Currently Shopping by
- Custom Stock Status: Remove This Item In stock
-
Brands:
Flow Designs
Forge Motorsports
Integrated Engineering
P3 Cars
VW Central
Whiteline
XFORCE
- Filter By cosmetics
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Volkswagen - Forge Motorsports - Integrated Engineering - XFORCE - P3 Cars - VW Central - Flow Designs - Whiteline
Volkswagen MK7.5 Tail Light Retrofit Harness for MK7.5 Golf (RHD)
Designed and produced by our Sydney associated workshop primarily for Australian delivered vehicles.
The harness will come with how to guides, videos and coding instructions.
Coding will be required through any recognised program VCDS or OBD11.
If your vehicle has any coding done that affects the tail lights or any other physical modification to the tail lights wiring this harness will not work. This harness requires the car to be 100% stock with the tail lights. If in doubt please send us an email.
Regular Price: $275.00
Special Price $255.00
MQB to PQ Harness Adapter for VW RCD330/RCD340 Radio
This harness is designed to be used for vehicles that have a factory fitted MQB radio and wish to install a VW RCD330/RCD340 Radio. Simply plug in this harness directly into the back of your RCD330G headunit, followed by your vehicles factory quadlock. Compatible with: VW Caddy (2016+) VW Transporter (2016+) If you are unsure whether your vehicle requires this harness, please contact us prior to purchase. Radio models: - RCD330 - RCD340Regular Price: $79.00
Special Price $69.00
IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style
DESCRIPTION
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.Most Stage 2+ software tunes are compatible with this kit.
Product Details
- Made in house at CTS Turbo in Canada
- Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
- OEM-spec honing and tolerances
- Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
- Nitride coated for long-lasting OEM looking finish
- Includes belt and bolts required for install
- Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
- 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
- 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
- Late Audi Q7 with 3.0T SUPERCHARGED engine
$359.00
XFORCE - Audi RS3 PFL 8V 4" 200 CEL Cat Downpipe & Catless Tuning Pipe
Introducing the NEW XFORCE Downpipe offering to suit Audi PFL RS3 8V 09/2015-12/2016.
Experience more performance from your Audi RS3 by bolting on our XFORCE Performance Exhaust Turbo Downpipe.
The turbo downpipe stainless steel pipe kit which is equipped with a high-flow cat to achieve maximum flow. Your Audi RS3 will come alive and demand attention!
Over 20 years of exhaust development and technical expertise have gone into creating the ultimate bolt-on performance downpipes, providing power increases throughout the rev range.Dump-Pipe & Cat Kit
-
Features
- Stainless Steel
- Non Polished 3.5″ – 3″ pipe work
- Stainless Steel Flex Bellow
- 200 Cell Metallic High Flow Cat
- Additional Tuning pipe
- 3″ to Twin OEM size adaptor pipe
- Fitting kit supplied
Part No: ESRS315KITB Vehicle Model: RS3 Material: 304 Stainless Steel
COMPATIBLE
- AUDI RS3 8V PFL (2015-2016)
Regular Price: $1,350.00
Special Price $1,189.00
-
XFORCE - Toyota Yaris GR (2021+) - Polished Stainless Steel Varex Cat-Back System
3" Varex cat back system
Features
Transform the driving experience of your Toyota GR Yaris with our ALL-NEW VAREX Valve equipped exhaust system; engineered to take your GR to the next level.
through our extensive development and testing process we’ve been able to strike the perfect balance between sound
and performance.Creating something very special for the giant killing Yaris GR.
The system uses our cutting-edge patented VAREX Valve technology, allowing you to switch from Street to Race mode using the remote control or optional SmartBox system which offers smartphone app control and delivers unrivalled customisation.- 3″ cat back system in brushed 304 stainless steel
- Two Centre hot dog resonators with anti-resonance chamber
- Varex rear muffler with twin 2.5″ outlets
- Polished 4″ angle cut tips
Part No: ESTY21VKCS Vehicle Model: YARIS Diameter [in]: 3 Material: 304 Stainless Steel Regular Price: $1,895.00
Special Price $1,699.00
IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
Your car deserves the performance, sound, and quality from an intake system that reflects the Audi S trim as a true performance machine. IE's engineers took a "no expense spared" approach to design the ultimate intake system solution that delivers on looks, fit, and most importantly -power!
PERFORMANCE TESTING
No part of this intake design is by accident, every inch is engineered and tested for performance first. Countless revisions undergo dyno testing, flow bench, and real-world use to maximize potential. As a result of this testing, the massive air filter, built-in velocity stack, large internal volume, ram air inlet, and bottom plate louvers ensure the intake supplies more than enough airflow across the entire powerband for any ECU tune or turbo setup.
CARBON FIBER - MORE THAN STYLE POINTS
In order to maximize airflow, a large internal volume is required to support the necessary amount of flow for the engine. Carbon fiber construction allows our engineers to create complex shapes and angles that just can not be achieved with sheet metal bends. This design style utilizes every millimeter available in oddly shaped modern engine bays for a very large air supply and smooth delivery. The finished product results in a performance design with a stylized high-end look for your engine bay.
UNIQUE SOUND
You drive a flagship S model Audi with a 6 cylinder turbocharged engine -make it sound like one!
The factory intake kills any and all engine sound to meet requirements for everything but fun. By upgrading to an IE intake system, you are taking full advantage of a performance design including the turbocharger spool, engine throttle, and diverter valve sounds that come along with it. The unique velocity stack and bottom louver design create a tuned engine note that sounds classy, yet powerful at the same time. This level of sound is not heard through other brand closed box intakes and is a much more refined sound than found with open element style intakes. Get ready to sing the song of power!
SEAMLESS DESIGN
The only fully carbon 1-piece intake design on the market offers more than a fantastic look alone. This reduces the chances of air leaks from an airbox/air duct joint, finicky installs, rubbing noises, or parts working loose over time while also providing an easier install. Furthermore, this is a complete all-inclusive intake system that does not require any additional parts sold separately to complete the intake.
EASY INSTALLATION
This Intake fits Audi B9 S4 & S5 3.0T V6 Turbocharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allow for natural engine movement which keeps intake components from getting damaged.
HIGH-FLOW VELOCITY STACK
By incorporating a professional motorsport style velocity stack into the airbox design, airflow is channeled from the large internal airbox volume into the turbocharger as quickly as possible. The bellmouth shape creates a very high inertia flow from the massive filter with very low drag or power-robbing turbulence.
MULTIPLE PRESSURE ZONES
Engineered to support any power level, the intake takes advantage of multiple air supply avenues. The front large air inlet receives outside high-pressure flow from the front of the grille and acts as a ram air design for the majority of the air supply. Additionally, the bottom plate louvers pull extra required air as needed from the low-pressure zone under the intake. These dual zones provide an unrestricted supply of air across the entire filter and ensure your intake will never be a power limiter for even the most extreme builds.
PRECISION FIT
To ensure a perfect fit, 3D scanning tools are used to create a digital duplicate of the vehicle's engine bay, grille, bumper, and hood. This provides an incredibly high-resolution environment to reverse engineer and prototype the intake design. This not only allow engineers to take advantage of all available room but also results in a perfect and extremely high-end install.
QUALITY COMPONENTS
No flimsy parts or quality sacrifices found here! Only the best materials and design features were used for a top-tier look, fit, function, and long-life reliability.
SPECIFICATIONS
- High-gloss true carbon fiber construction
- Factory style mounts
- Stainless hardware
- Multi-ply silicone with stop-flat edges
- High-quality clamps
- Powder-coated aluminum bottom plate
- Stainless laser-etched logo plate
- 5" pleated cotton filter
COMPATIBILITY
- 2017-On Audi S4 B9 3.0T Turbocharged
- 2017-On Audi S5 B9 3.0T Turbocharged
Regular Price: $1,894.00
Special Price $1,749.00
PQ to MQB Harness Adapter for Genuine VW Composition Media or Discover Media Radio
This harness is designed to be used for vehicles that have a factory fitted MQB harness and wish to install a Genuine VW Composition Media or Genuine VW Discover Media Radio Unit.
Simply plug in this harness directly into the back of your quad lock harness and then into your Genuine VW MIB 2 Composition Media or Discover Media radio unit.If you are unsure whether your vehicle requires this harness, please contact us prior to purchase.
Compatible Radio models:
Regular Price: $79.00
Special Price $69.00
IE Harsh Climate 5" Oiled Air Filter & Sock Upgrade Kit
EXPLORE WITH CONFIDENCE
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
KIT DETAILS
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
- 1X IE oiled 8 pleat density performance 5" filter
- 1X IE pre-filter intake sock
- 1X Air filter worm clamp
RECHARGING
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
COMPATIBLE INTAKES
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
- IEINCI11 - IE MQB 2.0T/1.8T Gen 3 Cold Air Intake
- IEINCK3 - IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
- IEINCG2A - IE Audi 3.0T Cold Air Intake For B8/B8.5 S4 & B8.5 S5
- IEINCN1 - IE Audi 3.0T Cold Air Intake For C7 A6 & A7
- IEINSG1 - IE Audi 3.0T Cold Air Intake For 8R SQ5 & Q5
- IEINCG1 - IE Audi 2.0T TSI Cold Air Intake For B8/B8.5 A4 & A5
- IEINCK1 - IE Audi B9 A4 & A5 Cold Air Intake
- IEINCW1 - IE Cold Air Intake System For VW MQB Tiguan 2.0T
- IEINCV1 - IE Performance Intake System For VW Atlas 2.0T
- IEINCC2 - IE 2.0T TSI Cold Air Intake For VW MK5, MK6 GTI, Jetta, CC & 8P A3
- IEINCB4 - IE 2.0T FSI Cold Air Intake Kit For MK6 Golf R, A3, MK5 GTI, Jetta
- IEINCC4 - IE Gen 3 2.0T/1.8T Cold Air Intake For 2013-2018 MK6 Jetta & GLI
- IEINCJ1 - IE Carbon Fiber Intake For Audi TTS MK2
- IEINCI4 - IE VW 1.4T Cold Air Intake For VW MK6 Jetta
$129.00
Flow Designs - MK8 Golf R Full Lip Splitter Set
DESCRIPTION
ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE
To celebrate the upcoming release of the latest Flow Designs Edition One kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!
If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.
Suits MK8 Golf R models
INSTALL DOES NOT REQUIRE BUMPER REMOVALPACKAGE PRICE FOR THIS SET INCLUDES:
MK8 Golf R chassis mounted front lip splitter
MK8 Golf R side skirt splitters (pair)
MK8 Golf R rear spats (pair)
MK8 Golf R Flow-Lock rear diffuser
WITH or WITHOUT accessories (front extensions, front winglets, side winglets, rear winglets)
ADD: Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount if desired.
DETAILS:
The MK8 Golf R splitter set includes front lip splitter, side skirt splitters, Flow-Lock rear diffuser, rear spats, full accessories range (front extensions and winglets all round). Further customise your MK8 with our rear window vents &/or fire extinguisher bracket/mount if desired. Pre-pressed brass thread fittings allow for the installation of our bolt on accessories range.The MK8 Golf R body kit range shares the same durability and technology as our renowned WRX, Golf GTI and Focus RS line up which is trusted by car enthusiasts worldwide.
All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our lip splitter stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES:
MK8 Golf R front lip splitter
MK8 Golf R Chassis Mounts x2
MK8 Golf R side skirt splitters (pair)
MK8 Golf R rear spats (pair)
MK8 Golf R Flow-Lock rear diffuser
WITH all accessories package: MK8 Golf R adjustable front extensions (pair)
WITH all accessories package: MK8 Golf R adjustable front winglets (pair)
WITH all accessories package: MK8 Golf R adjustable side winglets (pair)
WITH all accessories package: MK8 Golf R adjustable rear winglets (pair)
x2 Flow Designs stickers
x1 Flow Designs air freshener
Fitting kit with black stainless hardware
MATERIAL & FINISH:
Front lip splitter, side skirt splitters, rear valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges, impact-resistant
Chassis mounts: Powder coated stainless steel
Hand polished satin black
Flow-Lock fins: scratch resistant textured ABS plastic
Window Vents: 4.5mm scratch resistant textured ABS plastic, CNC engraved logo and features
Fire Extinguisher Bracket/Mount: 3mm Stainless Steel, Powder-coated Texture BlackRegular Price: $1,725.00
Special Price $1,329.00
Drive Mode Activation for VAREX Smartbox
OEM Drive Mode Factory Control 3 pin PWM to VAREX Smartbox.
Are you looking to add a little more control and customization to your Varex equipped exhaust system? Look no further! We are excited to announce the release of our Drive Mode feature for our Varex Smartbox controller unit.
This feature will allow you to control your Varex equipped exhaust system from the OEM Drive Mode vehicle controls, making it easier and more convenient than ever before.$30.00
SAFE & SECURE SHOPPING
