You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Volkswagen

Set Descending Direction

   

Items 1 to 10 of 52 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. P3 Cars Analog Gauge - VW Mk7 / MK7.5 Golf GTI (2014-2019) - Right Hand Drive

    P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 Sensors
  2. P3 Cars Analog Gauge - VW Mk7 / MK7.5 Golf R (2014-2019)

    P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 Sensors
  3. P3 Cars Analog Gauge - VW EOS/Scirocco (2009-2018)

    P3 Cars - V3 2019 Release

    NEW FEATURES

    • New control box and updated screen bargraph
    • Updated harness with streamlined connectors
    • Two additional universal analog inputs
    • Pre-configured analog inputs for P3 Sensors
    • Plug and Play power/ground harness option
    • Easy "Upgrade Kit" to convert to full V3 OBD2

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost reference from engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    OEM Vent Option

    • We install the display in an OEM vent for your vehicle to make your install even easier.

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps

     Questions? Check out our P3 Analog Gauge install/config page for details.

  4. P3 Cars Analog Gauge - VW Mk6 GTI (2009-2013)

    P3 Cars - V3 2019 Release

    NEW FEATURES

    • New control box and updated screen bargraph
    • Updated harness with streamlined connectors
    • New improved color coded obd2 harness
    • Read D.T.C's on command
    • Remove unwanted PIDs / gauge modes
    • Configure units individually for English/Metric
    • Calibrate vehicle speed reading
    • Read AFR in Lambda (vehicles with wideband)
    • Auto-detect available PIDs / sensors
    • Pre-configured analog inputs for P3 Sensors

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    OEM Vent Option

    • We install the display in an OEM vent for your vehicle to make your install even easier.

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps

     Questions? Check out our P3 Analog Gauge install/config page for details.

  5. P3 Cars Analog Gauge - VW Mk6 R (2009-2013)

    P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 Sensors The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs. 4 Available Analog Readouts Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included Analog input 1 (brown wire - can read any 0-5 volt linear output sensor) Analog input 2 (blue wire - can read any 0-5 volt linear output sensor) Battery voltage (red wire / black wire - read through power and ground wires) optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on) OEM Vent Option We install the display in an OEM vent for your vehicle to make your install even easier. Analog gauge base kit includes Integrated display Analog Box control unit Main harness Hard-wire harness Analog boost sensor *boost tap not included Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end 3 zip ties 2 scotchlok wire taps Questions? Check out our P3 Analog Gauge install/config page for details.
  6. P3 Cars Analog Gauge - VW Golf MK5 GTI (2005-2009)

    P3 Cars - V3 2019 Release

    NEW FEATURES

    • New control box and updated screen bargraph
    • Updated harness with streamlined connectors
    • New improved color coded obd2 harness
    • Read D.T.C's on command
    • Remove unwanted PIDs / gauge modes
    • Configure units individually for English/Metric
    • Calibrate vehicle speed reading
    • Read AFR in Lambda (vehicles with wideband)
    • Auto-detect available PIDs / sensors
    • Pre-configured analog inputs for P3 Sensors

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    OEM Vent Option

    • We install the display in an OEM vent for your vehicle to make your install even easier.

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps

     Questions? Check out our P3 Analog Gauge install/config page for details.

  7. P3 Cars Analog Gauge - VW Golf MK5 R32 (2005-2009)

    P3 Cars - V3 2019 Release

    NEW FEATURES

    • New control box and updated screen bargraph
    • Updated harness with streamlined connectors
    • New improved color coded obd2 harness
    • Read D.T.C's on command
    • Remove unwanted PIDs / gauge modes
    • Configure units individually for English/Metric
    • Calibrate vehicle speed reading
    • Read AFR in Lambda (vehicles with wideband)
    • Auto-detect available PIDs / sensors
    • Pre-configured analog inputs for P3 Sensors

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    OEM Vent Option

    • We install the display in an OEM vent for your vehicle to make your install even easier.

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps

     Questions? Check out our P3 Analog Gauge install/config page for details.

  8. P3 Analog Gauge - VW Tiguan (2017+)

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    Optional Add-Ons

    • OBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
    • P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
    • LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
    • Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...

    OEM Vent Option

    • We install the display in an OEM vent for your vehicle to make your install even easier.

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps
    $399.00
  9. Flow Designs - MK8 Golf R Rear Spat Winglets (Pair)


    DESCRIPTION


    ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE


    To celebrate the upcoming release of the latest Flow Designs kit for the MK8 Golf R, we are giving you this special opportunity to pre-order our full range of body enhancements with a special discounted price!

    To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order)! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!

    If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.

    Suits MK8 Golf R models


    INSTALL DOES NOT REQUIRE BUMPER REMOVAL

    DETAILS:


    Our adjustable rear spat winglets will bolt directly onto our MK8 Golf R rear spats thanks to the pre-pressed in threaded brass fittings on our rear spats (sold seperately). Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

    The MK8 Golf R body kit range shares the same durability and technology as our renowned WRX, Golf GTI and Focus RS line up which is trusted by car enthusiasts worldwide.

    We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

    Rear spats sold seperately

    KIT INCLUDES:


    MK8 Golf R Rear Spat Winglets (pair)
    2 Flow Designs stickers


    MATERIAL & FINISH:


    4.5mm thick ABS plastic
    Scratch resistant textured ABS plastic

    $79.00
  10. TurboSmart TS-0223-1091 Blow-Off Valves BOV Kompact EM Dual Port VR4 - Fits VW MK6 1.4 TSI & VW Polo GTI 6R

    • Plug and play compatability
    • 400% stronger than the OE Diverter Valve
    • Designed to handle boost pressure up to 30PSI
    • Ideal for lightly modified vehicles
    The Turbosmart Kompact EM Series combines world leading electronics and more than two decades of blow off valve technology for rapid response and unbeatable performance. The Turbosmart EM Series is a plug and play upgrade for OE electronic diverter valves that are prone to cracking under pressure. Featuring a patent-pending pressure control, the Turbosmart Kompact EM Series are faster than the OE unit and will not leak under pressure.

    Features:

    - Plumb Back
    - Patent pending integrated pressure control
    - Plug and play compatability
    - Integrated proprietary high-temperature solenoid valve
    - 400% stronger than the OE unit
    $360.00
Set Descending Direction

   

Items 1 to 10 of 52 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5