You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Volkswagen - Forge Motorsports - Flow Designs

Set Descending Direction

   

Items 31 to 40 of 118 total

  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. Forge Motorsport Turbo Blanket - VW Golf MK7 / MK7.5 GTI & R, Audi S3 8V - Fits T4, T5, T25, GTX28, GTX30, EFR6258

    Product Description

    The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.

    ·       Stainless Steel Rivets
    ·       Stainless Steel Fasteners
    ·       Carbon fabric Outer Shell
    ·       Calcium Magnesium Silicate Wool constructed Inner Core
    ·       High temperature silica fabric

    The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.

    Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:

    • T4
    • T5
    • T25
    • The Garrett GTX28 and GTX30 Range
    • Borg Warner EFR6258

    Interior Surface:

    ·       Max Temperature Rating: 2300°F/1260°C
    ·       Continuous Use Limit: 1832°F1000°C

    Exterior Surface:

    ·       Direct Contact Limit: 1800°F/982°C
    ·       Radiant Heat Limit: 2500°F/1371°C

    Complimentary Products

    Uprated Intercooler

    High Flow Discharge Pipe

    Carbon Fibre Induction Kit

    $169.00
  2. Forge Motorsport High Flow Inlet Hose - VW/Audi MQB Forge Motorsport High Flow Inlet Hose - VW/Audi MQB
    Sale

    Forge Motorsport High Flow Inlet Hose - VW/Audi MQB

    Product Description

    THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES

    The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.

    ⭐ Excellent quality product & easy to fit ⭐

    The high flow male alloy coupler is a bayonet type, rotated to the locked position before fixing in place by positioning the hose on the alloy coupler and tightening the hose clamps at both ends of the hose, anchoring the alloy coupler in position to complete the installation.

    The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

    As with all Forge products, this hose comes with a lifetime warranty*

    Regular Price: $375.00

    Special Price $349.00

  3. Flow Designs - MK7 Golf R Front Lip Splitter V3 & Front Crossbar Mounts

    DETAILS

    Protect your bumper from scrapes or kerbing with our MK7 Golf R front lip splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.

    We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

    MK7 Golf R front extensions and MK7 Golf R front winglets sold separately. 


    KIT INCLUDES

    • MK7 Golf R front lip splitter
    • Pre-mounted adjustable Aerospacers
    • Stainless steel crossbar mounts (pair: left & right)
    • 2 Flow Designs stickers
    • Fitting kit

    MATERIAL & FINISH

    • 10mm thick polyethylene composite, bevelled edges
    • Hand polished satin black
  4. Flow Designs - MK7 Golf R Wagon Side Skirt Splitters V3 (Pair)

    DETAILS

    Protect your body work from scrapes or kerbing with our MK7 Golf R side skirt splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.

    Installation is simple with pre-drilled holes so there is no guesswork. We have machined out a pocket for the OEM Golf side skirt to sit snug into - this way our side skirt splitters will mount up flush with the stock body kit once installed on the car.

    We also have designed other visual prompts to show where the side skirt splitter aligns with the OEM side skirt and Golf R chassis.

    The pre-installed brass thread allow for installation of our MK7 Golf R adjustable side winglets which are sold separately as a bolt-on accessory to suit our side skirt splitters. 


    KIT INCLUDES

    • MK7 Golf R side skirt splitters (pair)
    • 2 Flow Designs stickers
    • Fitting kit

    MATERIAL & FINISH

    • 10mm thick polyethylene composite, bevelled edges
    • Hand polished satin black
  5. Flow Designs - MK7 Golf R Flow-Lock Rear Diffuser

    VW MK7 Golf R Rear Valance & Flow-Lock Diffuser Fins Details: The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. All new diffuser fins featuring Flow-Lock interlocking integral assembly system allows installation without the need of tools or fasteners. No more double sided tape, nuts, bolts and "L" brackets. Strong, secure, easy installation. This part is only compatible with our new VW MK7R kit. Read More Kit Includes: 3x Flow-Lock Diffuser Fins (Left, Middle Right) Centre Valance with Flow-Lock channels 2 Flow Designs Stickers Fitting kit Material: Valance: 10mm thick polyethylene composite, bevelled edges Flow-Lock Diffuser Fins: 4.5mm thick textured ABS Finish: Valance: Hand polished satin black Flow-Lock Diffuser Fins: Scratch resistant textured ABS plastic Rear Spats sold separately. Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
    $306.00
  6. Flow Designs - VW MK7 Golf R Rear Valance & Fairing

    VW MK7 Golf R Rear Valance & Fairing Details: The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. Kit Includes: Centre Valance & Fairing 2 Flow Designs Stickers Fitting kit Material: Valance: 10mm thick polyethylene composite, bevelled edges Finish: Valance: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
    $249.00
  7. Flow Designs - MK7 Golf R Rear Pods/Spats V3 (Pair)

    DETAILS

    Protect your body work from scrapes or kerbing with our MK7 Golf R rear bumper spats/pods! All products in our core range are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.

    The pre-installed brass thread allow for installation of our MK7 Golf R adjustable rear winglets which are sold separately as a bolt-on accessory to suit our rear spats/pods.


    KIT INCLUDES

    • Rear spats/pods (pair)
    • 2 Flow Designs stickers
    • Fitting kit

    MATERIAL & FINISH

    • 10mm thick polyethylene composite, bevelled edges
    • Hand polished satin black
  8. Flow Designs - MK7 Golf R Front Lip Splitter Extensions (Pair)

    DETAILS

    Our adjustable front lip splitters extensions will bolt directly onto our MK7 Golf R front lip splitter thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

    The MK7 Golf R front splitter extensions are only compatible with Flow Designs MK7 R front lip splitter - designed to be an adjustable direct bolt-on accessory. 

    MK7 Golf R front lip splitter and MK7 Golf R front winglets sold separately. 


    KIT INCLUDES

    • Adjustable front extensions (pair)
    • 2 Flow Designs stickers
    • Fitting kit

    MATERIAL & FINISH

    • 4.5mm thick textured ABS 
    • Scratch resistant textured ABS plastic
    $89.00
  9. Flow Designs - MK7 Golf R Front Lip Splitter Winglets (Pair)

    Volkswagen MK7 Golf R Front Winglets (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. VW MK7 Golf R Front Winglets are only compatible with Flow Designs MK7 R front splitter only which is designed to be an adjustable direct bolt-on accessory. Adjustable anywhere between 5mm - 20mm on each side increasing the overall width up to 40mm. Can also be used in conjunction with MK7 Golf R front extensions (sold separately). Kit Includes: Front winglets (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic
    $69.00
  10. Flow Designs - MK7 Golf R Side Skirt Splitter Winglets (Pair)

    DETAILS

    Our adjustable side skirt splitter winglets will bolt directly onto our MK7 Golf R side skirt splitters thanks to the pre-pressed in threaded brass fittings on our side skirt splitters. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

    The MK7 Golf R side skirt splitter winglets are only compatible with Flow Designs MK7 R side skirt splitters - designed to be an adjustable direct bolt-on accessory. 

    MK7 Golf R side skirt splitter sold separately. 


    KIT INCLUDES

    • Adjustable side skirt splitter winglets (pair)
    • 2 Flow Designs stickers
    • Fitting kit

    MATERIAL & FINISH

    • 4.5mm thick textured ABS 
    • Scratch resistant textured ABS plastic
    $69.00
Set Descending Direction

   

Items 31 to 40 of 118 total

  1. 2
  2. 3
  3. 4
  4. 5
  5. 6