GTI/GTD - Forge Motorsports - Turbosmart - H&R Springs - Integrated Engineering - XFORCE - Genuine VW - Eibach - Flow Designs
H&R Lowering Springs - Golf MK8 GTI
Lowering Levels:
Front 40mm
Rear 40mm
Enhance the look of your vehicle with H&R Lowering Springs. H&R Sport Springs provide a lower center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing sport springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.
Sporty look and performance
Progressive spring characteristics
Less weight by using high tension steel
TUV approved
Sale
Description:
Eibach Sportline is an extremely powerful spring system that has been specially designed for enthusiastic motor sports fans who are looking for racing car performance for the road with minimal loss of comfort and maximum driving quality. You achieve ultimate driving dynamics by particularly sporty lowering of the vehicle centre of gravity and by precisely designed, progressive spring rates. Thanks to the lower vehicle centre of gravity, the Sportline sport suspension springs also reduce building up when accelerating, the rolling tilt of the body during cornering and immersion when braking. For Sportline springs, we strongly recommend the use of sports shock absorbers. The Bilstein sport shock absorbers are ideal for this.
Eibach Part: E20-85-051-05-22
Range: Sportline
Front Lowering: 20-30mm (Max front axle load: 1170kg)
Rear Lowering: 20mm (Max rear axle load: 930kg)
Axle: Multi-Link Axle, for all standard damping systems
Regular Price:
$602.00
Special Price
$542.00
Sale
Product Description:
Eibach’s Pro-Kit Lowering Springs (E10-85-051-05-22) are an essential upgrade component to your vehicles suspension & chassis setup. Please carefully check compatibility, any pre-requisites for suspension setups (including front & rear axle load and electronic dampening setups). Motorsport has always been one of Eibach’s core competencies and the testing ground for numerous innovations. Eibach’s passion for precision is what racing enthusiasts worldwide appreciate.
Technical Information
Eibach Part: E10-85-051-05-22
Range: Pro-Kit
Front Lowering: 15-20mm (Max front axle load: 1070kg)
Rear Lowering: 10mm (Max rear axle load: 930kg)
Axle: Multi-Link Axle, for all standard damping systems
Regular Price:
$580.00
Special Price
$522.00
Sale
- World's leading Performance Suspension Spring System
- Engineered and tested to work perfectly with stock dampers
- First step towards a complete sport suspension system
- Lower center of gravity ? lowers vehicle up to 40 mm
- Lowering = Traction + Attraction
- Progressive spring design
- Performance handling
Regular Price:
$515.00
Special Price
$464.00
- World's leading Performance Suspension Spring System
- Engineered and tested to work perfectly with stock dampers
- First step towards a complete sport suspension system
- Lower center of gravity ? lowers vehicle up to 40 mm
- Lowering = Traction + Attraction
- Progressive spring design
- Performance handling
DESCRIPTION
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
- Made in house at CTS Turbo in Canada
- Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
- OEM-spec honing and tolerances
- Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
- Nitride coated for long-lasting OEM looking finish
- Includes belt and bolts required for install
- Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
- 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
- 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
- Late Audi Q7 with 3.0T SUPERCHARGED engine
Sale
Eibach PRO-KIT Performance Springs
World‘s leading Performance Suspension Spring System
Regular Price:
$633.00
Special Price
$570.00
Sale
Eibach PRO-KIT Performance Springs
World‘s leading Performance Suspension Spring System
Regular Price:
$844.00
Special Price
$760.00
Sale
Introducing the NEW XFORCE Downpipe offering to suit Audi PFL RS3 8V 09/2015-12/2016.
Experience more performance from your Audi RS3 by bolting on our XFORCE Performance Exhaust Turbo Downpipe.
The turbo downpipe stainless steel pipe kit which is equipped with a high-flow cat to achieve maximum flow. Your Audi RS3 will come alive and demand attention!
Over 20 years of exhaust development and technical expertise have gone into creating the ultimate bolt-on performance downpipes, providing power increases throughout the rev range.
Dump-Pipe & Cat Kit
-
Features
- Stainless Steel
- Non Polished 3.5″ – 3″ pipe work
- Stainless Steel Flex Bellow
- 200 Cell Metallic High Flow Cat
- Additional Tuning pipe
- 3″ to Twin OEM size adaptor pipe
- Fitting kit supplied
Part No: |
ESRS315KITB |
Vehicle Model: |
RS3 |
Material: |
304 Stainless Steel |
COMPATIBLE
- AUDI RS3 8V PFL (2015-2016)
Regular Price:
$1,350.00
Special Price
$1,189.00
Sale
Features
Transform the driving experience of your Toyota GR Yaris with our ALL-NEW VAREX Valve equipped exhaust system; engineered to take your GR to the next level.
through our extensive development and testing process we’ve been able to strike the perfect balance between sound
and performance.Creating something very special for the giant killing Yaris GR.
The system uses our cutting-edge patented VAREX Valve technology, allowing you to switch from Street to Race mode using the remote control or optional SmartBox system which offers smartphone app control and delivers unrivalled customisation.
- 3″ cat back system in brushed 304 stainless steel
- Two Centre hot dog resonators with anti-resonance chamber
- Varex rear muffler with twin 2.5″ outlets
- Polished 4″ angle cut tips
Part No: |
ESTY21VKCS |
Vehicle Model: |
YARIS |
Diameter [in]: |
3 |
Material: |
304 Stainless Steel |
Regular Price:
$1,895.00
Special Price
$1,699.00