Volkswagen

Product Description

Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit (FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi.

This valve represents the latest evolution of part number FMFSITVR, The result is a full replacement recirculating valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement atmospheric valve option, the FMFSITVR and FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak.

Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location.

The FMFSITVR valve has a much shorter overall installed height, which enables fitment of this recirculating valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products.

Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB

 

In The Box:
1 x FMFSITVR Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x PCV Adaptor Kit
1 x Blue Spring (Uprated)
10 x Cable Ties
1 x 2000mm Length of 4mm Vac Hose
1 x Instruction Booklet
1 x Forge Keyring and Sticker

If you are unsure if this product is suitable for your application, please contact us.

Eibach PRO-KIT Performance Springs World‘s leading Performance Suspension Spring System

Eibach Sportline Sport Performance Springs Pure Sport Suspension Springs and Appearance

Eibach Sportline Sport Performance Springs Pure Sport Suspension Springs and Appearance

Eibach PRO-KIT Performance Springs World‘s leading Performance Suspension Spring System

Eibach Sportline Sport Performance Springs Pure Sport Suspension Springs and Appearance

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

• Ball for low friction and long life
• Elminate sway bar flex for consistent handling
• Spanner provision for on-car adjustment
• Suitable for application on lowered or raised vehicles

Eibach PRO-KIT Performance Springs World‘s leading Performance Suspension Spring System

Description:

Eibach performance lowering springs Pro-Kit

The absolute top seller. The number one choice of automotive enthusiasts worldwide. The Eibach Pro-Kit springs are the ideal solution for your series vehicle . The proven spring system maximizes the handling of your vehicle and ensures a sporty look .

The Pro-Kit lowers the center of gravity of your vehicle and reduces the rebound during accelerating, reduces the tendency of the body to roll when cornering and the dipping when braking drives.

The Eibach Pro-Kit in combination with appropriate wheels and tires is the guarantee of success for optimal performance. The lowering with Eibach Pro-Kit springs reduces the unnecessary distance between the tires and the wheelhouse and gives the vehicle a sporty look.

Eibach Pro-Kits are designed by Eibach's chassis engineers and test experts designed to deliver a combination of sporty looks and performance without sacrificing safety or ride quality.

A leading performance suspension spring system worldwide
tested for the combination with stock and retrofit dampers
First step towards a complete sport suspension system
Lower center of gravity – lowers vehicle up to 40 mm (depending on the vehicle)
Spring design for traction and attraction
Progressive spring design
Performance Handling
ABE or parts certificate

Compatible Vehicles:

Manufacturer	Model	Type	Lowering in mm (FA/RA)	Axle load (FA/RA)
VW	CC B7 (358)	2.0 TDI	25/20	-> 1170Kg/ -> 1050kg
VW	CC B7 (358)	2.0 TFSI	25/20	-> 1170Kg/ -> 1050kg
VW	CC B7 (358)	2.0 TSI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 BlueTDI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 TDI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 TFSI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 TSI	25/20	-> 1170Kg/ -> 1050kg