Volkswagen - IPE - IROAD - Integrated Engineering - Supernova - XFORCE - Genuine VW - Eibach - Flow Designs
Sale
Regular Price:
$769.00
Special Price
$692.00
Sale
REQUIRES AFTERMARKET INTAKE
Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes.
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.
TURBO INLET PIPE FEATURES
- Greatly improves air-flow to turbocharger
- Constant high-flow inner diameter
- Easy install, no modifications necessary
- Long life cast aluminum alloy
- In-house CNC machined for perfect fitment
- No leak o ring seal to turbocharger
- Outflows stock inlet by 110CFM
IS YOUR STOCK INLET ROBBING POWER?
The factory installed plastic turbo inlet found installed on your VW or Audi Gen 3 1.8T or 2.0T TSI engine is adequate enough for stock cars with factory hardware and ECU calibrations. However, the necked down design becomes a major flow restriction when ran with power upgrades such as cold air intakes, intercoolers, downpipes, and ECU upgrades.
UPGRADE YOUR TURBO INLET PIPE
The IE Turbo Inlet Pipe helps you to get the most out of your IS38 or IS20 turbo and power upgrades by removing the factory flow restriction. The cast aluminum design allows for a constant diameter elbow increasing efficiency from the intake to the turbo without the bottleneck design of the factory unit.
HORSEPOWER RESULTS
![](https://cdn.shopify.com/s/files/1/0054/2605/3231/files/stg2_inletpipe_dynos_grande.png?v=1558728398)
Dyno graph tested on a 2019 GTI with Stage 2 hardware & software on 93 octane
![IE MQB Turbo Inlet Pipe Flow Chart](https://cdn.shopify.com/s/files/1/0054/2605/3231/files/IEINCI10_MQB_TURBO_INLET_FLOW_RESULTS.jpg?v=1558560625)
EASY INSTALLATION
Your new turbo inlet pipe has been in-house CNC machined and includes all required hardware to allow for a perfect and easy installation. View and download the install guide here (coming soon).
REQUIRES AFTERMARKET INTAKE
Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes.
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.
VEHICLE APPLICATIONS
- Audi - A3 2015+ 8V 1.8T & 2.0T engines
- Audi - S3 2015+ 8V 2.0T engine
- Audi - TT 2016+ 8S 2.0T engine
- Audi - TTS 2016+ 8S 2.0T engine
- VW - Golf R 2015+ MK7 2.0T engine
- VW - GTI 2015+ MK7 2.0T engine
- VW - Golf/Alltrak 2015+ MK7 1.8T & 2.0T
- VW - Passat 2013+ B8 1.8T & 2.0T (EA888 Gen 3) engines
- VW - Tiguan 5N 2017+ 2.0T (EA888 Gen 3) engine
Regular Price:
$225.00
Special Price
$219.95
Sale
Whether your looking to save hundreds on highly priced dealer xenon globes or wanting more out of your xenon projector headlights, ATOM brings higher output, colour rendering index and colour temperature over traditional big brand xenon globes without the excessive price tag.
Regular Price:
$149.00
Special Price
$115.00
Sale
Description
No Coding, Direct Install
Get a unique sweeping / dynamic / sequential LED appearance by simply upgrading the LED module on your Golf Mk5 with our dynamic variant.
Made specifically for Mk5 Golf, incorporating the same socket as OEM for easy install, no further coding or modification needed.
Plug N Play – no coding needed
Easy 10 min install
No coding needed
All Tools Included
FITS
All VW Golf MK5 models 2003-2008 R32/GTI/GT/TSI/TDI
Does not fit VW Golf Mk6
Details
Shop Mk6 Mirror Lights Here
Shop Mk7 Mirror Lights Here
Regular Price:
$119.00
Special Price
$79.00
Sale
Description
Stainless Steel 3″ Cat Back Exhaust System
Features
This high-performance aftermarket exhaust component is designed to enhance the performance of your Golf MK6 R, MK5 R32, providing improved horsepower, torque, and a deeper, more aggressive exhaust tone. The Xforce cat back system is made from high-quality stainless steel and features mandrel-bent tubing for maximum exhaust flow, resulting in improved engine performance.
This Xforce cat back system is designed to be a direct bolt-on replacement for your factory exhaust component, making installation quick and easy. The precise fit and expert craftsmanship ensure that your Golf MK6 R will perform at its best, giving you the peak in performance and style.
- 304 stainless steel
- 3″ pipe work
- OE size adaptors
- Straight through centre resonator
- Straight pipe rear
- 4″ polished stainless steel clamp on tips
Regular Price:
$1,095.00
Special Price
$963.60
Sale
Eibach Sportline Sport Performance Springs
Pure Sport Suspension Springs and Appearance
Regular Price:
$493.00
Special Price
$444.00
W MK5 Golf R32 Front Splitter + Pre Mounted Aero Spacers
Kit Includes
Splitter(s)
2 Flow Designs Stickers
Fitting kit
Material
10mm Thick Polyethylene Composite, Bevelled edges
Finish
HAND POLISHED SATIN BLACK
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
VW MK5 Golf R32 Side Splitter
Kit Includes
Splitter(s)
2 Flow Designs Stickers
Fitting kit
Material
10mm Thick Polyethylene Composite, Bevelled edges
Finish
HAND POLISHED SATIN BLACK
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
VW MK5 Golf GTI Front Splitter + Aero Spacers
Kit Includes
Splitter(s)
Pre-mounted Adjustable Aero Spacers
2 Flow Designs Stickers
Fitting kit
Material
10mm Thick Polyethylene Composite, Bevelled edges
Finish
HAND POLISHED SATIN BLACK
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Regular Price:
$359.00
Special Price
$350.00
Volkswagen Scirocco PFL/FL Side Splitters (Pair)
Details:
Finish the aero styling of your Scirocco street project with Flow Designs splitter set, complete with front & side splitters, rear spats & rear valance. The set fits facelift & prefacelift bumpers, with a guarantee of impact resistance on all splitters. Fast Australian & international delivery!
Kit Includes:
Side splitters (pair) to suit pre-facelift and facelift Scirocco R
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.