H&R Sport Springs - Volkswagen Golf R Wagon (MK7) Sport Spring kits are H&R’s number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle’s suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle. H&R Special Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All H&R springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. H&R Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving H&R’s ISO9001 certified production facility in Germany. Features: Lowers the center of gravity Reduces body roll Reduces wheel gap Lower wind resistance Front Drop: 25mm Rear Drop: 25mm

Description

We are proud to release the new our CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5.  As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump).  While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system.  CTS has developed a fully integrated fueling system, which utilizes a Walbro 525LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 600HP.  If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.

NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.

Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.

Product Details:

– Genuine Walbro High Output in-tank 525LPH HELLCAT E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners

 

Fitment:

• 2015 – current VW Golf (incl Sportwagen and AllTrack)
• 2015 – current VW GTI (incl Rabbit)
• 2015 – current VW Golf R
• 2015 – current Audi A3
• 2015 – current Audi S3
• 2017 – current Audi A4/A5/AllRoad

The following VW fuel pumps are compatible: 5Q0919051BK, 5Q0919051BM

DESCRIPTION

Suits USDM MK7 Golf R models

INSTALL REQUIRES BUMPER REMOVAL

---

IMPORTANT NOTICE: Please ensure the correct chassis mount is selected prior to checkout as per your vehicles country of build. Shipping fees to replace mounts will be incurred by the customer - please contact us for more information.

---

DETAILS:

Start building the aggressive aesthetic of your MK7 Golf R with our Chassis mounted front lip splitter range, renowned for their durability under all driving conditions. Further customise your front lip splitter with our adjustable front extensions and front winglets (sold seperately). Easily installed with the help of our pre-pressed brass fittings on the splitter, allowing you to match the width to the wheels of your MK7 R.

Our custom designed and made Chassis Mounts are designed to be mounted behind the bumper using OEM holes already located in the chassis. This achieves better tensile load giving it unrivalled rigidity and strength and can absorb scrapes while protecting your bumper. Provisions for transmission and brake cooling have also been taken into consideration. 

Our MK7 Golf R body kit range shares the same strength, durability and technology as our popular Volkswagen Golf, i30N and Ford Focus RS line up which is trusted by many enthusiasts. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

Front extensions & front winglets sold separately.

---

KIT INCLUDES:

• MK7 Golf R front lip splitter V3
• Pre-mounted adjustable Aerospacers
• Stainless steel crossbar mounts (pair: left & right)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black
• Powder coated stainless steel 

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:
All Flow Designs MK8 Golf GTI Front Lip Splitters and Reinforcement Parts are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your front lip splitter, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship.

The Volkswagen MK8 Golf GTI front lip splitter range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

Further customise your front lip splitter with our accessories range (sold separately), which includes adjustable front lip extensions and front lip winglets. These can be installed in our pre-pressed brass fittings already installed on the splitter - the adjustable options allows you to match the width to the wheel setup of your MK8 Golf GTI. The complete MK8 Golf GTI Full Splitter Kit is also available.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

KIT INCLUDES:

• MK8 Golf GTI Front Lip Splitter
• Stainless Steel Reinforcement Plate
• Pre-mounted adjustable Aerospacers
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable front extension will bolt directly onto our MK8 Golf GTI front lip splitter thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Front Extensions are only compatible with Flow Designs MK8 GTI front lip splitter which is designed to be an adjustable direct bolt-on accessory.

Front Lip Splitter with Bumper Reinforcement Plate & Front Lip Splitter Winglets (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI adjustable front lip splitter extensions
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 4.5mm thick ABS plastic
• Scratch resistant textured ABS plastic

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable front extension will bolt directly onto our MK8 Golf GTI front lip splitter thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Front Extensions are only compatible with Flow Designs MK8 GTI front lip splitter which is designed to be an adjustable direct bolt-on accessory.

Front Lip Splitter with Bumper Reinforcement Plate & Front Lip Splitter Extensions (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI Front Lip Splitter Winglets (Pair)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 4.5mm thick ABS plastic
• Scratch resistant textured ABS plastic

DESCRIPTION
Suitable for MK8 Golf GTI model
OEM SIDE SKIRT REMOVAL REQUIRED

DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable side skirt splitter winglets will bolt directly onto our MK8 Golf GTI side skirt splitters thanks to the pre-pressed threaded brass fittings installed into the splitter. Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Side Skirt Splitter Winglets are only compatible with Flow Designs MK8 GTI Side Skirt Splitters which is designed to be an adjustable direct bolt-on accessory.

MK8 Golf GTI Side Skirt Splitter Winglets (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI Side Skirt Splitters (pair)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE SIDE SKIRT REMOVAL

Details:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable side splitter winglets will bolt directly onto our MK8 Golf GTI side skirt splitters thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Side Skirt Splitter Winglets are only compatible with Flow Designs MK8 GTI Side Skirt Splitters which is designed to be an adjustable direct bolt-on accessory.

MK8 Golf GTI Side Skirt Splitters (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI Side Skirt Splitter Winglets (pair)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 4.5mm thick ABS plastic
• Scratch resistant textured ABS plastic

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:
Experience Flow-Lock rear diffuser technology for your Volkswagen MK8 Golf GTI, sharing the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

The Flow-Lock interlocking system allows for the final assembly of the diffuser fins without tools or fasteners. A simple push and click and the kit is assembled and ready for installation - this means zero exposed hardware giving you the cleanest look for your MK8 Golf GTI rear. Friendly reminder, the 10 year warranty applies for the rear valance only but does not include the ABS diffuser fins.

No more L-brackets, no additional exposed hardware and no double-sided tape, experience the Flow-Lock difference today! The rear valance and diffuser fins fit nice and snug between the MK8 GTI dual exhaust tips. Giving your MK8 GTI a nice clean look but still upholds an aggressive quality!!!

All Flow Designs MK8 Golf GTI rear diffusers are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your rear diffuser, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

KIT INCLUDES:

• MK8 Golf GTI rear diffuser (rear valance and Flow-Lock diffuser fins)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:
10mm thick polyethylene composite, bevelled edges

• Hand polished satin black
• 4.5mm thick textured ABS
• scratch resistant textured ABS plastic
• CNC engraved logo and features