Volkswagen - New South Performance - H&R Springs - Integrated Engineering - Flow Designs

REQUIRES AFTERMARKET INTAKE

Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes. 
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.

TURBO INLET PIPE FEATURES

• Greatly improves air-flow to turbocharger
• Constant high-flow inner diameter
• Easy install, no modifications necessary
• Long life cast aluminum alloy
• In-house CNC machined for perfect fitment
• No leak o ring seal to turbocharger 
• Outflows stock inlet by 110CFM

IS YOUR STOCK INLET ROBBING POWER?

The factory installed plastic turbo inlet found installed on your VW or Audi Gen 3 1.8T or 2.0T TSI engine is adequate enough for stock cars with factory hardware and ECU calibrations. However, the necked down design becomes a major flow restriction when ran with power upgrades such as cold air intakes, intercoolers, downpipes, and ECU upgrades. 

UPGRADE YOUR TURBO INLET PIPE

The IE Turbo Inlet Pipe helps you to get the most out of your IS38 or IS20 turbo and power upgrades by removing the factory flow restriction. The cast aluminum design allows for a constant diameter elbow increasing efficiency from the intake to the turbo without the bottleneck design of the factory unit.

HORSEPOWER RESULTS

Dyno graph tested on a 2019 GTI with Stage 2 hardware & software on 93 octane

EASY INSTALLATION

Your new turbo inlet pipe has been in-house CNC machined and includes all required hardware to allow for a perfect and easy installation. View and download the install guide here (coming soon).

REQUIRES AFTERMARKET INTAKE

Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes. 
Does not work with the DV+ Diverter Valve or Diverter Valve spacers. 

VEHICLE APPLICATIONS

• Audi - A3 2015+ 8V 1.8T & 2.0T engines
• Audi - S3 2015+ 8V 2.0T engine
• Audi - TT 2016+ 8S 2.0T engine
• Audi - TTS 2016+ 8S 2.0T engine
• VW - Golf R 2015+ MK7 2.0T engine
• VW - GTI 2015+ MK7 2.0T engine
• VW - Golf/Alltrak 2015+ MK7 1.8T & 2.0T
• VW - Passat 2013+ B8 1.8T & 2.0T (EA888 Gen 3) engines
• VW - Tiguan 5N 2017+ 2.0T (EA888 Gen 3) engine

Volkswagen Scirocco PFL/FL Side Splitters (Pair) Details: Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery! Kit Includes: Side splitters (pair) to suit pre-facelift and facelift Scirocco R 2 Flow Designs stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Volkswagen Scirocco PFL/FL Rear Valance (3 Piece) Details: Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery! Kit Includes: Spats (pair) Centre Valance 2 Flow Designs Stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

DESCRIPTION
Suits Scirocco R FL models

DETAILS:
Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery!

KIT INCLUDES:

• Scirocco R Rear Spats (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf

FAQ HOW IS YOUR SPLITTER SO STRONG? Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper. WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) WHAT ABOUT CARBON FIBRE? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable. USE OF ABS PLASTIC Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

DETAILS:

Please note you are receiving a special price when you purchase the MK5 GTI complete splitter set.

The Flow Designs splitter set is the best exterior mod for your VW MK5 Golf GTI With front & side splitters, rear spats and if you choose to, can include Window Vents and/or a MK5 GTI & R32 Spoiler Extension. Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done in our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

---

MK5 GOLF GTI LIP SPLITTER KIT INCLUDES:

• MK5 GTI front splitter 
• MK5 GTI side Splitters (Pair)
• MK5 GTI rear spats (Pair)
• 2 Flow Designs stickers
• Fitting kit

MK5 GOLF GTI LIP SPLITTER KIT (WITH SPOILER EXTENSION) INCLUDES:

• MK5 GTI front splitter 
• MK5 GTI side Splitters (Pair)
• MK5 GTI rear spats (Pair)
• MK5 GTI / R32 Spoiler Extension
• 2 Flow Designs stickers
• Fitting kit

MK5 GOLF GTI LIP SPLITTER KIT (WITH WINDOW VENTS) INCLUDES:

• MK5 GTI front splitter 
• MK5 GTI side Splitters (Pair)
• MK5 GTI rear spats (Pair)
• MK5 GTI window vents (Pair)
• 2 Flow Designs stickers
• Fitting kit

MK5 GOLF GTI LIP SPLITTER KIT (WITH SPOILER EXTENSION & WINDOW VENTS) INCLUDES:

• MK5 GTI front splitter 
• MK5 GTI side Splitters (Pair)
• MK5 GTI rear spats (Pair)
• MK5 GTI window vents (Pair)
• MK5 GTI / R32 Spoiler Extension
• 2 Flow Designs stickers
• Fitting kit

MK5 GOLF R32 LIP SPLITTER KIT MATERIAL & FINISH:

• Front splitter, side splitter, rear spats, window vents & spoiler extension: 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black
• CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.

DETAILS:

Please note you are receiving a special price when you purchase the MK5 R32 complete splitter set.

The Flow Designs splitter set is the best exterior mod for your VW MK5 Golf R32 With front & side splitters, rear spats and if you choose to, can include Window Vents and/or a MK5 GTI & R32 Spoiler Extension. Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done in our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

---

MK5 GOLF R32 LIP SPLITTER KIT INCLUDES:

• MK5 R32 front splitter 
• MK5 R32 side Splitters (Pair)
• MK5 R32 rear spats (Pair)
• 2 Flow Designs stickers
• Fitting kit

MK5 GOLF R32 LIP SPLITTER KIT (WITH SPOILER EXTENSION) INCLUDES:

• MK5 R32 front splitter 
• MK5 R32 side Splitters (Pair)
• MK5 R32 rear spats (Pair)
• MK5 GTI / R32 Spoiler Extension
• 2 Flow Designs stickers
• Fitting kit

MK5 GOLF R32 LIP SPLITTER KIT (WITH WINDOW VENTS) INCLUDES:

• MK5 R32 front splitter 
• MK5 R32 side Splitters (Pair)
• MK5 R32 rear spats (Pair)
• MK5 R32 window vents (Pair)
• 2 Flow Designs stickers
• Fitting kit

MK5 GOLF R32 LIP SPLITTER KIT (WITH SPOILER EXTENSION & WINDOW VENTS) INCLUDES:

• MK5 R32 front splitter 
• MK5 R32 side Splitters (Pair)
• MK5 R32 rear spats (Pair)
• MK5 R32 window vents (Pair)
• MK5 GTI / R32 Spoiler Extension
• 2 Flow Designs stickers
• Fitting kit

MK5 GOLF R32 LIP SPLITTER KIT MATERIAL & FINISH:

• Front splitter, side splitter, rear spats, window vents & spoiler extension: 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black
• CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.