Suits Pre-facelift Sportback only Details: Improve the aero aesthetic of your Audi S3 8V PFL Sportback with Flow Designs splitter set! The kit includes front and side splitters, Flow-Lock rear diffuser, rear spats and adjustable accessories all round. Our splitters are designed to fit perfectly to your stock bodykit and are proven as the most durable on the market. Kit Includes: Adjustable front extensions (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

Suits Pre-facelift Sportback only Details: Improve the aero aesthetic of your Audi S3 8V PFL Sportback with Flow Designs splitter set! The kit includes front and side splitters, Flow-Lock rear diffuser, rear spats and adjustable accessories all round. Our splitters are designed to fit perfectly to your stock bodykit and are proven as the most durable on the market. Kit Includes: Front winglets (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

Suits Pre-facelift Sportback only Details: Improve the aero aesthetic of your Audi S3 8V PFL Sportback with Flow Designs splitter set! The kit includes front and side splitters, Flow-Lock rear diffuser, rear spats and adjustable accessories all round. Our splitters are designed to fit perfectly to your stock bodykit and are proven as the most durable on the market. Kit Includes: Side splitter winglets (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

Suits Pre-facelift Sportback only Details: Improve the aero aesthetic of your Audi S3 8V PFL Sportback with Flow Designs splitter set! The kit includes front and side splitters, Flow-Lock rear diffuser, rear spats and adjustable accessories all round. Our splitters are designed to fit perfectly to your stock bodykit and are proven as the most durable on the market. Kit Includes: Rear spat winglets (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

Description

Audi - A3 & S3 (8V & 8S) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI VW - Golf / GTI / R (MK7 & MK7.5) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI

Product Description

This is a direct replacement for Part Number 06H 131 111. - It will fit EA888 Gen 3 engine with IHI Turbo IS20 IS38

On a 2.0L Porsche Macan, this muffler delete gave an additional 10bhp during dyno tests.

Forge has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.

Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles

Buy a set of 4 Now!

DESCRIPTION
Suits RS3\S3 8V Sedan models
Flow Designs window vents are tested for solid construction and are superior to basic plastic window vents on the market!

PLEASE NOTE: Flow Designs window vents are compatible with any existing air defectors, snap shades and window visors.

TWO rubber trims are included:

• x1 pair Performance Rubber Trim for track use and regular driving which are secure.
• x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications.

Details
Keep your car cabin cool during track days with the Flow Designs Australia window vents! These window vents provide much needed air circulation during warmer weather, and are a much more solid construction and safer than any standard window vents available.

Included are rubber seals to prevent any vibrations and grips tight to your S3 8V Sedan (Pre-Facelift) window so it is secure to drive with at speed. Our team has ensured the window vents do not allow for any baffling wind noise during driving.

Whether you want to keep your cabin cool during track days, or improve the aesthetic of your Audi S3 Sedan, the Flow Designs window vents are the best option currently on the market!

Rubber seals: please note the rubber seals are a very tight fit. To make the install process easier, soak the seals in warm water to create more flexibility. Once installed the rubber will shrink back for tight fitment. We have developed this tight fitment for the following benefits:

Less vibrations at speed and idle
Eliminate baffling noises
To protect your windows and tint from scratching

KIT INCLUDES:

• S3 8V Sedan (Pre-Facelift) Window Vents (pair)
• x1 pair Performance Rubber Trim for track use and regular driving and is secure. 2m in length and will need to be cut during install for perfect fitment.
• x1 pair Display Rubber Trim for quick install and removal, suitable for car shows and car meets - only for stationary visual applications. 2m in length and will need to be cut during install for perfect fitment.
• x2 Flow Designs stickers
• x1 Flow Designs air freshener
• Instructions

MATERIAL & FINISH:

• 4.5mm scratch resistant textured ABS plastic
• CNC engraved logo and features

FITS MODELS

• S3 8V Sedan PFL
• S3 8V Sedan FL
• RS3 8V Sedan PFL