Currently Shopping by
-
performance:
Cooling
Diverter Valves
Exhaust
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Volkswagen
CTS B-COOL BILLET OIL FILTER HOUSING 2.0T FSI Fits VW Golf MK5 GTI / Golf 6R / Audi S3 8P / MK2 TTS & TT-RS
CTS Turbo is proud to release our B-Cool Billet Oil Filter Housing. The OE plastic filter housing is quite fragile and is know to become brittle and crack over time. Each CTS Turbo B-Cool Billet Oil Filter Housing is constructed in house from T6061 Aluminum. Not only does the B-Cool filter look good, but it works great. We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.
Installation is very straight forward and only required basic hand tools:
Drain oil from filter housing, use a 36mm socket to remove the factory oil filter housing, install new filter, install new filter housing o-ring to CTS housing, reinstall on the car and tighted to 18 ft/lbs, refill engine oil.
Product Details:- Made in Canada from billet T6061 Aluminum
- Hard anodized black for stealth and longevity (machined finish shown)
- Uses OEM O-ring
- Installation of CTS-HW-0242 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
- OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
- Compatible with OEM Filter
The CTS B-Cool Billet fits Audi, VW, Seat, Skoda models with EA113 2.0T FSI engines, 2.5L 5-cylinder engines and 2.5T 5-cylinder turbo engines.
This part replaces the OE part# 06D 115 408B and 07K 115 408.
Fitment:
- MK6 Golf R, MK5 GTI (FSI), 8P Audi A3 (FSI), MK2 Audi TT-S (FSI)
- MK5 and MK6 Golf, Jetta 2.5 5-cylinder
- 8P Audi RS3 (not for facelift model)
- MK2 Audi TT-RS (not for facelift models)
$129.00
LEYO - HIGH FLOW TURBO INLET PIPE
Description:
The higher the boost, more fuel and air is needed. To solve the issue with turbo lag, we’ve created our own designed Leyo Motorsport turbo inlet pipe. This full aluminium piece increases the reliability and unrestricted airflow direct to your turbocharger. With Leyo Motorsport’s research and developers, we’ve manufactured what we believe to be one of our best and most important performance product, the Leyo Motorsport turbo inlet pipe. More air being sucked into your turbo will allow horsepower gains not seen from OEM units. We’ve enhanced the size of the inlet pipe to give better throttle response, more linear power feed, and more leeway when tuning your performance vehicle.
Be sure you’re quick to order as demand is currently through the wastegate.
Specifications:
-
Full aluminium tubing.
-
CNC Aluminum OEM neck for secure fitment.
-
Fits all Air Intake system on the market.
-
Smooth, more linear power gains.
-
Larger than the OEM unit for increased air flow.
-
Simple installation.
-
Powder coated & laser etched logo.
-
Race Track Proven.
$199.00-
XFORCE - VW Golf R MK6 Cat Back System with Varex Rear Muffler
FEATURES; Polished stainless steel 3″ pipe work Straight through sports muffler Varex Muffler with twin outlet Twin 4″ tipsRegular Price: $1,699.00
Special Price $1,444.15
XFORCE - VW GOLF MK6 R / AUDI S3 8P - 3" STAINLESS STEEL DUMP PIPE & CAT
Description
3.5″ to 3" Dump pipe, to OEM cat back with 100 cell metallic cat in Stainless Steel
Features
This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.
The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential.
Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.
- 3.5″ dump pipe reduced to 3″
- Flex bellows before hanger
- 100 cell high flow performance catalytic converter
- Designed to fit to factory cat back systems
- Requires ECU tuning
Fits the following;
- Audi 8P S3
- Audi 8P A3 2.0T
- Golf MK6 R
Part No: ES-VW07-KITB Vehicle Model: A3, GOLF R, S3 Diameter [in]: 3 Material: Stainless Steel Regular Price: $1,000.00
Special Price $850.00
XFORCE - VW Golf R MK6 R Full Turbo Back Exhaust System with Varex Rear Muffler
FEATURES; Polished stainless steel 3″ pipe work Straight through sports muffler Varex Muffler with twin outlet Twin 4″ tips DUMP-PIPE & CAT KIT 3" Stainless Steel Dump Pipe and 100-cel CatRegular Price: $2,600.00
Special Price $2,210.00
XFORCE - VW GOLF R MK6 (10/2009-08/2013) Turbo Exhaust Downpipe With Hi-Flow Racing Catalytic Converter (Fit XFORCE Cat-back System Only)
Description
3.5″ to 3" Dump pipe with 100 cell metallic cat in stainless steel fits to Xforce cat back system
Features
This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.
The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential. While exclusively working with an Xforce cat back system.
Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.
- 3.5″ dump pipe reducing to 3″
- Flex bellows before hanger
- 100 cell high flow cat
- 3″ connector pipe with resonator
- Fits to Xforce cat back system
Regular Price: $1,100.00
Special Price $935.00
VW GOLF R MK7 & MK7.5 2013- 3" STAINLESS STEEL Downpipe w/ Catalytic Converter OR CAT BYPASS (DE-CAT)
COMPATIBLE WITH FACTORY VW CATBACK SYSTEMS
Brand: XForce Exhaust Product Code: ES-VW09-KITB Shipping: Usually ships in 1-3 days Regular Price: $1,200.00
Special Price $1,020.00
XFORCE - VW GOLF R MK 7 2013- 3" STAINLESS CATBACK EXHAUST SYSTEM
Brand: XForce Exhaust Product Code: ES-VW09-VMKSB-CBS Shipping: Usually ships in 1-3 days Regular Price: $2,299.00
Special Price $1,954.15
VW Golf MK7 R - iPE Valvetronic Catback Exhaust System
iPE Innotech revolutionizes the Hot-Hatch-Segment with an exhaust system completely made from stainless steel, for the new VW Golf R MK7.
This extremely durable, performance increasing and valve-controlled system brings your new Golf R more than only an exclusive touch.Our premium-class exhaust system has larger pipes in diameter and an optimized exhaust flow, leading to more performance and improved torque and response.
The system comes standard with chrome silver tips. Different colour tips are available from the drop-down menu.
Please note if you have an MK7.5 Golf R - The link pipe to the muffler is different to the MK7 Golf R.
Regular Price: $4,716.00
Special Price $4,008.60
XFORCE Full 3" Stainless Steel Turbo Back - VW MK7 R
Brand: XForce Exhaust Product Code: ES-VW09-VMKSB-CBS Shipping: Usually ships in 1-3 days Regular Price: $3,499.00
Special Price $2,974.15
SAFE & SECURE SHOPPING
