Description:
For the ultimate driving experience, you need the connection directly at your fingertips. Leyo Motorsport understands that when it comes to perfecting the exit of an apex, gear changes need to be precise and fluently timed. Welcome to the greatest addition and interior modification for you performance vehicle, the Leyo Motorsport Aluminium paddle shifters. Made from 6061 billet aluminium, these shift extensions will be the classiest addition to your interior yet. Available in multiple finishes and coated with a hard anodized finish, Leyo Motorsport have truly delivered on our most in-demand product., Leyo Motorsport endeavours to get you the purest driving experience by manufacturing products that are race proven with durability in mind. Order today and pursue your very own ultimate driving experience.
Specifications:
OPEN
REMOVE
INSTALL
DONE
Description:
This MQB Cold Air Intake System for the 2.0T engine guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
Made with high grade full aluminum 3.5’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance
This newly designed intake can be used as both a closed or an open intake kit. Specially designed heat shield prevents heat soak, effectively extracting colder induction air.
Installation is simple and straight forward, no fabrication required.
Specifications:
OEM fitment requires no fabrication.
3.5’inch diameter for greater air induction.
Unique quality and design.
Track and dyno proven for greater horsepower gain.
Direct bolt on & easy installation.
Open or closed intake design.
Description:
Looking dull in the engine bay? Want to spice it up a bit? Get your beloved MK5 GTI the bad ass 21st century look with the Leyo Motorsport MK5 GTI Cold Air Intake System.
Fabricated from high grade aluminum (very important, as many on the market use steel) this intake kit is lighter (again, vs steel) and less prong to heat soak (again… steel).
As this kit is compatible with the Golf MK6 Golf R, one day when you decide to level up to the 6R, you can pop your beloved Leyo intake right into the 6R’s engine bay
(don’t show the fellow that sold you the 6R too soon as he might want his car back).
*This product is only for use on the race track.
OEM fitment requires no fabrication.
Unique quality and design.
Track and dyno proven for greater horsepower gain.
Direct bolt on & easy installation.
Easy installation.
Intake Heat shield.
Replace your restrictive factory airbox with this new airbox from Leyo Motorsport. Meticulously engineered, this final design is the culmination of numerous air flow rendering and analysis.
High flow air filter ensures maximum air flow eliminating the air flow restrictions found in the stock airbox. More air means more usable power especially when paired with Leyo charge pipe for the MK7 1.4.
Installation is simple and straightforward, in just minutes your engine bay will be transformed with the addition of this Leyo intake kit.
*This product is only for use on the race track.
Specifications:
Track and dyno proven for greater horsepower gain.
Maximum airflow.
Unique quality and design.
Simple installation.
Description:
We take our most popular extension to date, throw in some innovation, throw in some creativity and voilà, honey I've vanished my paddle extension!
A world first, paddle shift extension that is transparent. See your dashboard unobstructed through the clear extension as well as the glow of the cabin lighting and you might for a split second think they are not even there.
Clear your mind as you blast down the racetrack; Clear your thoughts as you cruise along the coastline; Clear the clutter in front of you, Clear Extension, a first by Leyo Motorsport.
Specifications:
Presenting you the new Leyo Motorsport Double Cone high flow air filter. These performance air filter has an inverted filtration cone on the top to greatly increase filtration surface. It is available in 3” inlet. With the increased filtration surface, the engine no longer needs to gasp for air after you have mod your ride. Filtration surface is made from nonwoven fabric providing superior filtration.
*This product is only for use on the race track.
High airflow with superior filtration.
Clamp on design for easy installation.
Top inverted filtration cone for maximum air flow.
For MK5 GTI / MK6 R cold air intake system replacement.
FILTER DIMENSIONS
More air comes in, more air goes out, and so the flow of energy from your turbo should not be wasted. The OEM turbo muffler is just that, a wasteful restrictive part hiding the true potential of your street or track weapon. Leyo Motorsport has in-house researched and developed its very own one piece design turbo muffler delete eliminating that inefficiency from the OEM part. Leyo Motorsport have created something special that allows greater throttle response, more aggressive power and that beautiful turbo spool in one stylish 6061 billet aluminium product. Finished in hard anodized coating, the Leyo Motorsport turbo muffler delete is the perfect companion to any engine enthusiast seeking more power.
To see the difference the Leyo Motorsport turbo muffler delete can have on your pride and joy. Be sure you are quick to order as demand is currently through the firewall.
Specifications:
Designed by Leyo and tested by the Leyo Motorsport team HQ.
Unique trumpet design for optimal flow and sound.
Machined to 0.01mm tolerance with Japanese laser technology.
Includes dual o-ring seals for prolonged turbo life.
Gain power and torque across the entire rpm range with no loss in turbo spool time with a true motorsport designed intake manifold for your VW or Audi 2.0T FSI EA113 & TSI EA888 Gen1/2 engine. The IE 2.0T Intake Manifold has been carefully designed to provide an effective power increase across the entire rpm range with no loss in low-end power or spool time with the ability to be used on any turbo setup, including the stock turbo. This manifold completely replaces the factory failure prone and restrictive plastic manifold with a high-performance USA cast aluminum part that will look amazing, last the life of the vehicle, and add more power!
Designed specifically for each individual application, IE Intake Manifold Install Kits are complete with all hardware necessary to install your new IE 2.0T cast intake manifold. These kits including all needed brackets to fasten OEM lines and components, as well as couplers to plumb the valve cover breather, vacuum connections, and throttle body. Verify the correct install kit for your vehicle below before ordering.
2.0T FSI (EA113) TRANSVERSE KIT FITMENT
2.0T FSI (EA113) LONGITUDINAL KIT FITMENT
2.0T TSI (EA888 GEN 1 & GEN 2) TRANSVERSE KIT FITMENT
2.0T TSI (EA888 GEN 1 & GEN 2) LONGITUDINAL KIT FITMENT
The IE 2.0T Intake Manifold is a true performance designed intake manifold and requires specific tuning to the ECU software to take advantage of the larger plenum volume, runner size, resonance tuning, and velocity stacks to gain the power increase. Simply bolting the manifold on your existing ECU tune is unlikely to gain the optimum power available. Additionally, installing the IE manifold will remove the factory plastic manifold's runner flaps. Removing the runner flaps will cause a check engine light (CEL) and possible rough cold starts, especially in cold weather. Your manifold tune must turn off the runner flap codes to remove the CEL and re-tune the warm-up maps to accommodate for the cold starts. Please ensure your ECU tuner can provide you with manifold software before purchasing.
Vehicle specific manifold tunes are available from IE for certain cars with more being added in the future. See below for a list of available software tunes.
IE manifolds are cast from a special self-aging, self-hardening alloy with especially strict requirements for chemical composition. Top of the line Japanese machining centers machine all major surfaces of the parts in one setup, ensuring a perfect fit, finish, and maximum value. The aluminum manifold makes a great replacement for the stock plastic unit, which is a common failure point.
Dramatic power and torque increases come from making small changes to the runner and velocity stack design. Our engineers have precisely tuned runner length, diameters, and resonance tuning. The IE manifold is the only manifold on the market featuring flow tested velocity stacks that have been optimally tuned for large power increases throughout the entire RPM band. The end result is the best performing intake manifold optimized specifically for 2.0T engines.
The plenum on this manifold has been generously sized and shaped to distribute airflow as evenly as possible to all 4 cylinders. The 2.4L internal volume is a massive improvement over the factory piece and ensures a steady supply of air for the engine.
We have carefully engineered and tested this intake manifold in-house to get the best results possible in any condition. Using the latest in Computational Fluid Dynamics (CFD) software, our engineers have optimized the manifold's airflow and power range for virtually any turbocharger. Even on smaller turbos such as VW/Audi K04 turbos, there are significant power and torque increases throughout the entire rpm range, with no loss in low-end power or spool time. What that means for you is an incredible increase in the driving experience with a bolt-on performance product, with truly no downsides. Larger power gains are to be seen on big turbo setups as well, with a manifold that is tuned for the natural powerband of the 2.0T engines from 3000-7500rpm.
With further careful tuning of the runner diameter and length, the IE manifold provides an optimal balance of power gains throughout the entire powerband with no loss in spool time or low-end power. Even on both smaller and larger turbo setups, the manifold will typically result in no added turbo lag.
The Integrated Engineering 2.0T performance intake manifold has been carefully designed to fit many 2.0T FSI/TSI (EA113 & EA888 gen1/gen2) engines while retaining all of your factory components. Through extensive research and development, this intake manifold fits with no modifications to the engine bay, charge piping, vacuum system, emissions systems, fuel system, or coolant system. To make the intake manifold install as painlessly as possible, individual install kits are available separately. Check the Fitment tab to find the install kit for your vehicle.
To complement the impressive performance of the manifold design, IE engineers have taken special care to make a visually appealing piece that not only compliments but enhances the look of any engine bay. The beautiful USA cast aluminum surface is powder coated with a satin black finish then all surfaces and ports are machined for an impeccable contrast. The easy to clean powder coat will ensure the manifold stays looking nice for a lifetime. The top of the manifold features an in-house CNC machined black anodized aluminum velocity port cover that looks amazing in any engine bay.
Unlike other manifolds on the market that are simply welded or cast with larger plenums and made to fit on the car, IE's performance intake manifolds receive special treatment from start to finish. Our engineering department looks at each specific application and designs an intake manifold with a properly sized runner and plenum. Then we begin a series of prototyping and testing countless revisions to the design to ensure optimum performance. Our engineers use Computational Fluid Dynamics (CFD) software to optimize the runner and velocity stack (bellmouth) system for proper resonance tuning and airflow. Unlike competitor manifolds, we use this process on each manifold to design the application-specific runner system to maximize airflow delivery to the cylinders.
Once the manifold has been designed and flow has been optimized, the 3D models head over to our 3D printing studio to manufacture the initial prototype. The 3D printed manifold is fastened onto our in-house engine dynamometer and in-house chassis dynamometer for testing. To validate the plenum, runner, and bellmouth design, we test each revision in a controlled environment. Once all the testing data has been collected, it is analyzed and used to determine if changes are necessary before going into production.
Each runner is ready for individual water/methanol injection nozzles. The cast and pre-drilled and threaded 1/8" NPT ports located on each runner will make installing your water/meth setup easy. For builds not using water/methanol injection, you can simply block off the ports using the provided black plugs. This requires a 1/8" thread "elongated" nozzle to use with our manifold. These nozzles are manufactured by Aquamist and available through aquamist-direct.com for purchase.
Requires vehicle specific install kit for complete installation.
VW & Audi - 2.0T FSI EA113 Engines
VW & Audi - 2.0T TSI EA888 Gen 1/2 Engines
*Does not fit B8/B8.5 A4 & A5 2.0T TSI engines with 5th injector factory aluminum intake manifolds.
*Fits VW & Audi 2.0T FSI EA113 and TSI EA888 Gen 1/2 engines only, does not fit MK7/MQB EA888 Gen 3 engines.
Regular Price: $769.00
Special Price $692.00
Struggling with the OEM Turbo Valve? Need to add that unique boost pressure sound? Make sure to get your hands on All New Re-Designed Leyo Motorsports latest in-house designed Diverter Valve. Leyo Motorsport Diverter Valve multi piece design is built and engineered to solve the failure issues associated with the OEM solenoid valves and their diaphragm resulting in boost leaks. It is built from 6061 Billet Aluminum with hard coated Anodized finish with an internal serviceable piston based design that provides greater reliability over the OEM as well as quicker throttle and turbo response. All components are made in-house by Japan CNC’s, inspected to 0.01mm tolerance by Japan CMM, laser etched and race proven.
Leyo Motorsport Diverter vavle has a unique and fully tested internal piston compared with other brands in order to get the maximum results in power. We are offering a stronger, more durable and reliable valve compared to the OEM unit. We do have uprated valve spring in stock that is sold separately.
Specifications:
Made from the highest quality T6061 billet aluminium construction.
Direct OEM replacement..
Improved throttle response
Consistent turbo boost.
Reduced turbo lag .
Fully compatible with OE electronics.
Fully serviceable piston .
Holds up to 600HP. (with optional uprated spring kit)
* Note : This DV kit comes supplied with BLACK / WHITE / YELLOW Spring. Uprated BLUE / RED Spring is Available for purchase.