Volkswagen - Vehicles - SHOP BY - CTS Turbo - Supernova - SuperPro - T-carbon - Eibach - VW Central - Turbo - Diverter Valves

CTS TURBO TSI K04 UPGRADE KIT TURBO OUTLET PIPE

Sale

CTS TURBO TSI K04 UPGRADE KIT TURBO OUTLET PIPE

This Turbo Outlet Pipe is designed to fit our CTS TSI K04 kit and replaces the narrow ‘pancake’ pipe that comes as factory equipment on your vehicle.

This Turbo Outlet Pipe features 2.25″ diameter aluminum tube for optimized flow.

The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap.

This pipe is designed to the CTS Turbo K04 kits but it may work for other K04 kits (other kits fitment not guaranteed).

Product Details:

2.25” Mandrel bent tube
CNC machined FMIC mating flange
Black powder coated finish
Laser cut mounting bracket
Designed for fitment on cars with CTS TSI K04 upgrade or other K04 upgrade kits (APR, AWE Tuning, etc)

PLEASE NOTE: This product does not include the silicone as per the image. It is expected that you use the silicone that came included with your K04 Upgrade Kit.

Regular Price: $379.00

Special Price $329.00

Add to Cart

CTS TURBO MUFFLER DELETE – VW MK6 GTI - GEN1 2.0T TSI

2Review(s)

Audi	TT	MK2 (2008-2015)	2.0 TSI
Audi	A3	8P (2009-2013)	2.0 TSI (FWD)
Volkswagen	Tiguan	(2009-2011)	2.0 TSI
Volkswagen	Tiguan	(2012+)	2.0 TSI
Volkswagen	Jetta	MK5 (2010)	2.0 TSI
Volkswagen	Jetta	MK6 Sedan (2011-2017)	2.0T GLI
Volkswagen	Jetta	MK6 Sportwagen (2010-2017)	1.8TSI/2.0TSI
Volkswagen Volkswagen	Jetta Golf/GTI/Rabbit	MK6 Sedan (2014-2017) MK5 (2009)	1.8TSI/2.0T GLI 2.0 TSI
Volkswagen	Golf/GTI/Rabbit	MK6 (2010-2014)	2.0T
Volkswagen	CC	(2009+)	2.0 TSI
Volkswagen	Beetle	Beetle (2012+)	2.0 TSI

$199.00

Out of stock

CTS Turbo MK5 R32 & Passat B6, R36, Audi TT 3.2L Air Intake System

At CTS Turbo we are proud to announce our new air intake system for the MK5 R32. The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system. Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing. Our high quality silicones fit seamlessly with the OEM MAF flange allowing for smooth entry of cold air into the the engine providing peak power gains ranging from 9-15HP. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.

$629.00

Add to Cart

CTS TURBO EA888.3 GEN3 INTAKE MANIFOLD FLAP DELETE

The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold. The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.

$229.00

Out of stock

Sale

CTS Turbo Dual Port Boost Tap

Dual port boost tap allows for multiple boost references CNC machined from 6061 Aluminium Brass plug included

Regular Price: $89.95

Special Price $79.95

Add to Cart

CTS Turbo TSI Turbo Outlet Pipe

The CTS Turbo TSI Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle. Our Turbo Outlet Pipe features 2.25" diameter aluminum tube for optimized flow. The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap. The billet anodized turbo to TOP connector, 2.25" coupler and premium clamps top this package off. If you're looking for a simple bolt on modification that will optimize flow and increase power, then this part is for you.

$329.00

Out of stock

ECS Manifold Port Boost Tap Kit

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

$99.00

Out of stock

SuperPro Rear Swaybar Link Kit HD Adjustable Fits Audi Seat Skoda VW

Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Ball for low friction and long life
Elminate sway bar flex for consistent handling
Spanner provision for on-car adjustment
Suitable for application on lowered or raised vehicles

Features and Benefits:
- 6060-T5 Alloy Link Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
- SuperPro Tip To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

$199.00

Add to Cart

CTS TURBO AIR FILTER 3.5″ FOR CTS-IT-270/270R/290/300

This is a CTS Turbo universal 3.5″ cone filter, it has a tapered design primarily used in our MK7 GTI/GOLF R, B9 AUDI A4, B8/B8.5 S4, S5 intake kits. These filters can also be used in a custom big turbo application.

Product Details:

3.5″ Inlet x 8.0″ Long x 6.0″ Wide
High quality moulded silicon base and cap
Stainless steel clamp

Fitment: