Volkswagen
IE Harsh Climate 5" Oiled Air Filter & Sock Upgrade Kit
EXPLORE WITH CONFIDENCE
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
KIT DETAILS
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
- 1X IE oiled 8 pleat density performance 5" filter
- 1X IE pre-filter intake sock
- 1X Air filter worm clamp
RECHARGING
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
COMPATIBLE INTAKES
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
- IEINCI11 - IE MQB 2.0T/1.8T Gen 3 Cold Air Intake
- IEINCK3 - IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
- IEINCG2A - IE Audi 3.0T Cold Air Intake For B8/B8.5 S4 & B8.5 S5
- IEINCN1 - IE Audi 3.0T Cold Air Intake For C7 A6 & A7
- IEINSG1 - IE Audi 3.0T Cold Air Intake For 8R SQ5 & Q5
- IEINCG1 - IE Audi 2.0T TSI Cold Air Intake For B8/B8.5 A4 & A5
- IEINCK1 - IE Audi B9 A4 & A5 Cold Air Intake
- IEINCW1 - IE Cold Air Intake System For VW MQB Tiguan 2.0T
- IEINCV1 - IE Performance Intake System For VW Atlas 2.0T
- IEINCC2 - IE 2.0T TSI Cold Air Intake For VW MK5, MK6 GTI, Jetta, CC & 8P A3
- IEINCB4 - IE 2.0T FSI Cold Air Intake Kit For MK6 Golf R, A3, MK5 GTI, Jetta
- IEINCC4 - IE Gen 3 2.0T/1.8T Cold Air Intake For 2013-2018 MK6 Jetta & GLI
- IEINCJ1 - IE Carbon Fiber Intake For Audi TTS MK2
- IEINCI4 - IE VW 1.4T Cold Air Intake For VW MK6 Jetta
$129.00
CTS TURBO REPLACEMENT AIR FILTER - RS3 FL/ 8S TTRS 2.5T EVO FOR CTS-IT-255R
This is a replacement air filter for CTS Turbo Intake - CTS Turbo 8V.2 RS3 FL / 8S TTRS EVO Intake (2018+)
High quality molded silicon base and cap
Stainless steel clampFitment:
- CTS-IT-255R
Fitment:
- 2019-current Audi RS3 2.5T EVO (EA855)
- 2019-current Audi TTRS 2.5T EVO (EA855)
$149.00
Flow Designs - VW MK8 Golf GTI Side Skirt Splitters (Pair)
DESCRIPTION
Suitable for MK8 Golf GTI model
OEM SIDE SKIRT REMOVAL REQUIREDDETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.Our adjustable side skirt splitter winglets will bolt directly onto our MK8 Golf GTI side skirt splitters thanks to the pre-pressed threaded brass fittings installed into the splitter. Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.
VW MK8 Golf GTI Side Skirt Splitter Winglets are only compatible with Flow Designs MK8 GTI Side Skirt Splitters which is designed to be an adjustable direct bolt-on accessory.
MK8 Golf GTI Side Skirt Splitter Winglets (Pair) sold seperately
KIT INCLUDES:
- MK8 Golf GTI Side Skirt Splitters (pair)
- 2 Flow Designs stickers
- Fitting kit with black stainless hardware
MATERIAL & FINISH:- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
$440.00
Flow Designs - S3 8V Sedan FL Front Lip Splitter & Mounting Brace
DETAILS
Complete the aggressive aesthetic of your S3 8V Sedan FL with our front lip splitter, renowned for their durability under all driving conditions. The S3 Sedan FL front lip splitter includes a mounting brace to boost the overall strength - giving you confidence in a reliable install for both the splitter and your OEM bumper.
Further customise your front lip splitter with our accessories range, which includes adjustable front extensions and front winglets. These can be installed in our pre-pressed brass fittings already installed on the splitter, the adjustable options allows your to match the width to the wheels of your S3.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Front extensions and front winglets sold separately.
KIT INCLUDES:
- S3 8V Sedan FL Front Lip Splitter
- S3 8V Sedan FL Mounting Brace
- 2 Flow Designs Stickers
- Fitting kit
MATERIAL & FINISH- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
$436.00
Flow Designs - S3 8V Sedan FL Full Lip Splitter Set
DETAILS:
The Flow Designs splitter set for the Audi S3 8V Sedan FL includes front/side splitters, rear spats & flow lock rear diffuser. Adding all bolt on accessories or our optional extras (Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount) will be the perfect addition to your S3 Sedan, as Flow Designs splitters offer perfect fitment, easy installation every time.
All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES:
- S3 8V Sedan FL Front Lip Splitter & Mounting Brace
- S3 8V Sedan FL Side Skirt Splitters (Pair)
- S3 8V Sedan FL Rear Spats (Pair)
- S3 8V Sedan FL Flow-Lock Rear Diffuser
- WITH all accessories package: S3 8V Sedan FL Front Lip Splitter Extensions (Pair)
- WITH all accessories package: S3 8V Sedan FL Front Lip Splitter Winglets (Pair)
- WITH all accessories package: S3 8V Sedan FL Side Skirt Splitter Winglets (Pair)
- WITH all accessories package: S3 8V Sedan FL Rear Spat Winglets (Pair)
- ADD: Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount if desired.
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH:- Front lip splitter, side skirt splitters, rear diffuser, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
- Rear diffuser fins, Window Vents and accessories: scratch-resistant textured ABS plastic
- Fire Extinguisher Bracket: 3mm Stainless Steel, Powder-coated Texture Black
$1,244.00
Flow Designs - VW MK8 Golf GTI Rear Spats (Pair)
DESCRIPTION
Suitable for MK8 Golf GTI modelDETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.Our adjustable rear spat winglets will bolt directly onto our MK8 Golf GTI rear spats thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.VW MK8 Golf GTI Rear Spat Winglets are only compatible with Flow Designs MK8 GTI Rear Spats which is designed to be an adjustable direct bolt-on accessory.
MK8 Golf GTI Rear Spat Winglets (Pair) sold seperately
KIT INCLUDES:
- MK8 Golf GTI Rear Spats (pair)
- 2 Flow Designs stickers
- Fitting kit with black stainless hardware
MATERIAL & FINISH:- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
$132.00
Flow Designs - VW MK8 Golf GTI Full Lip Splitter Set - All Accessories
DESCRIPTION
Suitable for MK8 Golf GTI modelDETAILS:
Get the original and best MK8 Golf GTI splitter kit from Flow Designs Australia, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and tuners worldwide. Being one of the first to conceptualise, develop and manufacture the strongest lip splitters on the market, all our splitter components are backed by our unbeatable 10 year warranty (excludes all ABS accessories). Our 10mm polyethylene composite used in our splitter range is completely shatter-resistant and superior to any comparable ABS product.The MK8 Golf GTI splitter kit is completely designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your splitter kit, it is hand-finished, polished and quality inspected by our team to ensure you receive parts of the highest quality and craftsmanship.
All our splitter products are precision designed to accurately suit OEM bumpers/side skirts. Everything is model specific so perfect fitment is guaranteed, and instructions are provided for easy installation process (which can be completed with simple hand tools).
The Volkswagen MK8 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES:- MK8 Golf GTI front lip splitter & bumper reinforcement plate
- MK8 Golf GTI side skirt splitters (pair)
- MK8 Golf GTI Flow-Lock rear diffuser
- MK8 Golf GTI rear spats/pods (pair)
- WITH All Accessories: MK8 Golf GTI adjustable front winglets (pair)
- WITH All Accessories: MK8 Golf GTI adjustable side winglets (pair)
- WITH All Accessories: MK8 Golf GTI adjustable rear winglets (pair)
- WITH All Accessories: MK8 Golf GTI adjustable front extensions (pair)
- x2 Flow Designs stickers
- x1 Flow Designs air freshener
- Fitting kit with black stainless hardware
MATERIAL & FINISH:- Front lip splitter, side skirt splitters, rear valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges, impact-resistant
- Hand polished satin black
- Flow-Lock fins, winglets and extensions: scratch resistant textured ABS plastic
- Window Vents: 4.5mm scratch resistant textured ABS plastic, CNC engraved logo and features
- Rear Spoiler Extension: 4.5mm scratch-resistant reversible textured (Top) with hi-gloss acrylic underside, CNC engraved logo and features
- Fire Extinguisher Bracket/Mount: 3mm Stainless Steel, Powder-coated Texture Black
- HOW STRONG A
$1,780.00
Flow Designs - VW MK8 Golf GTI Rear Spoiler Extension
DESCRIPTION
Suitable for MK8 Golf GTI model
DRILLING INTO OEM SPOILER REQUIREDDETAILS:
Complete the aero aesthetic of your Volkswagen MK8 Golf GTI with our newly developed spoiler extension! The rear spoiler extension has been designed and developed in-house at our Bayswater factory in Australia, with our team focused on providing another customisation option for your VW Golf!The Flow Designs Rear Spoiler Extension was designed to be reversible. Meaning, one side of the spoiler extension is gloss black and the other is textured matte with an engraved Flow Designs logo. It can be installed gloss side up or matte side up, depending on your personal taste, with darkened hardware included for a clean overall look once installed.
Spoiler removal is not required for installation.
Be the FIRST to experience the Flow Designs MK8 Golf GTI rear spoiler extension, as these are newly developed with extremely limited quantities available!
KIT INCLUDES:
- MK8 Golf GTI Rear Spoiler Extension
- x4 black dress up bolts
- x2 Flow Designs stickers
- Install instructions
- x1 EDITION 1 stickers (limited to first production run preorder purchases)
MATERIAL & FINISH:- 4.5mm acrylic (scratch resistant on the matte side)
- Spoiler: gloss underside, matte topside (can be installed either side up)
- CNC engraved logo and features
- Install Instructions (PDF)
$269.00
Flow Designs - VW MK8 Golf GTI Side Skirt Splitter Winglets (Pair)
DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE SIDE SKIRT REMOVALDetails:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.Our adjustable side splitter winglets will bolt directly onto our MK8 Golf GTI side skirt splitters thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.VW MK8 Golf GTI Side Skirt Splitter Winglets are only compatible with Flow Designs MK8 GTI Side Skirt Splitters which is designed to be an adjustable direct bolt-on accessory.
MK8 Golf GTI Side Skirt Splitters (Pair) sold seperately
KIT INCLUDES:
- MK8 Golf GTI Side Skirt Splitter Winglets (pair)
- 2 Flow Designs stickers
- Fitting kit with black stainless hardware
MATERIAL & FINISH:- 4.5mm thick ABS plastic
- Scratch resistant textured ABS plastic
$69.00
Flow Designs - VW MK8 Golf GTI Front Lip Splitter Winglets (Pair)
DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVALDETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.Our adjustable front extension will bolt directly onto our MK8 Golf GTI front lip splitter thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.VW MK8 Golf GTI Front Extensions are only compatible with Flow Designs MK8 GTI front lip splitter which is designed to be an adjustable direct bolt-on accessory.
Front Lip Splitter with Bumper Reinforcement Plate & Front Lip Splitter Extensions (Pair) sold seperately
KIT INCLUDES:
- MK8 Golf GTI Front Lip Splitter Winglets (Pair)
- 2 Flow Designs stickers
- Fitting kit with black stainless hardware
MATERIAL & FINISH:- 4.5mm thick ABS plastic
- Scratch resistant textured ABS plastic
$69.00
SAFE & SECURE SHOPPING
