Volkswagen - CTS Turbo - H&R Springs - XFORCE - VW Central - Flow Designs

The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold. The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.

XFORCE - MK6 GTI Dump Pipe & Cat Features:

-T304 Seamless Stainless Steel tubing
-T304 Stainless Steel flanges
-Fixed 200 cell cat
-100% TIG Welded
-T304 Stainless Steel 02 bungs
-Stainless Steel Clamps
-Great Sound

Proper software must be used to remove the CEL that will occur.

COMPATIBLE WITH FACTORY VW CATBACK SYSTEMS

Dual port boost tap allows for multiple boost references CNC machined from 6061 Aluminium Brass plug included

The CTS Turbo TSI Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle. Our Turbo Outlet Pipe features 2.25" diameter aluminum tube for optimized flow. The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap. The billet anodized turbo to TOP connector, 2.25" coupler and premium clamps top this package off. If you're looking for a simple bolt on modification that will optimize flow and increase power, then this part is for you.

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

Volkswagen Scirocco PFL/FL Side Splitters (Pair) Details: Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery! Kit Includes: Side splitters (pair) to suit pre-facelift and facelift Scirocco R 2 Flow Designs stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Volkswagen Scirocco PFL/FL Rear Valance (3 Piece) Details: Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery! Kit Includes: Spats (pair) Centre Valance 2 Flow Designs Stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

DESCRIPTION
Suits Scirocco R FL models

DETAILS:
Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery!

KIT INCLUDES:

• Scirocco R Rear Spats (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf

FAQ HOW IS YOUR SPLITTER SO STRONG? Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper. WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) WHAT ABOUT CARBON FIBRE? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable. USE OF ABS PLASTIC Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.