GTI/GTD - Turbosmart - Integrated Engineering - Supernova - T-carbon - VW Central - Whiteline - Ingo Noak
PRODUCT FEATURES
- Eliminates excessive play from OE rubber bushings
- Greatly Reduces chances of missed shifts
- CNC machined in-house for precise fitment
- Bronze inner bushing to provide smooth pivoting without wear
PRODUCT DETAILS
Say goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!
Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.
FITMENT
- VW - Golf R 2012-2012 (MK6) 6 speed transmisison
- VW - GTI 2009 (MK5) 6 speed transmisison
- VW - GTI 2010-2014 (MK6) 6 speed transmisison
- VW - Rabbit 2008-2009 (MK5) 5 speed transmisison
- VW - Jetta 2008-2009 (MK5) 5 speed transmisison
- VW - Jetta GLI 2008-2009 (MK5) 6 speed transmisison
- VW - Jetta GLI 2010-2014 (MK6) 6 speed transmisison
- VW - Jetta GLI 2014-2016 (MK6.5) 6 speed transmisison
Sale
MODERN UPDATED STYLING – ERROR FREE – NO CODING
Specifically for VW Golf Mk6
Regular Price:
$149.00
Special Price
$99.00
Sale
Regular Price:
$599.00
Special Price
$519.00
Sale
NEW VARIANT UPDATE - V5.1
-Wider Indicator Illumination
-Deeper Amber Indicator Colour
-Dual Fog and Reverse light function
-Increased Diffusion; More Consistent, Less Harsh Indicator Brightness
If we're being honest, the stock Golf 6 halogen tail lights leave a lot to be desired in terms of aesthetics. Get a defined and modern look with these easy install, no coding required LED tail lights for your golf 6.
Features
- No Coding Required
- Fits all Golf 6 models - TSI/TDI/R/GTI/GTD
- 100% LED - Standard LED tail lights utilise Halogen globes for Reverse - Fog - Turn Signal
- Super Bright Sequential turn signal functions on inner + outer tail light
- Right Hand Drive and Left Hand Drive configurable
- Dual Reverse, Dual Fog Light
![](https://media.giphy.com/media/XrbRxK99zNk086oMdC/giphy.gif)
(red variant pictured for illustration. This listing is for black style)
Regular Price:
$599.00
Special Price
$469.00
Sale
WHAT'S INCLUDED
LED Tail Lights – Black (4)
Canbus decoders (4)
Socket adaptors to fit halogen tail light equipped cars (4)
Inner tail light indicator bridge wire (2)
Regular Price:
$599.00
Special Price
$459.00
Description
This listing is for the IE POWERlink Flash Tool only.
You may also purchase this cable with IE performance tunes for your vehicle (sold separately).
POWER IN THE PALM OF YOUR HAND
Add serious power and fun to your car without popping the hood! The IE POWERlink V4 Flash Cable is the key to uploading IE engine-specific tuning upgrades to your ECU, Simply plug into your vehicles OBD2 port and launch the app on your Apple or Android phone (or Windows laptop). Enjoy serious horespower, torque gains, increased acceleraton, faster 0-60 times, optimized drivability, improved responsiveness, multiple octanes, enthusiast drive mapping and more in only minutes!
- Uploads IE Performance Tunes (sold separately)
- Apple & Android mobile flashing app (supported platforms)
- Flashes engine & transmission tunes
- Direct OBD2 vehicle flashing in only minutes
- Customizable live gauge display (Mobile)
- Octane and feature switching (varies by platform)
- Upgrade tune stages for matching hardware
- Return to 100% stock programming at anytime
- Read and Clear diagnostic codes
- Check and clear emissions monitors
- Data-logging (Windows 10+ laptop)
Would rather use a laptop? No problem! IE Flash Wizard Software allows the IE POWERlink Tool to communicate with your vehicle’s ECU to flash software tunes, upgrade, update, data log, or read/write codes on any Windows 10+ powered laptop or tablet.
DEVICE |
PORTS |
OS |
PROC. |
POWER |
RAM |
|
|
|
|
|
|
NOTE: Mobile flashing app requires an IE V4 POWERlink flashing cable and is not compatible with older V3 serial number units. Have a V3 and ready to go Mobile? Simply purchase a new V4 POWERlink to gain full mobile functionality.
Sale
The Integrated Engineering MK5/MK6 FDS intercooler system was built from the ground up to offer the ultimate in performance for your vehicle. When increasing the power output of your engine it is extremely important to ensure it has the proper cooling to match. It packs a very large intercooler core into the space available, a full 54% larger than the OEM core. This large core delivers cool air to the engine under all circumstances, increasing power and torque and simultaneously reducing heat soak.
Regular Price:
$1,899.00
Special Price
$1,769.00
Sale
The IE MK6 Golf R Cold Air Intake Kit is the perfect intake upgrade for your engine bay. Benefits include added horsepower and torque, perfect MAF scaling, improved throttle response, and increased turbo noise. Peak gains are generally 10 Horsepower and Torque.
Regular Price:
$799.00
Special Price
$719.96
Sale
One of the most common failures on the 2.0T FSI engine is the factory pressure-relief valve. These valves are in place to recirculate crankcase gases into the intake manifold once they open. Although this works fine for a few thousand miles, they begin to leak over time and cause boost to go past the valve into the valve cover. This not only causes an oily mess in the engine bay from crankcase pressure, but a rough idle, fuel economy decline and boost loss. With boost pressure far below where it should be, it is common to notice significant power losses and poor drivability.
Regular Price:
$184.00
Special Price
$179.00
Update the look of your ugly stock plastic valve cover to a show-ready one piece machined billet aluminum IE valve cover on your 2.0T FSI (EA113) engine!
PRODUCT DETAILS
IE billet aluminum valve covers for the 2.0T FSI EA113 (timing belt driven) engines are a direct replacement for your factory valve cover for a clean updated look over the stock plastic valve cover. Designed as a perfect solution for a show-ready look or the base for your custom catch can project.
MACHINED DESIGN
Machined in-house from a solid block of aircraft grade aluminum for an attractive one piece design with a matching oil filler cap to finish off the look. The IE billet valve cover is machined to accept the factory valve cover gasket, so there is no worry of oil leaks.
FOR USE WITH CUSTOM CATCH CAN SETUPS ONLY
This valve cover design completely removes the factory PCV breather setup and will require a custom catch can kit or breather setup. IE complete catch can kits for the billet valve cover are available separately for select models (located in required hardware tab). To make setting up a custom breather or catch can kit easy, this valve cover features a single -10an breather outlet providing a simple start for a variety of fittings or hose ends. The breather outlet is located above an integrated baffle system to reduce oil escaping the breather outlet. These baffles are hand welded into the valve cover, ensuring they will not fail or fall into the cylinder head.
PRODUCT FEATURES
- Replaces factory plastic valve cover
- Uses factory valve cover gasket
- In-house CNC machined from aluminum
- Includes o ring sealed matching billet oil cap
- -10AN breather outlet for catch can setups
ADDITIONAL PARTS REQUIRED
EVAP CROSSOVER TUBE RELOCATION KIT
The factory plastic valve cover has an integrated evap line crossing through the center of the valve cover. The IE billet valve cover does not have this vacuum line running through the center, and requires The IE Evap Crossover Tube Relocation Kit. This kit includes everything needed to re-run the EVAP line hiding it away for a stealthy look. IE Part Number: IEBAVC11
CATCH CAN KIT FOR BILLET VALVE COVER
The IE billet valve cover replaces the factory breather setup for a single -10AN breather outlet requiring you to run a custom catch can kit setup. IE has taken the leg work out of piecing together a catch can kit for transverse mounted 2.0T FSI engines commonly found in VW MK6 Golf R, MK5 GTI, Jetta, GLI and Audi MK2 TT, TTS, and A3 among others. This catch can kit includes everything you need to completely install the IE billet valve cover breather system. IE Part Number: IEBACC3
VEHICLE FITMENT
- Audi - A4 2005-2008 (B7) 2.0T FSI (EA113) engines
- Audi - A6 2005-2011 (C6) 2.0T FSI (EA113) engines
- Audi - A6 Allroad 2005-2011 (C6) 2.0T FSI (EA113) engines
- Audi - TT 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines*
- Audi - TTS 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines
- Audi - A3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines*
- Audi - S3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines
- VW - GTI 2006-2009 (MK5) 2.0T FSI (EA113) engines*
- VW - Golf R 2012-2012 (MK6) 2.0T FSI (EA113) engines
- VW - Jetta & Jetta GLI 2006-2010 (MK5) 2.0T FSI (EA113) engines*
- VW - Passat 2006-2010 (B6) 2.0T FSI (EA113) engines*
- VW - EOS 2006-2015 (1F7) 2.0T FSI (EA113) engines*
*This billet valve cover will only work on early model 2.0T EA113 engines. You can verify your the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1/Gen2 TSI engine and is not compatible with billet valve covers.