CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
Fitment:
The high-quality 304 stainless steel construction is built to look and sound amazing while lasting the distance for you to enjoy the miles in your Forte GT. The high quality muffler provides the ultimate sound from the 1.6 Turbo engine. Experience the Enhanced exhaust sound, crackles & pops that KIA owners love, this cat-back provides the ideal sound and performance upgrade to take your KIA Cerato GT to the next level.
CTS Turbo is proud to release our B-Cool Billet 3.0T Oil Filter Housing. The OE plastic filter housing is quite fragile and is know to become brittle and crack over time. Each CTS Turbo B-Cool Billet 3.0T Oil Filter Housing is constructed in house from T6061 Aluminum. Not only does the B-Cool filter look good, but it works great. We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil. Installation is very straight forward and only required basic hand tools.
Product Details:
The CTS B-Cool Billet 3.0T Oil Filter Housing fits Audi 3.0T equipped models such as B8 & B8.5 S4, A6 etc.
Weight | 2 lbs |
---|---|
Dimensions | 6 × 6 × 6 in |
Generation
Make | Model | Year | Generation |
---|---|---|---|
AUDI | A6 | 2005 - 2011 | C6 |
AUDI | A6 | 2012 - 2017 | C7 |
AUDI | A7 | 2012 - 2017 | C7 |
AUDI | S4 | 2010 - 2016 | B8/8.5 |
AUDI | S5 | 2008 - 2017 | B8/8.5 |
Regular Price: $129.00
Special Price $99.00
Your car deserves the performance, sound, and quality from an intake system that reflects the Audi S trim as a true performance machine. IE's engineers took a "no expense spared" approach to design the ultimate intake system solution that delivers on looks, fit, and most importantly -power!
PERFORMANCE TESTING
No part of this intake design is by accident, every inch is engineered and tested for performance first. Countless revisions undergo dyno testing, flow bench, and real-world use to maximize potential. As a result of this testing, the massive air filter, built-in velocity stack, large internal volume, ram air inlet, and bottom plate louvers ensure the intake supplies more than enough airflow across the entire powerband for any ECU tune or turbo setup.
CARBON FIBER - MORE THAN STYLE POINTS
In order to maximize airflow, a large internal volume is required to support the necessary amount of flow for the engine. Carbon fiber construction allows our engineers to create complex shapes and angles that just can not be achieved with sheet metal bends. This design style utilizes every millimeter available in oddly shaped modern engine bays for a very large air supply and smooth delivery. The finished product results in a performance design with a stylized high-end look for your engine bay.
UNIQUE SOUND
You drive a flagship S model Audi with a 6 cylinder turbocharged engine -make it sound like one!
The factory intake kills any and all engine sound to meet requirements for everything but fun. By upgrading to an IE intake system, you are taking full advantage of a performance design including the turbocharger spool, engine throttle, and diverter valve sounds that come along with it. The unique velocity stack and bottom louver design create a tuned engine note that sounds classy, yet powerful at the same time. This level of sound is not heard through other brand closed box intakes and is a much more refined sound than found with open element style intakes. Get ready to sing the song of power!
SEAMLESS DESIGN
The only fully carbon 1-piece intake design on the market offers more than a fantastic look alone. This reduces the chances of air leaks from an airbox/air duct joint, finicky installs, rubbing noises, or parts working loose over time while also providing an easier install. Furthermore, this is a complete all-inclusive intake system that does not require any additional parts sold separately to complete the intake.
EASY INSTALLATION
This Intake fits Audi B9 S4 & S5 3.0T V6 Turbocharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allow for natural engine movement which keeps intake components from getting damaged.
HIGH-FLOW VELOCITY STACK
By incorporating a professional motorsport style velocity stack into the airbox design, airflow is channeled from the large internal airbox volume into the turbocharger as quickly as possible. The bellmouth shape creates a very high inertia flow from the massive filter with very low drag or power-robbing turbulence.
MULTIPLE PRESSURE ZONES
Engineered to support any power level, the intake takes advantage of multiple air supply avenues. The front large air inlet receives outside high-pressure flow from the front of the grille and acts as a ram air design for the majority of the air supply. Additionally, the bottom plate louvers pull extra required air as needed from the low-pressure zone under the intake. These dual zones provide an unrestricted supply of air across the entire filter and ensure your intake will never be a power limiter for even the most extreme builds.
PRECISION FIT
To ensure a perfect fit, 3D scanning tools are used to create a digital duplicate of the vehicle's engine bay, grille, bumper, and hood. This provides an incredibly high-resolution environment to reverse engineer and prototype the intake design. This not only allow engineers to take advantage of all available room but also results in a perfect and extremely high-end install.
QUALITY COMPONENTS
No flimsy parts or quality sacrifices found here! Only the best materials and design features were used for a top-tier look, fit, function, and long-life reliability.
Regular Price: $1,894.00
Special Price $1,749.00
6-Inch Bell Mouth Cold Air Intake V1.1
Introduction
We are excited to introduce you to our first of many Hyundai I30n bolt-on upgrade parts. Hyundai has outdone themselves with the I30 n, and we are eager to push the limits of this amazing, extremely underrated car. Our aim for our Hyundai i30 n development program is to deliver high-performing parts and intelligent design to provide aftermarket capability with OEM quality. Our team are incredibly passionate about creative and innovative design while maintaining practicality, taking pride in our ability to achieve a flawless fit and finish, time after time. We have put a lot of time into planning our parts development program for the I30 n, with modular integration of future parts already designed into this 6-Inch Bell Mouth Cold Air Intake, The largest available for the Hyundai I30 n. We are in the final stages of finishing three new products for the I30 n, with many more in the planning and early development stages.
Benefits of Fitting a Cold Air Intake
Colder air, better noises, more power
Regular Price: $629.00
Special Price $549.00
Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles
Buy a set of 4 Now!
Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles
Buy a set of 4 Now!
Regular Price: $196.00
Special Price $189.00
Forge Motorsport were the OG’s of this original groundbreaking design, and we still lead the marketplace with customer service and after care with this innovative blow off valve - Often copied never bettered
This is our piston version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CHHC, CZPA, CJXB and CJXC;US codes CPLA and CPPA) including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition!
Not only do you get the famous Forge blow off valve sound but this valve also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on tuned engines and modified vehicles.
Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp!
This valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.
⭐ Great product! Fits perfect and sounds beautiful! 10/10 ⭐
⭐ Fitted the blow of valve today! Works and sounds perfect, not to mention the great customer service to make sure I ordered the correct one ⭐
⭐ Easy installation and sounds fantastic! Money well spent ⭐
In The Box:
1 x FMDVMK7A Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker
Regular Price: $399.00
Special Price $350.00