IE’s cold air intake has been obsessively engineered for performance first using professional motorsport practices and computational flow dynamic software. The result is a uncompromising intake system that sounds and performs for the street or track with a sophisticated and sporty design.
Currently Shopping by
-
Brands:
Integrated Engineering
XFORCE
- Price: Remove This Item $30.00 - $1,000.00
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Volkswagen - Integrated Engineering - XFORCE
IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style
DESCRIPTION
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.Most Stage 2+ software tunes are compatible with this kit.
Product Details
- Made in house at CTS Turbo in Canada
- Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
- OEM-spec honing and tolerances
- Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
- Nitride coated for long-lasting OEM looking finish
- Includes belt and bolts required for install
- Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
- 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
- 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
- Late Audi Q7 with 3.0T SUPERCHARGED engine
$359.00
IE Audi 3.0T Cold Air Intake | Fits C7 A6 & A7 (2010 - 2018)
EASY INSTALL
BOLT-ON DESIGN
NO MODIFICATIONSADDS HORSEPOWER
UP TO +21HP
ON TUNED ENGINESFLOW OPTIMIZED
VELOCITY STACK
MOTORSPORT DESIGNPOWER UP
Introduce a jump in power to your 3.0T supercharged engine in under an hour with peak gains of 15-20+HP/TQ on tuned engines.
HIGH-FLOW VELOCITY STACK
Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.
DESIGN FEATURES
ULTIMATE AIR FLOW
Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE’s intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds FANTASIC too!
QUALITY COMPONENTS
The multi-piece heat shield not only looks great, but it built to perform by effectively channeling cold air from the front of the car to the massive air filter. The location, shapes, and angles of the heatshield are no accident, these are all designed to protect the intake from hot air surrounding the engine bay.
EXACT FIT
This Intake fits Audi C7 A6 & A7 3.0T V6 Supercharged engines without any modifications or hassles. The install process is simple and can be done quickly with basic tools. IE intakes utilize the factory airbox mounts ensures a perfect and long-life fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.
VEHICLE FITMENT GUIDE:
MAKE MODEL YEAR ENGINE AUDI
A6
2010-2018 (C7/C7.5)
3.0T Supercharged
AUDI
A7
2010-2018 (C7/C7.5)
3.0T Supercharged
Regular Price: $702.00
Special Price $689.00
IE Harsh Climate 5" Oiled Air Filter & Sock Upgrade Kit
EXPLORE WITH CONFIDENCE
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
KIT DETAILS
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
- 1X IE oiled 8 pleat density performance 5" filter
- 1X IE pre-filter intake sock
- 1X Air filter worm clamp
RECHARGING
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
COMPATIBLE INTAKES
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
- IEINCI11 - IE MQB 2.0T/1.8T Gen 3 Cold Air Intake
- IEINCK3 - IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
- IEINCG2A - IE Audi 3.0T Cold Air Intake For B8/B8.5 S4 & B8.5 S5
- IEINCN1 - IE Audi 3.0T Cold Air Intake For C7 A6 & A7
- IEINSG1 - IE Audi 3.0T Cold Air Intake For 8R SQ5 & Q5
- IEINCG1 - IE Audi 2.0T TSI Cold Air Intake For B8/B8.5 A4 & A5
- IEINCK1 - IE Audi B9 A4 & A5 Cold Air Intake
- IEINCW1 - IE Cold Air Intake System For VW MQB Tiguan 2.0T
- IEINCV1 - IE Performance Intake System For VW Atlas 2.0T
- IEINCC2 - IE 2.0T TSI Cold Air Intake For VW MK5, MK6 GTI, Jetta, CC & 8P A3
- IEINCB4 - IE 2.0T FSI Cold Air Intake Kit For MK6 Golf R, A3, MK5 GTI, Jetta
- IEINCC4 - IE Gen 3 2.0T/1.8T Cold Air Intake For 2013-2018 MK6 Jetta & GLI
- IEINCJ1 - IE Carbon Fiber Intake For Audi TTS MK2
- IEINCI4 - IE VW 1.4T Cold Air Intake For VW MK6 Jetta
$129.00
IE Air Intake System For Audi B9/B9.5 SQ5 3.0T
The IE Performance Air Intake System for your Audi B9/B9.5 SQ5 delivers significant airflow gains from a high-quality polymer design. Enjoy increased performance from dramatically improved turbo and engine efficiency while maintaining low intake air temps for up to 19HP & 21ft-lbs on tuned engines. Add instant power, sound, and fun without sacrificing style or quality with our premium air intake system for your S-class V6 turbocharged SUV.
ONE-PIECE
POLYMER
DESIGNREAL POWER
+19HP & 21TQ
WITH ECU TUNEINTEGRATED
VELOCITY STACK
HIGH FLOWLEADING FEATURES
- Rotomold polymer for superior heat resistance
- Up to 19HP & 21ft-lbs over stock (with software)
- Flow 24% more than the factory airbox
- Flow 50.4% more than stock with IE turbo inlet
- Increased turbo & engine sounds
- Maximized turbo & engine efficiency
- Huge 5" air filter for excellent laminar flow
- Integrated velocity stack for smooth airflow
- High pressure & low pressure air zones
- Designed for stock turbo and hybrids (with IE turbo inlet)
- Factory style mounts for reliable & easy installation
- All stainless hardware
- Multi-ply silicone with stop-flat edges
- High-quality clamps
- Powder-coated aluminum filter plate & velocity stack
- Stainless laser-etched logo plate
ROTOMOLD POLYMER
A special rotational molding method is used to manufacture a robust single-piece intake with consistent wall thickness, strong corners, and superior heat resistance. This also allows for complex shapes and angles to maximize internal volume for air supply and smooth flow for the most performance available. Enjoy a performance air intake without compromise.
SEAMLESS DESIGN
The entire intake is designed as a single piece airbox to offer a seamless and complete look with an above factory quality fit and finish.
BUILT-IN VELOCITY STACK
The built-in velocity stack creates a smooth transition from the large filter area to the turbo inlet. This motorsport design offers excellent laminar properties resulting in a very high inertia flow with reduced drag and power-robbing turbulence.
OPTIONAL TURBO INLET
Our intake airbox is designed to accept our cast turbo inlet pipe to increase airflow over stock from 24% (intake only) up to 50.4% combined! Adding a turbo inlet further reduces significant air restrictions while maintaining the largest size possible from the airbox to the turbocharger.
Turbo inlet pipe is an optional upgrade and can be purchased with your intake or added at a later date.HYBRID TURBO READY
The intake and turbo inlet combo makes upgrading to a hybrid turbo a simple bolt-in job. CNC-machined and o ring sealed adapter rings fit the stock or a variety of aftermarket turbos without hassle. The turbo inlet continually adapts to the turbo to not introduce any restrictions and maintain the largest size possible when upgrading turbos.
Hybrid turbo adapter rings are sold separately from the turbo inlet upgrade.IE SQ5 POLY INTAKE SYSTEM & TURBO INLET PIPE INSTALLED WITH PURE750 TURBO
MULTIPLE PRESSURE ZONES
Multiple air supply avenues are used to guarantee airflow for any power level. High-pressure flow from the grille directly provides a ram air supply to the filter. If additional air demands are required, the intake will pull low-pressure air through the filter plate louvers as needed. This dual-zone design ensures your intake will never be a power limitation for even the most extreme builds.
PERFORMANCE SOUND
Your stock airbox is manufactured under regulations to perform only one job; mute all engine and turbo sound at any performance cost. Your new IE poly intake system will release the sweet sounds of turbo spool, engine throttle, and diverter blow-off that your S-class SUV deserves.
PRECISION DESIGN
3D scanning tools are leveraged to create a high-resolution digital environment allowing our engineers to take advantage of all available space for a complete performance design while ensuring a hassle-free install.
$899.00
Drive Mode Activation for VAREX Smartbox
OEM Drive Mode Factory Control 3 pin PWM to VAREX Smartbox.
Are you looking to add a little more control and customization to your Varex equipped exhaust system? Look no further! We are excited to announce the release of our Drive Mode feature for our Varex Smartbox controller unit.
This feature will allow you to control your Varex equipped exhaust system from the OEM Drive Mode vehicle controls, making it easier and more convenient than ever before.$30.00
XFORCE - KIA Cerato GT Sedan 2022-On Axleback Exhaust System
Description
3" Axle-Back Exhaust system
Features
KIA Cerato GT owners worldwide have fallen in love with Xforce Performance Exhaust systems for a reason.
The high-quality 304 stainless steel construction is built to look and sound amazing while lasting the distance for you to enjoy the miles in your Cerato GT. The high quality muffler provides a step up in terms of sound from the 1.6 Turbo engine.Experience the Enhanced exhaust sound,crackles & pops that KIA owners love,this Axle-back provides a step up in sound,upgrade to take your KIA Cerato GT to the next level.
- 3″ 304 Stainless steel Mandrel-Bent Pipework
- 3″ inlet – dual 2.5″ Outlet rear muffler
- Quad 3.5″ Double-Wall Slant-Cut Tips
- Straight-through Design for Maximum Performance and Sports Sound
- Fits seamlessly to the factory OEM KIA mounting points.
- All gaskets,Nuts & bolts included for fitment
- Fits KIA Cerato GT Sedan facelift 2022 onward only. For all hatch models use ESKC19AS
$850.00
XFORCE - Subaru VB WRX Turbo Exhaust Downpipe With Hi flow Catalytic Converter
Description
Downpipe & cat kit
Features
Take your Subaru VB WRX to the next level of performance with the Xforce Downpipe. Crafted from high-quality stainless steel, this downpipe is designed to optimize exhaust flow, reduce back pressure, and increase horsepower and torque for an exhilarating driving experience.
Featuring a direct bolt-on design and a 200 cell high flow cat converter. The larger diameter of the downpipe allows for improved exhaust flow, helping to unleash the full potential of your WRX’s engine.
Upgrade your Subaru VB WRX with the Xforce Downpipe and experience the thrill of enhanced performance and power.
- 3.5″ reducing to 3″ after first bend
- 304 stainless steel
- Brushed finish
- 200 cell cat converter
- Only bolts to Xforce cat back system
Regular Price: $925.00
Special Price $815.00
XFORCE - BMW G80 M3 G82 M4 Black Tips
Description
Matt Black 4″ Tips
Features
This tip part number contain 4 tips in the box.
- Bolt on 4″ outlet tips
- Matte black coating
- Laser etched XFORCE logo
- 304 Stainless steel
- Bolt on 4″ outlet tips
- To suit XFORCE VAREX BMW M3/M4 G80 G82 Cat-Back System ESBMG80VKCS
$340.00
XFORCE - KIA Cerato GT Axle Back Exhaust System
Features
KIA Cerato GT owners worldwide have fallen in love with Xforce Performance Exhaust systems for a reason.
The high-quality 304 stainless steel construction is built to look and sound amazing while lasting the distance for you to enjoy the miles in your Cerato GT. The high qualitymuffler provides a step up in terms of sound from the 1.6 Turbo engine. Experience the Enhanced exhaust sound, crackles & pops that KIA owners love, this Axle-back provides a step up in sound, upgrade to take your KIA Cerato GT to the next level.
- 3″ 304 Stainless steel Mandrel-Bent Pipework
- 3″ inlet – dual 2.5″ Outlet rear muffler
- Quad 3.5″ Double-Wall Slant-Cut Tips
- Straight-through Design for Maximum Performance and Sports Sound
- Fits seamlessly to the factory OEM KIA mounting points.
- All gaskets, Nuts & bolts included for fitment
- Fits Cerato GT (2019-2021), GT Hatch (2019-on), GT HATCH (2022-on), GT Sedan (2019-2021). For 2022 onward sedan use ESKC22AS
$850.00
XFORCE - Kia Cerato GT Sedan Black Tips
Description
Matte Black quad 4" tips
Features
Add the finishing touch of personalization to your KIA Cerato GT with our Matte Black coated 4″ outlet tips. The tips are supplied with the 304 stainless steel clamps and fit seamlessly to the Xforce catback system and provides a premium look to the rear of the KIA Cerato GT.
- Matte Black with etched Xforce logo
- Both left & right tips
- 4″ outlets
- 304 stainless steel
- Clamp on for Xforce system
$210.00
Copyright © 2021, VW Central, All Rights Reserved
SAFE & SECURE SHOPPING
