Volkswagen - CTS Turbo - IROAD - Flow Designs
Black anodized for stealth/oem type appearance
CNC machined from 6061 Aluminium
Brass plug included with manifold plug
O-rings included for great seal
Manifold plug can double as boost tap
Sale
Efficient bar and plate construction
- Direct bolt-in installation
- 4-ply silicon hoses and billet adapter to turbo outlet pipe
- High quality stainless steel clamps
- Low pressure drop
- Maintains factory mounting points
- No trimming of bumper or crash supports
- Rated for power levels in excess of 600HP
- Core dimensions: 23.00 Length x 2.00" Tall x 16.5" Height
- Cast aluminium end tanks with mounting points that are CAST into the end tank, NOT welded like inferior intercoolers
Regular Price:
$1,499.00
Special Price
$1,349.00
The CTS Turbo Golf R Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle.
Stop missing shifts and your friends will stop laughing at you.
Eliminate free-play and slop in your factory shifter bracket by replacing soft factory rubber bushings.
Keep your shifts crisp and smooth; and stay ahead of the pack!
Kit includes:
3 x shifter bracket bushings (upper and lower halfs)
This part fits the following transmissions:
MK3: 02A ONLY
MK4: 02J, 02M
MK5: 02Q
MK6: 02Q
MK7: 6MT
Audi |
TT |
MK2 (2008-2015) |
2.0 TSI |
Audi |
A3 |
8P (2009-2013) |
2.0 TSI (FWD) |
Volkswagen |
Tiguan |
(2009-2011) |
2.0 TSI |
Volkswagen |
Tiguan |
(2012+) |
2.0 TSI |
Volkswagen |
Jetta |
MK5 (2010) |
2.0 TSI |
Volkswagen |
Jetta |
MK6 Sedan (2011-2017) |
2.0T GLI |
Volkswagen |
Jetta |
MK6 Sportwagen (2010-2017) |
1.8TSI/2.0TSI |
Volkswagen
Volkswagen
|
Jetta
Golf/GTI/Rabbit
|
MK6 Sedan (2014-2017)
MK5 (2009)
|
1.8TSI/2.0T GLI
2.0 TSI
|
Volkswagen |
Golf/GTI/Rabbit |
MK6 (2010-2014) |
2.0T |
Volkswagen |
CC |
(2009+) |
2.0 TSI |
Volkswagen |
Beetle |
Beetle (2012+) |
2.0 TSI |
At CTS Turbo we are proud to announce our new air intake system for the MK5 R32. The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system. Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing. Our high quality silicones fit seamlessly with the OEM MAF flange allowing for smooth entry of cold air into the the engine providing peak power gains ranging from 9-15HP. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.
The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold.
The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.
Sale
VW Polo 6R Gti Front Splitter
Kit Includes
Splitter
2 Flow Designs Stickers
Fitting kit
Material
10mm Thick Polyethylene Composite, Bevelled edges
Finish
HAND POLISHED SATIN BLACK
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Regular Price:
$359.00
Special Price
$299.00
Sale
Dual port boost tap allows for multiple boost references
CNC machined from 6061 Aluminium
Brass plug included
Regular Price:
$89.95
Special Price
$79.95
At CTS Turbo we are proud to announce our new air intake system for the transverse 2.0T FSI EA113 VW/Audi range of vehicles.
The air scoop works in conjunction with our sealed airbox to seamlessly force cold air into our 2.75″ air intake system. Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing. Our CNC mandrel-bent aluminum intake pipe allows for smooth entry of cold air into the engine providing peak power gains ranging from 9-15WHP. By using a factory MAF position, you can be sure that fuel trims will remain perfect.
All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound.
This intake kit is designed to be compatible with our FSI EA113 BOSS kits; intake pipe features 2x 1/8″ bungs and 1x 1/2″ bung for easy installation of BOSS kits. Plugs are included.
Product Details:
- Full 2.75″ Mandrel-bent aluminum piping with black powder coating
- Compatible with CTS BOSS kits, with provisions for easy installation
- Reusable 3″ air filter with inverted cone design
- 4 Ply silicon connectors with stainless steel clamps
- Air box with rubberized trim
- Bracketry to prevent rattling under engine torquing
- Gains ranging from 9-15WHP on stock vehicle, even more if tuned!
- No CEL, no fuel trim issues
Fitment:
- MK5 VW GTI incl. Edition 35 (2006-2008)
- MK5 VW GLI (2006-2008)
- MK5 VW EOS (2006-2008)
- MK6 VW Golf R (2012-2013)
- MK2 SEAT Leon (2006-2009)
- MK2 SEAT Cupra R (2006-2012)
- B6 VW Passat (2006-2010)
- 8P Audi S3 (2006-2013)