Volkswagen

Product Description

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.

·       Stainless Steel Rivets
·       Stainless Steel Fasteners
·       Carbon fabric Outer Shell
·       Calcium Magnesium Silicate Wool constructed Inner Core
·       High temperature silica fabric

The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.

Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:

• T4
• T5
• T25
• The Garrett GTX28 and GTX30 Range
• Borg Warner EFR6258

Interior Surface:

·       Max Temperature Rating: 2300°F/1260°C
·       Continuous Use Limit: 1832°F1000°C

Exterior Surface:

·       Direct Contact Limit: 1800°F/982°C
·       Radiant Heat Limit: 2500°F/1371°C

Complimentary Products

Product Description

THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES

The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.

⭐ Excellent quality product & easy to fit ⭐

The high flow male alloy coupler is a bayonet type, rotated to the locked position before fixing in place by positioning the hose on the alloy coupler and tightening the hose clamps at both ends of the hose, anchoring the alloy coupler in position to complete the installation.

The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

As with all Forge products, this hose comes with a lifetime warranty*

iPE Innotech revolutionizes the Hot-Hatch-Segment with an exhaust system completely made from stainless steel, for the new VW Golf R MK7.

This extremely durable, performance increasing and valve-controlled system brings your new Golf R more than only an exclusive touch.

Our premium-class exhaust system has larger pipes in diameter and an optimized exhaust flow, leading to more performance and improved torque and response.

The system comes standard with chrome silver tips. Different colour tips are available from the drop-down menu.

Please note if you have an MK7.5 Golf R - The link pipe to the muffler is different to the MK7 Golf R. 

DESCRIPTION

1.Improper adjustments made during installation may result in short-term to permanent damages to the iPE exhaust system and/or your vehicle.

iPE will not be held responsible for any damages to the vehicle, and warranties on our products will be voided if the damages occurred due to improper installation.If you have any trouble installing the system please contact your authorized dealer!



2. The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any other damages caused by improper installation or operation of the iPE exhaust system. When installing the iPE exhaust system be careful that the exhaust system does not touch other parts sensitive to high temperature.



3. iPE makes no representation or warranties with regard to damage caused by the improper installation, use and maintenance of the iPE exhaust system. The warranty is limited to defects recognized by our technical department and of normal use only, and excludes items subject to normal wear and tear(gaskets and damping wool). The warranty is voided in case of accidents, modifications, improper or competition uses.



*Actual product may vary due to product enhancement. iPE reserves the right to revise, change, explain the product.

*Cat Pipe/Cat-bypass Pipe ONLY fit with iPE Catback System

Description:

Description:

Directly plugs into the manifold where the factory MAP is located, LEYO Boost Tap provides the most reliable solution to create a vacuum/boost port for boost monitoring. The dual port design offers hassle free multiple boost references with direct installation, no fabrication required.

Specifications:

• Dual port boost tap allows for multiple boost references.

• CNC machined T6061 aluminum structure.

• Heavy-duty screw plug included.

Description:

Get the latest in performance aesthetics with Leyo Motorsports light weight aluminium engine fluid caps. Made from the finest raw materials, these fluid caps will add that clean modified look to your engine bay without the messy installation. Designed in-house by our technical team, these caps are built to perfection to seamlessly integrate with your vehicle engine bay.

We offer four unique caps for the oil filler neck, the coolant reservoir, the brake fluid reservoir and finally the windshield washer tank. Changing these under the bonnet will add that unique personal touch and create an engine bay you’d be proud to show off with the confidence of performing better than the OEM parts. To make installation as simple as possible, we’ve included an Allen Set screw wrench for your new aluminium engine compartment oil caps.

Don’t wait, get the stylish appearance your car deserves from Leyo Motorsport today.

Specifications:

• Constructed from T6061 Billet Aluminium for strength.
• Hard coated anodized finish.
• Visual improvements to the engine bay

BRAKE FLUID RESERVOIR CAP

Description:

Unleash the power of your R with the Leyo high flow decat downpipe. By forgoing the restrictive catalyst, the full potential of your R can now be released. This downpipe is made with high grade 304 stainless steel for long lasting durability. Leyo downpipe works with either Leyo Catback Exhaust System or factory catback exhaust.

Specifications:

• 3” 304 stainless steel downpipe.

• Direct bolt on.

• Decat downpipe.

Description:

Description:

Want to enhance driving dynamics of your Golf R? Reduce body roll during cornering? Improve ride quality? Enhance visual appeal of your ride?The solution to all of these is our dynamic lowering springs for the VW MK7 / MK7.5Golf R.

Leyo Motorsport lowering springs lowers the car on an average of 20-25mm. With the now lower center of gravity, excessive body roll is reduced during cornering. The ugly gap between the tire and wheel arch has also been reduced giving your car a meaner stance than before.

As with every Leyo Motorsport product, these lowering springs has been tested in real world condition and on the race track before releasing it to the market ensuring that you receive the best product there is on the market.

Specifications:

• Reduce body roll

• Improve ride quality

• Enhance driving dynamic

• Lowers the car 20-25mm