Volkswagen

EXPLORE WITH CONFIDENCE

Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air. 

KIT DETAILS

This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.

KIT CONTENTS:

• 1X IE oiled 8 pleat density performance 5" filter
• 1X IE pre-filter intake sock
• 1X Air filter worm clamp 

RECHARGING

As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way. 

COMPATIBLE INTAKES

Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack. 

• IEINCI11 - IE MQB 2.0T/1.8T Gen 3 Cold Air Intake
• IEINCK3 - IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
• IEINCG2A - IE Audi 3.0T Cold Air Intake For B8/B8.5 S4 & B8.5 S5
• IEINCN1 - IE Audi 3.0T Cold Air Intake For C7 A6 & A7
• IEINSG1 - IE Audi 3.0T Cold Air Intake For 8R SQ5 & Q5
• IEINCG1 - IE Audi 2.0T TSI Cold Air Intake For B8/B8.5 A4 & A5
• IEINCK1 - IE Audi B9 A4 & A5 Cold Air Intake
• IEINCW1 - IE Cold Air Intake System For VW MQB Tiguan 2.0T
• IEINCV1 - IE Performance Intake System For VW Atlas 2.0T
• IEINCC2 - IE 2.0T TSI Cold Air Intake For VW MK5, MK6 GTI, Jetta, CC & 8P A3
• IEINCB4 - IE 2.0T FSI Cold Air Intake Kit For MK6 Golf R, A3, MK5 GTI, Jetta
• IEINCC4 - IE Gen 3 2.0T/1.8T Cold Air Intake For 2013-2018 MK6 Jetta & GLI
• IEINCJ1 - IE  Carbon Fiber Intake For Audi TTS MK2
• IEINCI4 - IE VW 1.4T Cold Air Intake For VW MK6 Jetta

DESCRIPTION

CTS Turbo is proud to release our B-Cool Billet 3.0T Oil Filter Housing.  The OE plastic filter housing is quite fragile and is know to become brittle and crack over time.  Each CTS Turbo B-Cool Billet 3.0T Oil Filter Housing is constructed in house from T6061 Aluminum.  Not only does the B-Cool filter look good, but it works great.  We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.  Installation is very straight forward and only required basic hand tools.

Product Details:

•   Made in Canada from billet T6061 Aluminum
•   Hard anodized black for stealth and longevity
•   Uses OEM O-ring
•   OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
•   Installation of CTS-HW-0243 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
•   Compatible with OEM Filter

The CTS B-Cool Billet 3.0T Oil Filter Housing fits Audi 3.0T equipped models such as B8 & B8.5 S4, A6 etc.

ADDITIONAL INFORMATION

Model

Generation

CTS Turbo is proud to release our high flow Turbo Muffler delete for the Non-MQB Gen3 EA888.3 1.8TSI and 2.0TSI engines with the stock turbo.

The CTS Turbo Muffler delete is a one-piece design CNC constructed from T6 6061 aircraft-grade aluminum and hard anodized to reduce wear.

Our Turbo Muffler delete replaces the restrictive, power-robbing OEM Turbo Muffler, which is designed to reduce turbocharger harmonic noise.  By removing the restriction you gain 6-7HP and improve the throttle response!

Our kit installs in 30 minutes with hand tools, fits perfectly and looks great.

For those of you that want optimal power and boost response, the CTS Turbo Gen3 TSI Turbo Muffler Delete is your answer.

NOTE: compatible only with factory Garrett/Honeywell MGT1752S turbo on EA888.3 TSI (turbocharger OE part number 06K145874)

Compatible with factory and CTS Turbo outlet pipes.

NOT FOR MQB VEHICLES!

Fitment:

• Volkswagen Beetle (MK2) Gen3 ONLY
• Volkswagen Jetta (MK6) 1.8TSI & GLI 2.0T (2013.5-2018)
• Volkswagen Scirocco (MK3) Gen3 ONLY
• Volkswagen Passat 1.8TSI & 2.0TSI (B7) Gen3 ONLY

DESCRIPTION

CTS Turbo is proud to announce our new Vent to Atmosphere Adapters for Mercedes-Benz M177 W213/W222/X290 E63/E63S/S63/G63/AMG GT63/AMG GT63S.

These are a bolt-on solution to achieve that blow-off valve sound, but without being too loud.

There will be no CEL since the OEM Diverter Valve is still being used and no tuning is required.

Features:

• Precision machined aluminum
• Black anodized
• Quick installation.
• NO Check engine light

Fitment:

• 2017-2021 Mercedes-Benz E63/E63S (W213)
• 2018-2021 Mercedes-Benz S63 (W222/C217)
• 2019-2020 G63 AMG (W463)
• 2019-2020 AMG GT 63/AMG GT 63S (X290)

Model

Generation

DESCRIPTION

ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE

To celebrate the upcoming release of the latest Flow Designs kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!

To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!

If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.

Suits MK8 Golf R models

INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:

Our adjustable front lip splitter extensions will bolt directly onto our MK8 Golf R front lip splitter thanks to the Pre-Pressed threaded brass fittings installed into the splitter. adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm. Flow branded black stainless hardware will be provided to ensure perfect fitment and adjustability.

Our MK8 Golf R body kit range shares the same strength, durability and technology as our popular Volkswagen Golf, i30N and Ford Focus RS line up which is trusted by many enthusiasts. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

Front lip splitter & front winglets sold separately.

KIT INCLUDES:

MK8 Golf R adjustable front lip splitter extensions
2 Flow Designs stickers
Fitting kit with black stainless hardware

MATERIAL & FINISH:

4.5mm thick ABS plastic
Scratch resistant textured ABS plastic

DESCRIPTION

ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE

To celebrate the upcoming release of the latest Flow Designs kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!

To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!

If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.

Suits MK8 Golf R models

INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:

Our adjustable front lip splitter winglets will bolt directly onto our MK8 Golf R front lip splitter thanks to the Pre-Pressed threaded brass fittings installed into the splitter. adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm. Flow branded black stainless hardware will be provided to ensure perfect fitment and adjustability.

Our MK8 Golf R body kit range range shares the same strength, durability and technology as our popular Volkswagen Golf, i30N and Ford Focus RS line up which is trusted by many enthusiasts. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

Front lip splitter & front extensions sold separately.

KIT INCLUDES:

MK8 Golf R Front Lip Splitter Winglets (Pair)
2 Flow Designs stickers
Fitting kit with black stainless hardware

MATERIAL & FINISH:

4.5mm thick ABS plastic
Scratch resistant textured ABS plastic

DESCRIPTION

ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE

To celebrate the upcoming release of the latest Flow Designs kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!

To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!

If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.

Suits MK8 Golf R models

INSTALL DOES NOT REQUIRE SIDE SKIRT REMOVAL

Details:

Our adjustable side skirt splitter winglets will bolt directly onto our MK8 Golf R side skirt splitter thanks to the Pre-Pressed threaded brass fittings installed into the splitter. adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm. Flow branded black stainless hardware will be provided to ensure perfect fitment and adjustability.

Our MK8 Golf R body kit range range shares the same strength, durability and technology as our popular Volkswagen Golf, i30N and Ford Focus RS line up which is trusted by many enthusiasts. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

Side skirt splitters sold separately.

KIT INCLUDES:

MK8 Golf R Side Skirt Splitter Winglets (pair)
2 Flow Designs stickers
Fitting kit with black stainless hardware

MATERIAL & FINISH:

4.5mm thick ABS plastic
Scratch resistant textured ABS plastic

DESCRIPTION

ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE

To celebrate the upcoming release of the latest Flow Designs Edition One kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!

To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!

If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.

Suits MK8 Golf R models

INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:

Continue the aggressive aesthetic of your MK8 Golf R rear with our rear spats - known for their durability and strength. Installation does not require bumper removal! Pre-pressed brass fittings on the rear pods allow for installation of our rear winglets (sold separately) to allow for further customisation to individual taste.

The MK8 Golf R body kit range shares the same durability and technology as our renowned WRX, Golf GTI and Focus RS line up which is trusted by car enthusiasts worldwide.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

Rear winglets sold seperately

KIT INCLUDES:

MK8 Golf R Rear Spats (pair)
2 Flow Designs stickers
Fitting kit with black stainless hardware

MATERIAL & FINISH:

10mm thick polyethylene composite, bevelled edges
Hand polished satin black

DESCRIPTION

ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE

To celebrate the upcoming release of the latest Flow Designs Edition One kit for the MK8 Golf R, we are giving you this special opportunity to order our full range of body enhancements with a special discounted price!

To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!

If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.

Suits MK8 Golf R models

INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:

Experience Flow-Lock rear diffuser for your MK8 Golf R, sharing the same durability and technology as our renowned WRX, Golf GTI and Focus RS line up - trusted by many car enthusiasts worldwide. The rear valance and diffuser fins will clear the MK8 R dual exit exhaust tips with ease, and rear bumper removal is not necessary for installation of the diffuser.

The Flow-Lock interlocking system allows for the final assembly of the diffuser fins without tools or fasteners. A simple push and click and the kit is assembled and ready for installation - this means zero exposed hardware giving you the cleanest look for your MK8 R rear.

Valance is installed to the car through bolts and nuts while the Flow-Lock diffuser fins simply click into the valance (once locked into the valance it is secure). It is also possible to install when your car is on the ground.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

KIT INCLUDES:

MK8 Golf R rear valance
MK8 Golf R Flow-Lock diffuser fins
2 Flow Designs stickers
Fitting kit with black stainless hardware

MATERIAL & FINISH:

10mm thick polyethylene composite, bevelled edges
Hand polished satin black
4.5mm thick textured ABS
scratch resistant textured ABS plastic
CNC engraved logo and features