Volkswagen - Forge Motorsports - Turbosmart - H&R Springs - Integrated Engineering - XFORCE - Genuine VW - P3 Cars
EXPLORE WITH CONFIDENCE
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
KIT DETAILS
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
- 1X IE oiled 8 pleat density performance 5" filter
- 1X IE pre-filter intake sock
- 1X Air filter worm clamp
RECHARGING
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
COMPATIBLE INTAKES
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
- IEINCI11 - IE MQB 2.0T/1.8T Gen 3 Cold Air Intake
- IEINCK3 - IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
- IEINCG2A - IE Audi 3.0T Cold Air Intake For B8/B8.5 S4 & B8.5 S5
- IEINCN1 - IE Audi 3.0T Cold Air Intake For C7 A6 & A7
- IEINSG1 - IE Audi 3.0T Cold Air Intake For 8R SQ5 & Q5
- IEINCG1 - IE Audi 2.0T TSI Cold Air Intake For B8/B8.5 A4 & A5
- IEINCK1 - IE Audi B9 A4 & A5 Cold Air Intake
- IEINCW1 - IE Cold Air Intake System For VW MQB Tiguan 2.0T
- IEINCV1 - IE Performance Intake System For VW Atlas 2.0T
- IEINCC2 - IE 2.0T TSI Cold Air Intake For VW MK5, MK6 GTI, Jetta, CC & 8P A3
- IEINCB4 - IE 2.0T FSI Cold Air Intake Kit For MK6 Golf R, A3, MK5 GTI, Jetta
- IEINCC4 - IE Gen 3 2.0T/1.8T Cold Air Intake For 2013-2018 MK6 Jetta & GLI
- IEINCJ1 - IE Carbon Fiber Intake For Audi TTS MK2
- IEINCI4 - IE VW 1.4T Cold Air Intake For VW MK6 Jetta
Description
- Rotomold polymer for superior heat resistance
- Up to 19HP & 21ft-lbs over stock (with software)
- Flow 37% more than the factory airbox
- Flow 61% more than stock with IE turbo inlet
- Increased turbo & engine sounds
- Maximized turbo & engine efficiency
- Huge 5″ air filter for excellent laminar flow
- Integrated velocity stack for smooth airflow
- High pressure & low pressure air zones
- Designed for stock turbo and hybrids (with IE turbo inlet)
- Factory style mounts for reliable & easy installation
- All stainless hardware
- Multi-ply silicone with stop-flat edges
- High-quality clamps
- Powder-coated aluminum filter plate & velocity stack
- Stainless laser-etched logo plate
A special rotomold process is used to manufacture our premium polymer 3.0T intake airbox. This method leverages complex shapes and angles to maximize internal volume for air supply and smooth flow for a true performance design. This molding style also produces consistent wall thickness, strong corners, and superior heat resistance for a cost-friendly intake without compromises.
The entire intake is designed as a single-piece airbox to offer a seamless and complete look with an above factory quality fit and finish.
Our motorsport-designed velocity stack creates a smooth transition from the large filter area to the turbo inlet with excellent laminar properties. This uniquely engineered detail produces a high inertia flow with reduced drag and power-robbing turbulence.
Adding the optional cast turbo inlet upgrade further reduces significant air restrictions while maintaining the largest size possible from the airbox to the turbocharger. The intake and turbo inlet further increases airflow from 37% (intake only) up to a combined 61% over stock!
Turbo inlet pipe is an optional upgrade and can be purchased with your intake or added at a later date.
The intake and turbo inlet designs offer a straightforward and bolt-in job of available hybrid turbo upgrades. Our turbo-specific CNC-machined and o ring sealed adapters always maintain the largest size possible without introducing flow restrictions. Upgrading to a TTE or Pure Turbo hybrid is easy, simple, and hassle-free.
Hybrid turbo adapter rings are sold separately from the turbo inlet upgrade.
IE 3.0T INTAKE SYSTEM & TURBO INLET PIPE INSTALLED WITH TTE810 TURBO ON WORLD-RECORD 9-SECOND B9 S4
IE’s multi-zone intake design delivers all the performance benefits of an open-filter intake while maintaining protection from hot engine bay air from under the hood. A constant ram air supply is forced in from the grille inlet, while any additional air demands are supplied from the low-pressure zone through the filter plate louvers. This dual-zone approach ensures airflow demands for any power level, even the most extreme builds.
The byproduct of a true performance-designed intake is more than power. Our uniquely engineered velocity stack, pressure zones, and extensive internal volume also work together to release a myriad of turbo spools, engine throttle, and diverter blow-off sounds that transform your S4 or S5 with the under-hood acoustics of a genuine sports car.
3D scanning tools are leveraged to create a high-resolution digital environment. This technology allows IE engineers to use all available space for a complete performance design while ensuring a hassle-free fit and installation.
Our cost-effective intake without compromising quality or performance.
Install your new air intake using basic hand tools in no time. Our thermoplastic intake utilizes factory-style mounts that ensure a perfect and hassle-free fit.
Install time: 20 – 45 minutes
The IE Performance Air Intake System for your Audi B9/B9.5 SQ5 delivers significant airflow gains from a high-quality polymer design. Enjoy increased performance from dramatically improved turbo and engine efficiency while maintaining low intake air temps for up to 19HP & 21ft-lbs on tuned engines. Add instant power, sound, and fun without sacrificing style or quality with our premium air intake system for your S-class V6 turbocharged SUV.
REAL POWER
+19HP & 21TQ
WITH ECU TUNE
INTEGRATED
VELOCITY STACK
HIGH FLOW
LEADING FEATURES
- Rotomold polymer for superior heat resistance
- Up to 19HP & 21ft-lbs over stock (with software)
- Flow 24% more than the factory airbox
- Flow 50.4% more than stock with IE turbo inlet
- Increased turbo & engine sounds
- Maximized turbo & engine efficiency
- Huge 5" air filter for excellent laminar flow
- Integrated velocity stack for smooth airflow
- High pressure & low pressure air zones
- Designed for stock turbo and hybrids (with IE turbo inlet)
- Factory style mounts for reliable & easy installation
- All stainless hardware
- Multi-ply silicone with stop-flat edges
- High-quality clamps
- Powder-coated aluminum filter plate & velocity stack
- Stainless laser-etched logo plate
A special rotational molding method is used to manufacture a robust single-piece intake with consistent wall thickness, strong corners, and superior heat resistance. This also allows for complex shapes and angles to maximize internal volume for air supply and smooth flow for the most performance available. Enjoy a performance air intake without compromise.
The entire intake is designed as a single piece airbox to offer a seamless and complete look with an above factory quality fit and finish.
The built-in velocity stack creates a smooth transition from the large filter area to the turbo inlet. This motorsport design offers excellent laminar properties resulting in a very high inertia flow with reduced drag and power-robbing turbulence.
Our intake airbox is designed to accept our cast turbo inlet pipe to increase airflow over stock from 24% (intake only) up to 50.4% combined! Adding a turbo inlet further reduces significant air restrictions while maintaining the largest size possible from the airbox to the turbocharger.
Turbo inlet pipe is an optional upgrade and can be purchased with your intake or added at a later date.
The intake and turbo inlet combo makes upgrading to a hybrid turbo a simple bolt-in job. CNC-machined and o ring sealed adapter rings fit the stock or a variety of aftermarket turbos without hassle. The turbo inlet continually adapts to the turbo to not introduce any restrictions and maintain the largest size possible when upgrading turbos.
Hybrid turbo adapter rings are sold separately from the turbo inlet upgrade.
IE SQ5 POLY INTAKE SYSTEM & TURBO INLET PIPE INSTALLED WITH PURE750 TURBO
Multiple air supply avenues are used to guarantee airflow for any power level. High-pressure flow from the grille directly provides a ram air supply to the filter. If additional air demands are required, the intake will pull low-pressure air through the filter plate louvers as needed. This dual-zone design ensures your intake will never be a power limitation for even the most extreme builds.
Your stock airbox is manufactured under regulations to perform only one job; mute all engine and turbo sound at any performance cost. Your new IE poly intake system will release the sweet sounds of turbo spool, engine throttle, and diverter blow-off that your S-class SUV deserves.
3D scanning tools are leveraged to create a high-resolution digital environment allowing our engineers to take advantage of all available space for a complete performance design while ensuring a hassle-free install.
Sale
Introducing the NEW XFORCE Downpipe offering to suit Audi PFL RS3 8V 09/2015-12/2016.
Experience more performance from your Audi RS3 by bolting on our XFORCE Performance Exhaust Turbo Downpipe.
The turbo downpipe stainless steel pipe kit which is equipped with a high-flow cat to achieve maximum flow. Your Audi RS3 will come alive and demand attention!
Over 20 years of exhaust development and technical expertise have gone into creating the ultimate bolt-on performance downpipes, providing power increases throughout the rev range.
Dump-Pipe & Cat Kit
-
Features
- Stainless Steel
- Non Polished 3.5″ – 3″ pipe work
- Stainless Steel Flex Bellow
- 200 Cell Metallic High Flow Cat
- Additional Tuning pipe
- 3″ to Twin OEM size adaptor pipe
- Fitting kit supplied
Part No: |
ESRS315KITB |
Vehicle Model: |
RS3 |
Material: |
304 Stainless Steel |
COMPATIBLE
- AUDI RS3 8V PFL (2015-2016)
Regular Price:
$1,350.00
Special Price
$1,189.00
Sale
Features
Transform the driving experience of your Toyota GR Yaris with our ALL-NEW VAREX Valve equipped exhaust system; engineered to take your GR to the next level.
through our extensive development and testing process we’ve been able to strike the perfect balance between sound
and performance.Creating something very special for the giant killing Yaris GR.
The system uses our cutting-edge patented VAREX Valve technology, allowing you to switch from Street to Race mode using the remote control or optional SmartBox system which offers smartphone app control and delivers unrivalled customisation.
- 3″ cat back system in brushed 304 stainless steel
- Two Centre hot dog resonators with anti-resonance chamber
- Varex rear muffler with twin 2.5″ outlets
- Polished 4″ angle cut tips
Part No: |
ESTY21VKCS |
Vehicle Model: |
YARIS |
Diameter [in]: |
3 |
Material: |
304 Stainless Steel |
Regular Price:
$1,895.00
Special Price
$1,699.00
Description
Non-Polished Stainless Steel 3″ Cat Back System, Varex Rear Muffler With Tips
Features
- This exhaust system is designed to suit the SEDAN facelift model 2022-onwards
- 3″ Stainless steel pipe work
- Varex rear Muffler
- Cat Back system
- 3.5″ double wall tips
- Factory secondary cat converter is deleted
- Smartbox is NOT included
Description
3" Axle-Back Exhaust system
Features
KIA Cerato GT owners worldwide have fallen in love with Xforce Performance Exhaust systems for a reason.
The high-quality 304 stainless steel construction is built to look and sound amazing while lasting the distance for you to enjoy the miles in your Cerato GT. The high quality muffler provides a step up in terms of sound from the 1.6 Turbo engine.Experience the Enhanced exhaust sound,crackles & pops that KIA owners love,this Axle-back provides a step up in sound,upgrade to take your KIA Cerato GT to the next level.
- 3″ 304 Stainless steel Mandrel-Bent Pipework
- 3″ inlet – dual 2.5″ Outlet rear muffler
- Quad 3.5″ Double-Wall Slant-Cut Tips
- Straight-through Design for Maximum Performance and Sports Sound
- Fits seamlessly to the factory OEM KIA mounting points.
- All gaskets,Nuts & bolts included for fitment
- Fits KIA Cerato GT Sedan facelift 2022 onward only. For all hatch models use ESKC19AS
Sale
Description
3" 304 Stainless Steel Cat Back Exhaust System With Varex
Features
Give your VW Golf MK8 R the ultimate soundtrack with the XFORCE cat back exhaust system, complete with VAREX valve control.
Constructed of 304-grade stainless steel, the XFORCE high-flow 3” bore system and race-style rear muffler helps reduce exhaust gas pressure for enhanced performance, whilst the integrated VAREX exhaust valve gives you control over your exhaust volume, all from the touch of a button!
Not only do you get an exhaust system that lets you adjust how you your exhaust sounds, you also get enhanced looks too thanks to the brushed finish, precision TIG welds and a choice of 4” quad exhaust tailpipe trims.
- 3″ Brushed finish stainless steel pipe work
- Hot Dog resonator centre
- Drone reduction pipe
- Polished Varex R series rear muffler
- Quad 4″ polished stainless tip outlet
Regular Price:
$2,299.00
Special Price
$2,025.00
Sale
Description
Downpipe & cat kit
Features
Take your Subaru VB WRX to the next level of performance with the Xforce Downpipe. Crafted from high-quality stainless steel, this downpipe is designed to optimize exhaust flow, reduce back pressure, and increase horsepower and torque for an exhilarating driving experience.
Featuring a direct bolt-on design and a 200 cell high flow cat converter. The larger diameter of the downpipe allows for improved exhaust flow, helping to unleash the full potential of your WRX’s engine.
Upgrade your Subaru VB WRX with the Xforce Downpipe and experience the thrill of enhanced performance and power.
- 3.5″ reducing to 3″ after first bend
- 304 stainless steel
- Brushed finish
- 200 cell cat converter
- Only bolts to Xforce cat back system
Regular Price:
$925.00
Special Price
$815.00
Sale
Description
3" XFORCE Titanium cat back system with Burnt Blue Tips to suit Toyota Yaris GR
Features
TITANIUM IS HERE!
Transform the driving experience of your Toyota GR Yaris with our ALL-NEW TITANIUM Cat Back Exhaust System, engineered to take your GR to the next level.
The Titanium Toyota Yaris GR Cat-back system offers improved performance, amazing sound quality, and impressive weight savings of 4.5 kg below the OEM Toyota GR system. Both plain polished finish and burnt blue tip options are available.
These systems are limited in stock, so please contact us today to secure yours.
- 3″ Cat Back manufactured in 100% Titanium
- Centre hotdog resonator with anti-resonance chamber
- Dual Rear Muffler with Twin 2.5″ outlets
- Polished Burnt Blue 4″ Angle Cut Tips
- 4.5 kg weight saving over OEM Toyota GR system
- Fits to factory centre joint or bottom of downpipe to give you flexibility in choice
Regular Price:
$4,179.00
Special Price
$3,680.00