Regular Price: $350.00
Special Price $327.23
Turbosmart's new Kompact Shortie Blow-Off Valve for the Mk7 takes performance to the next level. These valves are a high performance replacement for the Golf's standard diverter valve. Unlike the standard valve's plastic construction, they are machined from aircraft grade aluminium, and bolt straight up to the factory location, offering all the technology from Turbosmart's race-bred BOV range in an OEM-replacement package. The Plumb Back is a 100% recirculating blow-off valve, routing all vented air back into the intake. This valve operates at a similar level of volume to the standard valve, avoiding unwanted attention. Turbosmart's Kompact Shortie does not leak, bleed boost pressure or struggle with increased boost on tuned vehicles. It also completely eliminates compressor surge, allowing the Golf's turbo to operate to its full potential, and for longer.
Regular Price: $330.00
Special Price $327.23
This is a CTS Turbo universal 3″ low profile cone filter, it has a tapered design to fit in tight spots. These filters are used in our MK4 1.8T, 2.0T FSI, 2.oT TSI, B8 A4 intake kits. Also these filters can also be used in a custom big turbo application.
3.0″ Inlet x 8.0″ Long x 5.0″ Wide
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
CTS Turbo is proud to release our 187mm Dual Pulley Upgrade Kit for Supercharged 3.0T V6 engines (press-on style).
The smaller diameter supercharger pulley and larger diameter crank pulley will increase the speed at which the supercharger spins and will increase the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not drastically increase stress or excessive wear on supercharger or engine components.
This kit features press-on style supercharger pulley. Check on your vehicle before ordering!
NOTE: This kit must be used with appropriate “Stage 2+” or equivalent performance software. Please contact your tuner. Use of upgraded heat exchanger is highly recommended.
Kit Includes:
1 x CTS Turbo Supercharger Pulley, Press-on, 57.3mm
1 x CTS Turbo Crank Pulley, 187mm
8 x Grade 12.9 bolts
1 x Bando Serpentine Belt (Made in the USA)
Fitment (check on vehicle):
Now fully compatible with all 2018-2020 Audi RS3/TTRS 2.5T DAZA and DNWA engines, this is one kit to fit them all!
CTS Turbo is proud to announce our improved 8V, 8V.2/8S Audi RS3/TTRS Throttle Body Inlet Kit for DAZA and DNWA
Our high flow throttle body inlet is designed it to be larger, but also more aerodynamic than the stock part. Our inlet has a 56% internal volume increase over the stock inlet. Using the latest CAD software, the shape of the inlet tract was flow optimized and cast from aluminum for best performance. All critical parts were CNC machined to ensure perfect fitment and performance.
We have also included our machined throttle body spacer from with two additional ports for boost reference and methanol injection; as well and a high-flow 2.75″ throttle inlet pipe. Custom-made silicone couplers and t-bolt clamps allow for seamless, easy installation.
Features:
Fitment:
Regular Price: $699.00
Special Price $629.00
This is a replacement air filter for CTS Turbo Intake - CTS Turbo 8V.2 RS3 FL / 8S TTRS EVO Intake (2018+)
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
Fitment:
CTS Turbo is proud to release our high flow Turbo Muffler delete for the Non-MQB Gen3 EA888.3 1.8TSI and 2.0TSI engines with the stock turbo.
The CTS Turbo Muffler delete is a one-piece design CNC constructed from T6 6061 aircraft-grade aluminum and hard anodized to reduce wear.
Our Turbo Muffler delete replaces the restrictive, power-robbing OEM Turbo Muffler, which is designed to reduce turbocharger harmonic noise. By removing the restriction you gain 6-7HP and improve the throttle response!
Our kit installs in 30 minutes with hand tools, fits perfectly and looks great.
For those of you that want optimal power and boost response, the CTS Turbo Gen3 TSI Turbo Muffler Delete is your answer.
NOTE: compatible only with factory Garrett/Honeywell MGT1752S turbo on EA888.3 TSI (turbocharger OE part number 06K145874)
Compatible with factory and CTS Turbo outlet pipes.
NOT FOR MQB VEHICLES!
Fitment:
CTS Turbo is proud to announce our new Vent to Atmosphere Adapters for Mercedes-Benz M177 W213/W222/X290 E63/E63S/S63/G63/AMG GT63/AMG GT63S.
These are a bolt-on solution to achieve that blow-off valve sound, but without being too loud.
There will be no CEL since the OEM Diverter Valve is still being used and no tuning is required.
Generation
Make | Model | Year | Generation |
---|---|---|---|
MERCEDEZ-BENZ | AMG GT 63 | 2019 - 2020 | X290 |
MERCEDEZ-BENZ | AMG GT 63S | 2019 - 2020 | X290 |
MERCEDEZ-BENZ | E63 | 2017 - 2021 | W213 |
MERCEDEZ-BENZ | E63S | 2017 - 2021 | W213 |
MERCEDEZ-BENZ | G63 | 2019 - 2020 | W463 |
MERCEDEZ-BENZ | S63 | 2018 - 2021 | C217 |
MERCEDEZ-BENZ | S63 | 2018 - 2021 | W222 |