GTI/GTD - CTS Turbo - New South Performance - P3 Cars - INA
The CTS Turbo TSI Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle.
Our Turbo Outlet Pipe features 2.25" diameter aluminum tube for optimized flow. The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap. The billet anodized turbo to TOP connector, 2.25" coupler and premium clamps top this package off. If you're looking for a simple bolt on modification that will optimize flow and increase power, then this part is for you.
Audi |
TT |
MK2 (2008-2015) |
2.0 TSI |
Audi |
A3 |
8P (2009-2013) |
2.0 TSI (FWD) |
Volkswagen |
Tiguan |
(2009-2011) |
2.0 TSI |
Volkswagen |
Tiguan |
(2012+) |
2.0 TSI |
Volkswagen |
Jetta |
MK5 (2010) |
2.0 TSI |
Volkswagen |
Jetta |
MK6 Sedan (2011-2017) |
2.0T GLI |
Volkswagen |
Jetta |
MK6 Sportwagen (2010-2017) |
1.8TSI/2.0TSI |
Volkswagen
Volkswagen
|
Jetta
Golf/GTI/Rabbit
|
MK6 Sedan (2014-2017)
MK5 (2009)
|
1.8TSI/2.0T GLI
2.0 TSI
|
Volkswagen |
Golf/GTI/Rabbit |
MK6 (2010-2014) |
2.0T |
Volkswagen |
CC |
(2009+) |
2.0 TSI |
Volkswagen |
Beetle |
Beetle (2012+) |
2.0 TSI |
CTS Turbo is proud to announce an official release of our new K04 Upgrade for 2.0T FSI/TSI Transverse Engines.
Our engineers designed the compressor cover and exhaust housing to work with the larger K04 CHRA, exactly how intended. While other manufacturers simply install a larger K04 CHRA into a small factory-spec housing.
Beware of these hybrid builds, they are not made to provide optimal flow for the larger turbine wheel and can lead to poor performance and premature failure.
High-quality castings are CNC machined to replace your factory turbocharger and do not require any additional parts to be installed. All you need to run this K04 2.0T FSI/TSI Transverse Turbocharger Upgrade is a tune for your ECU and a performance downpipe.
This kit is by far the best ‘bang for the buck’ modification available for VW and Audi enthusiasts with the 2.0T FSI and 2.0T TSI engine. With proper tuning and supporting mods, this turbo will support 350HP/360TQ!
Features:
CTS-spec K04 CHRA with heavy-duty thrust bearings
Billet compressor wheel (MFS – machined from solid)
K04-specific compressor and turbine housing. NOT A HYBRID!
OEM+ manufacturing tolerances
VSR high-speed balanced
Direct-fit factory replacement
OEM installation kit included
Compatible with any K04-specific tune
Compatible with factory turbo outlet pipe (both FSI and TSI). Not compatible with aftermarket stock turbo outlet pipes
ROW vehicles, please confirm fitment with your CTS Turbo dealer.
Additional parts required:
K04-specific software tuning
CTS Turbo or other performance downpipe
Additional parts recommended:
CTS Turbo Cold Air Intake
CTS Turbo Direct-Fit Intercooler Kit
CTS Turbo High Flow Turbo Outlet Pipe (EA888 only)
S3 Fuel Injectors and HPFP upgrade (EA113 engines only)
Sale
Dual port boost tap allows for multiple boost references
CNC machined from 6061 Aluminium
Brass plug included
Regular Price:
$89.95
Special Price
$79.95
Sale
MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015)
8V Audi A3/S3 (up to production date Sept 27, 2015)
MK3 Audi TT/TT-S (up to production date Sept 27, 2015)
Regular Price:
$79.95
Special Price
$65.00
Mandrel bent aluminum piping with durable black powder coating
- CNC machined MAP flange
- 4 Ply silicon connectors with stainless steel clamps
- Integrated water methanol bung with plug
- Stainless steel clamps
Audi - S1 EA888 Gen 3 - 2.0 TFSI
Audi - A3 & S3 (MK3) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI
Audi - A4 / Allroad (B8 & B8.5) - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - A5 (B8 & B8.5) - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - A6 (C6 & C7) - EA888 Gen 2 - 2.0 TFSI
Audi - Q5 - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - TT / TTS (MK3) - EA888 Gen 3 - and 2.0 TFSI
VW - Golf / GTI / R (MK7) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI
DESCRIPTION
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler.
Product Details:
60mm aluminum piping with CTS logo
5-ply silicon coupler
Factory mounting points are used for perfect fitment
Durable black powdercoat finish
For 7-speed DSG/S-tronic transmissions only
Compatible with factory and upgraded turbos
Compatible with factory and upgraded intakes
Compatible with factory and upgraded intercoolers
Parts Included:
Upper turbo outlet silicon
Lower turbo outlet pipe
2 clamps
Installation hardware
Fitment:
2018+ VW Golf R DSG 7-speed
2019+ VW GLI DSG 7-speed
2019+ VW GTI DSG 7-speed
2018+ Audi A3 S-Tronic 7-speed
2018+ Audi S3 S-Tronic 7-speed
2018+ Audi TT, TT-S S-Tronic 7-speed
NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275
Sale
We are proud to announce the release of our premium ball-bearing hybrid turbo with stainless steel exhaust housing for 2015+ MQB platform vehicles.
This high-performance hybrid turbo was designed by CTS engineers to fulfill the demand from customers who desire a direct-bolt-on turbo for their existing IS12, IS20 or IS38 turbocharger. Instead of trying to stuff a CHRA from a Mitsubishi into a factory housing; we re-designed and cast our proprietary STAINLESS STEEL exhaust housing to accommodate a larger turbine wheel. The compressor cover was also custom made and profiled to accept a very popular TD06 Billet compressor wheel, this ensures the turbocharger can reliably handle 30+ PSI. We upgraded the CHRA to a dual-ball bearing which is made from heat-resistant ceramic. Finally, we finished the assembly by balancing it on a VSR high-speed balancer.
This is a brand new turbocharger; no core or long wait times are required. Simply swap over your actuator and turbo outlet fitting for installation. Software tuning is required and it is available from most tuners.
Features:
- Complete brand new turbocharger; no need for core to be sent it or purchased
- Dual ceramic ball bearing direct-fit CHRA (compatible with all factory oil and coolant lines)
- Billet MHI-style TD06 compressor wheel
- High performance 9 blade turbine wheel
- Stainless steel turbine housing
- VSR Balanced to exceed OE tolerances
- Compatible with most tuning solutions for hybrid turbos (United Motorsport, Eurodyne, COBB)
- Compatible with OE or replacement wastegate actuators (CTS-WGA-200 actuator recommended)
- Compatible with OE or aftermarket turbo inlets and turbo outlets
Fitment:
- 2015+ VW Golf/Sportwagen/Alltrack
- 2015+ VW GTI
- 2015+ VW Golf R
- 2019+ VW Jetta GLI
- 2018+ VW Arteon
- 2015+ Audi A3
- 2015+ Audi S3
- 2015+ Audi TT
- 2015+ Audi TTS
NOTE: Always follow the proper procedure for checking/adjusting the wastegate actuator when installing the turbo! Always replace engine oil.
Gaskets, wastegate actuator, turbo outlet fitting not included.
Regular Price:
$2,999.00
Special Price
$2,399.00
The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold.
The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.