ECS Manifold Port Boost Tap Kit

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

$99.00

Out of stock

IE POWERlink Flash Cable | Direct-Port ECU Tune Tool

Description

This listing is for the IE POWERlink Flash Tool only.
You may also purchase this cable with IE performance tunes for your vehicle (sold separately).

POWER IN THE PALM OF YOUR HAND

Add serious power and fun to your car without popping the hood! The IE POWERlink V4 Flash Cable is the key to uploading IE engine-specific tuning upgrades to your ECU, Simply plug into your vehicles OBD2 port and launch the app on your Apple or Android phone (or Windows laptop). Enjoy serious horespower, torque gains, increased acceleraton, faster 0-60 times, optimized drivability, improved responsiveness, multiple octanes, enthusiast drive mapping and more in only minutes!

LEADING FEATURES

Uploads IE Performance Tunes (sold separately)
Apple & Android mobile flashing app (supported platforms)
Flashes engine & transmission tunes
Direct OBD2 vehicle flashing in only minutes
Customizable live gauge display (Mobile)
Octane and feature switching (varies by platform)
Upgrade tune stages for matching hardware
Return to 100% stock programming at anytime
Read and Clear diagnostic codes
Check and clear emissions monitors
Data-logging (Windows 10+ laptop)

FLASH WITH A LAPTOP

Would rather use a laptop? No problem! IE Flash Wizard Software allows the IE POWERlink Tool to communicate with your vehicle’s ECU to flash software tunes, upgrade, update, data log, or read/write codes on any Windows 10+ powered laptop or tablet.

DEVICE	PORTS	OS	PROC.	POWER	RAM
Laptop or Tablet	Wifi & USB	Windows 10 or newer	32 or 64 bit	1.0ghz or greater	4GB or greater

NOTE: Mobile flashing app requires an IE V4 POWERlink flashing cable and is not compatible with older V3 serial number units. Have a V3 and ready to go Mobile? Simply purchase a new V4 POWERlink to gain full mobile functionality.

$299.00

Add to Cart

VW Golf MK6 Sequential Mirror Light LED Dyna Blink Style

Sale

VW Golf MK6 Sequential Mirror Light LED Dyna Blink Style

MODERN UPDATED STYLING – ERROR FREE – NO CODING

Specifically for VW Golf Mk6

Regular Price: $149.00

Special Price $99.00

Out of stock

Supernova - VW Golf Mk6 Sequential Red LED Tail Lights | Fits MK6 (2009-2013) - V5.2 - 2022 Release

Sale

Supernova - VW Golf Mk6 Sequential Red LED Tail Lights | Fits MK6 (2009-2013) - V5.2 - 2022 Release

NO CODING REQUIRED

ERROR FREE. FITS ALL MK6 MODELS, WORLDWIDE.

VERSION 5.1, GOING ROGUE.

After years of request we delivered the first MK6 sequential tail lights to market in 2018. Working directly with a well established manufacturer we specified a great product and obtained southern hemisphere distribution rights. Despite the popularity we were not 100% satisfied with the quality. Today we go rogue, bringing an entirely new mould with edge to edge turn signal illumination and many small improvements to deliver the best version yet.

V5 brings a new ground up design, making it the largest improvement to date.

Deeper amber indicator/turn signal
Dual Reverse, Dual Fog Light, RHD + LHD support -V5.1 update
Wider indicator/turn signal illumination – edge to edge
Reduced moisture ingress
Stronger electrical sockets
Solid metal canbus decoder – improved thermal cooling, rock solid design
Improved weather sealing – Harsh Aussie climate tested, Snow to 45cº
TREND SETTING.

Buy with confidence and get the latest variant. Beware of off the shelf V1.0 non edge to edge designs.

DETAILS

INSTALLATION

1. FIT TAIL LIGHTS 10-15 MINUTES

2. ENABLE INNER TAIL LIGHT INDICATOR (OPTIONAL) 30-60 MINUTES APPROX

SPECIFICATIONS

LENS	OEM Style - RED -PMMA
REVERSE	LED White (passenger side for RHD, both sides for LHD)
FOG	LED Red (drivers side, N/A for LHD)
INDICATOR	4 Pcs Dynamic - LED Amber
WARRANTY	12 Months

Regular Price: $599.00

Special Price $519.00

Out of stock

Supernova - VW Golf Mk6 Midnight Black Sequential LED Tail Lights V5.2 2022 Release | Fits MK6 (2009-2013)

Sale

Supernova - VW Golf Mk6 Midnight Black Sequential LED Tail Lights V5.2 2022 Release | Fits MK6 (2009-2013)

1Review(s)

MIDNIGHT BLACK - BRIGHTER THAN OEM.

LIGHT OUTPUT EXCEEDS OEM BRIGHTNESS IS ACHIEVED BY DARKENING INTERNALS AND MAINTAINING A CLEAR OUTER LENS FOR MAXIMUM LIGHT TRANSMISSION.

NEW VARIANT UPDATE - V5.1

-Wider Indicator Illumination

-Deeper Amber Indicator Colour

-Dual Fog and Reverse light function

-Increased Diffusion; More Consistent, Less Harsh Indicator Brightness

If we're being honest, the stock Golf 6 halogen tail lights leave a lot to be desired in terms of aesthetics. Get a defined and modern look with these easy install, no coding required LED tail lights for your golf 6.

Features

No Coding Required
Fits all Golf 6 models - TSI/TDI/R/GTI/GTD
100% LED - Standard LED tail lights utilise Halogen globes for Reverse - Fog - Turn Signal
Super Bright Sequential turn signal functions on inner + outer tail light
Right Hand Drive and Left Hand Drive configurable
Dual Reverse, Dual Fog Light

(red variant pictured for illustration. This listing is for black style)

VERSION 5.0, GOING ROGUE.

After years of request we delivered the first MK6 sequential tail lights to market in 2018. Working directly with a well established manufacturer we specified a great product and obtained southern hemisphere distribution rights. Despite the popularity we were not 100% satisfied with the quality. Today we bring an entirely new mould with edge to edge turn signal illumination and many small improvements to deliver the best version yet.

V5.0 brings a new ground up design, making it the largest improvement to date

Deeper amber indicator/turn signal
Wider indicator/turn signal illumination – edge to edge
Reduced moisture ingress
Stronger electrical sockets
Solid metal canbus decoder – improved thermal cooling, rock solid design
Improved weather sealing – Harsh Aussie climate tested, Snow to 45cº

TREND SETTING.

Buy with confidence with the largest Mk6 tail light stockist.
WHAT'S INCLUDED
- LED Tail Lights – Black (4)
- Canbus decoders (4)
- Socket adaptors to fit halogen tail light equipped cars (4)
- Inner tail light indicator bridge wire (2)
SPECIFICATIONS

LENS Clear -PMMA, Black internals.

REVERSE Dual White LED (V5.1 Update)

FOG Dual Red LED (V5.1 Update)

INDICATOR 4 Pcs Dynamic - LED Amber

WARRANTY 12 Months

Regular Price: $599.00

Special Price $469.00

Out of stock

VW Golf Mk6 Sequential LED Tail Lights - Limited Edition Midnight Red - V5.2 - 2022 Release

Sale

VW Golf Mk6 Sequential LED Tail Lights - Limited Edition Midnight Red - V5.2 - 2022 Release

2Review(s)

WHAT'S INCLUDED LED Tail Lights – Black (4) Canbus decoders (4) Socket adaptors to fit halogen tail light equipped cars (4) Inner tail light indicator bridge wire (2)

Regular Price: $599.00

Special Price $459.00

Add to Cart

XFORCE - VW Golf R MK6 Cat Back System with Varex Rear Muffler

Sale

XFORCE - VW Golf R MK6 Cat Back System with Varex Rear Muffler

1Review(s)

FEATURES; Polished stainless steel 3″ pipe work Straight through sports muffler Varex Muffler with twin outlet Twin 4″ tips

Regular Price: $1,699.00

Special Price $1,495.00

Add to Cart

XFORCE - VW GOLF MK6 R / AUDI S3 8P - 3" STAINLESS STEEL DUMP PIPE & CAT

Sale

XFORCE - VW GOLF MK6 R / AUDI S3 8P - 3" STAINLESS STEEL DUMP PIPE & CAT

Description

3.5″ to 3" Dump pipe, to OEM cat back with 100 cell metallic cat in Stainless Steel

Features

This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.

The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential.

Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.

3.5″ dump pipe reduced to 3″
Flex bellows before hanger
100 cell high flow performance catalytic converter
Designed to fit to factory cat back systems
Requires ECU tuning

Fits the following;

Audi 8P S3
Audi 8P A3 2.0T
Golf MK6 R

Part No:	ES-VW07-KITB
Vehicle Model:	A3, GOLF R, S3
Diameter [in]:	3
Material:	Stainless Steel

Regular Price: $1,000.00

Special Price $880.00

Add to Cart

XFORCE - VW Golf R MK6 R Full Turbo Back Exhaust System with Varex Rear Muffler

Sale

XFORCE - VW Golf R MK6 R Full Turbo Back Exhaust System with Varex Rear Muffler

FEATURES; Polished stainless steel 3″ pipe work Straight through sports muffler Varex Muffler with twin outlet Twin 4″ tips DUMP-PIPE & CAT KIT 3" Stainless Steel Dump Pipe and 100-cel Cat

Regular Price: $2,600.00

Special Price $2,288.00

Add to Cart

XFORCE - VW GOLF R MK6 (10/2009-08/2013) Turbo Exhaust Downpipe With Hi-Flow Racing Catalytic Converter (Fit XFORCE Cat-back System Only)

Sale

XFORCE - VW GOLF R MK6 (10/2009-08/2013) Turbo Exhaust Downpipe With Hi-Flow Racing Catalytic Converter (Fit XFORCE Cat-back System Only)

Description

3.5″ to 3" Dump pipe with 100 cell metallic cat in stainless steel fits to Xforce cat back system

Features

This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.

The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential. While exclusively working with an Xforce cat back system.

Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.

3.5″ dump pipe reducing to 3″
Flex bellows before hanger
100 cell high flow cat
3″ connector pipe with resonator
Fits to Xforce cat back system

Regular Price: $1,100.00

Special Price $970.00

Add to Cart

LENS	Clear -PMMA, Black internals.
REVERSE	Dual White LED (V5.1 Update)
FOG	Dual Red LED (V5.1 Update)
INDICATOR	4 Pcs Dynamic - LED Amber
WARRANTY	12 Months

Volkswagen

Description

This listing is for the IE POWERlink Flash Tool only.You may also purchase this cable with IE performance tunes for your vehicle (sold separately).

POWER IN THE PALM OF YOUR HAND

LEADING FEATURES

FLASH WITH A LAPTOP

MODERN UPDATED STYLING – ERROR FREE – NO CODING

NO CODING REQUIRED

VERSION 5.1, GOING ROGUE.

TREND SETTING.

DETAILS

SPECIFICATIONS

MIDNIGHT BLACK - BRIGHTER THAN OEM.

NEW VARIANT UPDATE - V5.1

If we're being honest, the stock Golf 6 halogen tail lights leave a lot to be desired in terms of aesthetics. Get a defined and modern look with these easy install, no coding required LED tail lights for your golf 6.

Features

VERSION 5.0, GOING ROGUE.

TREND SETTING.

WHAT'S INCLUDED

SPECIFICATIONS

Description

Features

Description

Features

This listing is for the IE POWERlink Flash Tool only.
You may also purchase this cable with IE performance tunes for your vehicle (sold separately).