GTI/GTD

Description:

Description:

Get the latest in performance aesthetics with Leyo Motorsports light weight aluminium engine fluid caps. Made from the finest raw materials, these fluid caps will add that clean modified look to your engine bay without the messy installation. Designed in-house by our technical team, these caps are built to perfection to seamlessly integrate with your vehicle engine bay.

We offer four unique caps for the oil filler neck, the coolant reservoir, the brake fluid reservoir and finally the windshield washer tank. Changing these under the bonnet will add that unique personal touch and create an engine bay you’d be proud to show off with the confidence of performing better than the OEM parts. To make installation as simple as possible, we’ve included an Allen Set screw wrench for your new aluminium engine compartment oil caps.

Don’t wait, get the stylish appearance your car deserves from Leyo Motorsport today.

Specifications:

• Constructed from T6061 Billet Aluminium for strength.

• Hard coated anodized finish.

• Visual improvements to the engine bay.

Available for all accessory cap looks like this.

WASHER FLUID RESERVOIR CAP

Description:

Introducing a world first, foldable paddle shift extension by Leyo Motorsports, the "Pro" series.

Now you see it, now you don't. Just by flicking your fingers, the extended arms of the extension can now be stowed away from the sight. Perfect for long distance drives or while stuck in the morning commute, no more taking your hands off the steering wheel to play around with fidgeting gadets.

Note, while it may be fun, please don't let it distract you from driving.

Specifications:

• Foldable paddle shift extension. 

• The ultimate addition to your performance vehicle.

• Patented design (Pending).

• Direct OEM bolt-on. Clips right over existing paddle shifters.

• Comes with all components required to get your car looking amazing.

• Ergonomic back CNC surface. 

• Scratch Free for your OEM plastics paddle.

• Undergoes 6 stage hand polishing.

Description:

Description:

Description: 

Get the latest in performance aesthetics with Leyo Motorsports light weight aluminium engine fluid caps. Made from the finest raw materials, these fluid caps will add that clean modified look to your engine bay without the messy installation. Designed in-house by our technical team, these caps are built to perfection to seamlessly integrate with your vehicle engine bay.

We offer four unique caps for the oil filler neck, the coolant reservoir, the brake fluid reservoir and finally the windshield washer tank. Changing these under the bonnet will add that unique personal touch and create an engine bay you’d be proud to show off with the confidence of performing better than the OEM parts. To make installation as simple as possible, we’ve included an Allen Set screw wrench for your new aluminium engine compartment oil caps.

Don’t wait, get the stylish appearance your car deserves from Leyo Motorsport today.

Specifications: 

• Constructed from T6061 Billet Aluminium for strength.

• Hard coated anodized finish.

• Visual improvements to the engine bay.

COMPATIBLE VEHICLES

VOLKSWAGEN

Year	Model	Gen	Engine
2012-2019	Golf	MK7/7.5	1.8 TSI
2012-2019	Golf	MK7/7.5	2.0 TDI
2013-2019	Golf GTI	MK7/7.5	2.0 TSI
2014-2019	Golf R	MK7/7.5	2.0 TSI
2014-2019	e-Golf	MK7	Electric Motor
2015-2019	Golf SportWagen	MK7/7.5	1.8 TSI
2015-2019	Golf Alltrack	MK7/7.5	1.8 TSI

Available for all accessory cap looks like this.

OIL CAP

WASHER FLUID RESERVOIR CAP

COOLANT RESERVOIR CAP

BRAKE FLUID RESERVOIR CAP

Description:

Add a touch of elegance to your center console by replacing the factory shift knob with this beautiful Leyo Billet DSG shift knob.  Our shifting mechanism pays homage to manual transmission cars injecting a sense of fun when shifting.   To shift, simply wrap your hands around our beautifully crafted shift knob and lift up the lever with your fingers to disengage the lockout. 

The main knob is CNC’d from a single block of billet aluminum and then undergoes a six stage manual polishing.  It is then anodized to offer protection to the aluminum from sweaty palms while also producing a classy hue.  Available in Black or Silver, these shift knobs are a must have for your precious ride. 

Specifications:

• Shifting at your fingertips.
• Easy installation.
• Anodize in Black or Silver.

COMPATIBLE FACTORY SHIFT KNOB

VOLKSWAGEN

AUDI

SKODA

Description:

Product Description

• Direct OEM replacement
• Made from the highest quality Aircraft quality T6061 billet aluminium construction
• Fully compatible with OEM electronics
• Fully serviceable piston
• Capable to 600HP (with uprated spring kit)
• Utilising world leading springs for more precise operation and consistency
• All internal and external components have been made in the UK
• Pistons use heat stabilised Viton O-rings
• Lubricated with high temperature Mobil1 grease
• Fully serviceable and rebuildable in minutes
• Unlike other valves on the market, ours produce no check engine lights (EML)
• Improved dynamic throttle response
• Consistent turbo boost & reduced turbo lag
• Covered by the Forge Lifetime Warranty*

This valve is designed to fit the FSI and TSI engines of the VAG group (VW, Audi, Seat, Skoda) listed below, including the 2011-2013 2.0l engine using the IHI Turbo.

• 1.4T (with additional fitting kit FMBGFK3)
• 1.8T
• 2.0T

Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB. We designed the slots in the body to cover a large surface area, allowing for a quick release of air, resulting in a unique sounding dumpvalve.

This upgrade/replacement for your original equipment valve integrates seamlessly with the OEM electronics. Using a wiring harness and solenoid, both tested for each specific application, you can confidentially fit a Forge part knowing that there will be no fault codes, check engine lights, or performance issues with the vehicle!

Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable.

The OEM valve uses a rubber diaphragm and a plastic housing. Both of these materials, but especially the rubber is prone to failure. The rubber can stiffen and go brittle due to the heat from the engine, resulting in diaphragm splitting and boost leak.

Our valve uses full billet alloy construction with a piston based internal design, meaning the issues with the OEM can never happen with ours! To give you even more peace of mind, we made the internals of our valve serviceable. We recommend doing this every 3 years or 20,000 miles, whichever comes first. However, if you don’t want to service your valve yourself you can order the kit and ship your valve back to us and we will carry out the service free of charge! Simply contact us to arrange the service!

The OEM valve internals can also fail if you have your vehicle mapped as the rubber diaphragm is not always strong enough to cope with the increased boost pressure. We build our valves with a spring matched to the original pressure of the car, but include in the kit a spring strong enough to cope with a stage one remap. If you decide to increase the power even more you can guarantee the reliability of our valve by using this spring tuning kit!

This valve was designed by our highly skilled engineers using CAD software to ensure that it will fit with every listed compatible vehicle with ease! 

It is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis. Compared to competitors our valve has a much shorter overall installed height.

The OEM part numbers we have replaced with our valve include:

• 06H145710B
• 06H145710C
• 06H145710D
• 06H145710F
• 06H145710G

Product Description

Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit (FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi.

This valve represents the latest evolution of part number FMFSITVR, The result is a full replacement recirculating valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement atmospheric valve option, the FMFSITVR and FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak.

Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location.

The FMFSITVR valve has a much shorter overall installed height, which enables fitment of this recirculating valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products.

Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB

In The Box:
1 x FMFSITVR Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x PCV Adaptor Kit
1 x Blue Spring (Uprated)
10 x Cable Ties
1 x 2000mm Length of 4mm Vac Hose
1 x Instruction Booklet
1 x Forge Keyring and Sticker

If you are unsure if this product is suitable for your application, please contact us.