GTI/GTD - CTS Turbo - OSIR - Turbosmart - Integrated Engineering
Description
- Rotomold polymer for superior heat resistance
- Up to 19HP & 21ft-lbs over stock (with software)
- Flow 37% more than the factory airbox
- Flow 61% more than stock with IE turbo inlet
- Increased turbo & engine sounds
- Maximized turbo & engine efficiency
- Huge 5″ air filter for excellent laminar flow
- Integrated velocity stack for smooth airflow
- High pressure & low pressure air zones
- Designed for stock turbo and hybrids (with IE turbo inlet)
- Factory style mounts for reliable & easy installation
- All stainless hardware
- Multi-ply silicone with stop-flat edges
- High-quality clamps
- Powder-coated aluminum filter plate & velocity stack
- Stainless laser-etched logo plate
A special rotomold process is used to manufacture our premium polymer 3.0T intake airbox. This method leverages complex shapes and angles to maximize internal volume for air supply and smooth flow for a true performance design. This molding style also produces consistent wall thickness, strong corners, and superior heat resistance for a cost-friendly intake without compromises.
The entire intake is designed as a single-piece airbox to offer a seamless and complete look with an above factory quality fit and finish.
Our motorsport-designed velocity stack creates a smooth transition from the large filter area to the turbo inlet with excellent laminar properties. This uniquely engineered detail produces a high inertia flow with reduced drag and power-robbing turbulence.
Adding the optional cast turbo inlet upgrade further reduces significant air restrictions while maintaining the largest size possible from the airbox to the turbocharger. The intake and turbo inlet further increases airflow from 37% (intake only) up to a combined 61% over stock!
Turbo inlet pipe is an optional upgrade and can be purchased with your intake or added at a later date.
The intake and turbo inlet designs offer a straightforward and bolt-in job of available hybrid turbo upgrades. Our turbo-specific CNC-machined and o ring sealed adapters always maintain the largest size possible without introducing flow restrictions. Upgrading to a TTE or Pure Turbo hybrid is easy, simple, and hassle-free.
Hybrid turbo adapter rings are sold separately from the turbo inlet upgrade.
IE 3.0T INTAKE SYSTEM & TURBO INLET PIPE INSTALLED WITH TTE810 TURBO ON WORLD-RECORD 9-SECOND B9 S4
IE’s multi-zone intake design delivers all the performance benefits of an open-filter intake while maintaining protection from hot engine bay air from under the hood. A constant ram air supply is forced in from the grille inlet, while any additional air demands are supplied from the low-pressure zone through the filter plate louvers. This dual-zone approach ensures airflow demands for any power level, even the most extreme builds.
The byproduct of a true performance-designed intake is more than power. Our uniquely engineered velocity stack, pressure zones, and extensive internal volume also work together to release a myriad of turbo spools, engine throttle, and diverter blow-off sounds that transform your S4 or S5 with the under-hood acoustics of a genuine sports car.
3D scanning tools are leveraged to create a high-resolution digital environment. This technology allows IE engineers to use all available space for a complete performance design while ensuring a hassle-free fit and installation.
Our cost-effective intake without compromising quality or performance.
Install your new air intake using basic hand tools in no time. Our thermoplastic intake utilizes factory-style mounts that ensure a perfect and hassle-free fit.
Install time: 20 – 45 minutes
Sale
Dual port boost tap allows for multiple boost references
CNC machined from 6061 Aluminium
Brass plug included
Regular Price:
$89.95
Special Price
$79.95
Sale
MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015)
8V Audi A3/S3 (up to production date Sept 27, 2015)
MK3 Audi TT/TT-S (up to production date Sept 27, 2015)
Regular Price:
$79.95
Special Price
$65.00
T304 Seamless Stainless Steel tubing
-T304 Stainless Steel flanges
-100% TIG Welded
-T304 Stainless Steel 02 bung-Stainless Steel Clamps
-200 Cell Catalytic converter
-Great Sound even with factory exhaust, no drone!!
Mandrel bent aluminum piping with durable black powder coating
- CNC machined MAP flange
- 4 Ply silicon connectors with stainless steel clamps
- Integrated water methanol bung with plug
- Stainless steel clamps
Audi - S1 EA888 Gen 3 - 2.0 TFSI
Audi - A3 & S3 (MK3) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI
Audi - A4 / Allroad (B8 & B8.5) - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - A5 (B8 & B8.5) - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - A6 (C6 & C7) - EA888 Gen 2 - 2.0 TFSI
Audi - Q5 - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - TT / TTS (MK3) - EA888 Gen 3 - and 2.0 TFSI
VW - Golf / GTI / R (MK7) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI
At CTS Turbo we are proud to announce our new air intake system for the VW MK7 & MK7.5 Golf/GTI, MK7 & MK7.5 Golf R and facelift Audi A3/S3 is ready! This is the largest intake available, and it is excellent for tuned vehicles that require the extra air flow.
The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system. Air then flows through our 3.5" high flow air filter, which utilizes an inverted cone design for maximum engine breathing. Our 3.5" CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air directly into the the engine, minimizing turbulence from unnecessary connections. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.
Peak power gains range from 10-15HP on an otherwise stock vehicle. We recommend disabling your Soundaktor (noise amplifier) to fully enjoy the true sound of your motor and remove excessive drone caused by the device.
Product Details:
- Mandrel bent large bore 3.5" aluminum piping with black powder coating
- Coveted Laser etched //CTS Turbo logo
- 3.5" Reusable air filter with inverted cone design
- 4 Ply silicon connectors with stainless steel clamps
- Sealed air box
- Bracketry to prevent rattling under engine torquing
- Billet SAI breather adapter and filter (Optional in drop down menu)
Fitment:
- 2014+ VW Golf (all models)
- 2014+ VW GTI
- 2014+ VW Golf R
- 2018+ Audi A3 (all models)
- 2018+ Audi S3
NOTE: If you have a Golf, GTI or A3 you will require the SAI breather adapter and filter. Only for vehicles WITHOUT a MAF sensor.
CONFIRM ON YOUR CAR BEFORE ORDERING!
DESCRIPTION
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler.
Product Details:
60mm aluminum piping with CTS logo
5-ply silicon coupler
Factory mounting points are used for perfect fitment
Durable black powdercoat finish
For 7-speed DSG/S-tronic transmissions only
Compatible with factory and upgraded turbos
Compatible with factory and upgraded intakes
Compatible with factory and upgraded intercoolers
Parts Included:
Upper turbo outlet silicon
Lower turbo outlet pipe
2 clamps
Installation hardware
Fitment:
2018+ VW Golf R DSG 7-speed
2019+ VW GLI DSG 7-speed
2019+ VW GTI DSG 7-speed
2018+ Audi A3 S-Tronic 7-speed
2018+ Audi S3 S-Tronic 7-speed
2018+ Audi TT, TT-S S-Tronic 7-speed
NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275
Sale
We are proud to announce the release of our premium ball-bearing hybrid turbo with stainless steel exhaust housing for 2015+ MQB platform vehicles.
This high-performance hybrid turbo was designed by CTS engineers to fulfill the demand from customers who desire a direct-bolt-on turbo for their existing IS12, IS20 or IS38 turbocharger. Instead of trying to stuff a CHRA from a Mitsubishi into a factory housing; we re-designed and cast our proprietary STAINLESS STEEL exhaust housing to accommodate a larger turbine wheel. The compressor cover was also custom made and profiled to accept a very popular TD06 Billet compressor wheel, this ensures the turbocharger can reliably handle 30+ PSI. We upgraded the CHRA to a dual-ball bearing which is made from heat-resistant ceramic. Finally, we finished the assembly by balancing it on a VSR high-speed balancer.
This is a brand new turbocharger; no core or long wait times are required. Simply swap over your actuator and turbo outlet fitting for installation. Software tuning is required and it is available from most tuners.
Features:
- Complete brand new turbocharger; no need for core to be sent it or purchased
- Dual ceramic ball bearing direct-fit CHRA (compatible with all factory oil and coolant lines)
- Billet MHI-style TD06 compressor wheel
- High performance 9 blade turbine wheel
- Stainless steel turbine housing
- VSR Balanced to exceed OE tolerances
- Compatible with most tuning solutions for hybrid turbos (United Motorsport, Eurodyne, COBB)
- Compatible with OE or replacement wastegate actuators (CTS-WGA-200 actuator recommended)
- Compatible with OE or aftermarket turbo inlets and turbo outlets
Fitment:
- 2015+ VW Golf/Sportwagen/Alltrack
- 2015+ VW GTI
- 2015+ VW Golf R
- 2019+ VW Jetta GLI
- 2018+ VW Arteon
- 2015+ Audi A3
- 2015+ Audi S3
- 2015+ Audi TT
- 2015+ Audi TTS
NOTE: Always follow the proper procedure for checking/adjusting the wastegate actuator when installing the turbo! Always replace engine oil.
Gaskets, wastegate actuator, turbo outlet fitting not included.
Regular Price:
$2,999.00
Special Price
$2,399.00
The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold.
The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.
