CTS Turbo is proud to announce an official release of our new K04 Upgrade for 2.0T FSI/TSI Transverse Engines.
Our engineers designed the compressor cover and exhaust housing to work with the larger K04 CHRA, exactly how intended. While other manufacturers simply install a larger K04 CHRA into a small factory-spec housing.
Beware of these hybrid builds, they are not made to provide optimal flow for the larger turbine wheel and can lead to poor performance and premature failure.
High-quality castings are CNC machined to replace your factory turbocharger and do not require any additional parts to be installed. All you need to run this K04 2.0T FSI/TSI Transverse Turbocharger Upgrade is a tune for your ECU and a performance downpipe.
This kit is by far the best ‘bang for the buck’ modification available for VW and Audi enthusiasts with the 2.0T FSI and 2.0T TSI engine. With proper tuning and supporting mods, this turbo will support 350HP/360TQ!
Features:
CTS-spec K04 CHRA with heavy-duty thrust bearings
Billet compressor wheel (MFS – machined from solid)
K04-specific compressor and turbine housing. NOT A HYBRID!
OEM+ manufacturing tolerances
VSR high-speed balanced
Direct-fit factory replacement
OEM installation kit included
Compatible with any K04-specific tune
Compatible with factory turbo outlet pipe (both FSI and TSI). Not compatible with aftermarket stock turbo outlet pipes
ROW vehicles, please confirm fitment with your CTS Turbo dealer.
Additional parts required:
K04-specific software tuning
CTS Turbo or other performance downpipe
Additional parts recommended:
CTS Turbo Cold Air Intake
CTS Turbo Direct-Fit Intercooler Kit
CTS Turbo High Flow Turbo Outlet Pipe (EA888 only)
S3 Fuel Injectors and HPFP upgrade (EA113 engines only)
After years of request we delivered the first MK6 sequential tail lights to market in 2018. Working directly with a well established manufacturer we specified a great product and obtained southern hemisphere distribution rights. Despite the popularity we were not 100% satisfied with the quality. Today we go rogue, bringing an entirely new mould with edge to edge turn signal illumination and many small improvements to deliver the best version yet.
V5 brings a new ground up design, making it the largest improvement to date.
Deeper amber indicator/turn signal Dual Reverse, Dual Fog Light, RHD + LHD support -V5.1 update Wider indicator/turn signal illumination – edge to edge Reduced moisture ingress Stronger electrical sockets Solid metal canbus decoder – improved thermal cooling, rock solid design Improved weather sealing – Harsh Aussie climate tested, Snow to 45cº
TREND SETTING.
Buy with confidence and get the latest variant. Beware of off the shelf V1.0 non edge to edge designs.
LIGHT OUTPUT EXCEEDS OEM BRIGHTNESS IS ACHIEVED BY DARKENING INTERNALS AND MAINTAINING A CLEAR OUTER LENS FOR MAXIMUM LIGHT TRANSMISSION.
NEW VARIANT UPDATE - V5.1
-Wider Indicator Illumination
-Deeper Amber Indicator Colour
-Dual Fog and Reverse light function
-Increased Diffusion; More Consistent, Less Harsh Indicator Brightness
If we're being honest, the stock Golf 6 halogen tail lights leave a lot to be desired in terms of aesthetics. Get a defined and modern look with these easy install, no coding required LED tail lights for your golf 6.
Features
No Coding Required
Fits all Golf 6 models - TSI/TDI/R/GTI/GTD
100% LED - Standard LED tail lights utilise Halogen globes for Reverse - Fog - Turn Signal
Super Bright Sequential turn signal functions on inner + outer tail light
Right Hand Drive and Left Hand Drive configurable
Dual Reverse, Dual Fog Light
(red variant pictured for illustration. This listing is for black style)
VERSION 5.0, GOING ROGUE.
After years of request we delivered the first MK6 sequential tail lights to market in 2018. Working directly with a well established manufacturer we specified a great product and obtained southern hemisphere distribution rights. Despite the popularity we were not 100% satisfied with the quality. Today we bring an entirely new mould with edge to edge turn signal illumination and many small improvements to deliver the best version yet.
V5.0 brings a new ground up design, making it the largest improvement to date
Deeper amber indicator/turn signal
Wider indicator/turn signal illumination – edge to edge
Reduced moisture ingress
Stronger electrical sockets
Solid metal canbus decoder – improved thermal cooling, rock solid design
Details:
Complete the aero stying of your VW MK6 Golf GTI with the rear valance and Flow-Lock diffuser fins from Flow Designs. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong.
Kit Includes:
Rear valance (pair)
Flow-Lock diffuser fins x6
2 Flow Designs stickers
Fitting kit
CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.
Material:
Valance: 10mm thick polyethylene composite, bevelled edges
Flow-Lock Diffuser Fins: 4.5mm thick textured ABS
Finish:
Valance: Hand polished satin black
Flow-Lock Diffuser Fins: Scratch resistant textured ABS plastic
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Use of ABS Plastic
Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.
Please note you are receiving a special price when you purchase the MK6 R complete splitter set.
The Flow Designs splitter set is the best exterior mod for your VW MK6 Golf R! With front & side splitters & rear valance with Flow-Lock diffuser fins, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
We also have packages that include our MK6 R bolt on accessories range.
MK6 GOLF R LIP SPLITTER KIT INCLUDES:
MK6R V3 front splitter & Aerospacers
MK6R V3 side Splitters (Pair)
MK6R Flow-Lock Rear Diffuser
MK6R V3 rear spats (Pair)
2 Flow Designs stickers
Fitting kit
ADD:Rear Window Vents, Spoiler Extension &/or Fire Extinguisher Bracket/Mount if desired
MK6 GOLF R LIP SPLITTER KIT MATERIAL & FINISH:
Front splitter, side splitters, diffuser, rear spats: 10mm thick polyethylene composite, bevelled edges
Hand polished satin black
Flow-Lock fins and rear valance: scratch resistant textured ABS plastic
CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.
Window Vents: 4.5mm scratch resistant textured ABS plastic, CNC engraved logo and features
Rear Spoiler Extension: 4.5mm scratch-resistant reversible textured (Top) with hi-gloss acrylic underside, CNC engraved logo and features
Fire Extinguisher Bracket/Mount: 3mm Stainless Steel, Powder-coated Texture Black
HOW STRONG ARE OUR SPLITTERS?
FAQ
HOW IS YOUR SPLITTER SO STRONG?
Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper.
WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS?
Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!)
WHAT ABOUT CARBON FIBRE?
As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable.
USE OF ABS PLASTIC
Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.
Protect your bumper from scrapes or kerbing with our MK6 Golf GTI front lip splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
MK6 GTI front lip splitter extensionsandMK6 GTI front wingletssold separately.
Protect your body work from scrapes or kerbing with our MK6 Golf GTI side skirt splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.
Installation is simple withpre-drilled holes so there is no guesswork. We have machined out a pocket for the OEM Golf side skirt to sit snug into - this way our side skirt splitters will mount up flush with the stock body kit once installed on the car.
We also have designed other visual prompts to show where the side skirt splitter aligns with the OEM side skirt and Golf GTI chassis.
The pre-installed brass thread allow for installation of our MK6 Golf GTI adjustable side winglets which are sold separately as a bolt-on accessory to suit our side skirt splitters.
PLEASE NOTE: MK6 Golf GTI Side Winglets are sold separately
MK6 GOLF GTI SIDE SKIRT SPLITTER V3 WINGLETS KIT INCLUDES:
MK6 Golf GTI side skirt splitters (pair)
2 Flow Designs stickers
Fitting kit
MK6 GOLF GTISIDE SKIRTSPLITTER V3 MATERIAL & FINISH: